openmediavault

The open network attached storage solution

News

  • New

    Hi,

    Sorry if this is a noob question since I'm new to Unix based systems. But uhh is there a way I can directly read and write floppy disks via my fileserver? The motherboard of my fileserver is soon the only motherboard that has a actual floppy connector and where I work we still have some super expansive machines that write their data on floppy disks.

    So is there a way I can mount my floppy disk like I can mount a USB hard drive or do I really need to mess with Docker or Virtualbox just to read and write a floppy disk?

    And before someone asks, a USB FDD is not a option. Too unreliable and I already have 2 that don't work properly/reliably.
  • New

    After my old QNap with OMV 3 overcome its lifecycle i am looking for a small installation for a backup system with one Harddisk, running OMV 4/5 and simply rsync'ing my home-nas providing the backup via nfs/cifs.

    I think I do not have high demands, looked for a Odroid HC2 while having a ironwolf 8TB Harddisk at hand. But in Germany it seems to be sold so I need alternatives ... what else Setup seems to be suiteable? Looked for RockPro64 but dont know if attaching Sata Drives Via USB3 is good / performant. Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ... What do I have to buy to run it 24/7 and where? Is there something else leke the HC2, while i like the dedicated straight design ...

    Micha
  • New

    hello,
    first, i hope everybody will understand my poor english ;)
    i found many thread speaking about modifying parameters in monit configuration, but i didn't found a thread about adding a new entry.
    I just want to monit with a network ping test if a device is connected or not on my network, and if not, send an alert.
    I thought it was exactly what monit does, that is why i want to add a service in monit. but i don't know which file adding/modifying to do this being sure that omv will not reset all i have done when reboot.
    thank you in advance for your help
  • New

    Hello,

    I've recently configured sonarr, radarr, jackett, and deluge. I followed Technodad's youtube videos. It took me a little while but I finally got sonarr and radarr working properly and they send everything over to deluge to download. The issue is that deluge isn't actually downloading anything. I used to to have an "error" message which I seem to have fixed by changing the download directory (hopefully it's correct now). Now the word "error" has been replaced with "downloading" but still nothing happens.
    I configured qbittorrent and I'm getting the same issue. I don't know if the problem might be related to my router but torrent downloading works perfectly fine on my windows machine.

    Here is a screenshot of what qbittorrent looks like.
    imgur.com/a/2Yvidf7

    Can't seem to find anything on google and the few guides regarding using torrent clients for OMV don't ever mentioning configuring any of this crap which leads me to believe it should normally just work out of the box?

    I…

Unread Threads

Topic Replies Last Reply

Downloads not working for torrents

6

gderf

How to backup and restore OMV configuration ? BMR Plan - howto?

0

Rock64 in drawer “pc case”, heating problem?

1

tkaiser

The Class E Network

504

ryecoaaron

Virtualbox VNC Issue

8

ryecoaaron

Recent Activities

  • gderf -

    Replied to the thread Downloads not working for torrents.

    Post
    Very nice job on the screenshots, all in one place. What hardware platform are you running on and which deluge docker are you using? In your Deluge Network settings you can not use random incoming ports. You must specify at least one port and that port…
  • akurzawa -

    Posted the thread OMV 4.x How to backup and restore OMV configuration ? BMR Plan - howto?.

    Thread
    How to backup OMV configuation to restore settings after disaster recvery? Case: OMV installation is destoyed, I've all the data on separate partition, I want to quickly install fresh OMV from DVD and restore config for network, shares etc. so I can get…
  • itsmyst -

    Replied to the thread Downloads not working for torrents.

    Post
    So you're definitely right that it's a permission's based problem. I went into the config folder for qbittorrent (thinking, hey, if it can write everything to here then why the hell can't it write to my download folder which I've setup the same way?) In…
  • tkaiser -

    Replied to the thread Rock64 in drawer “pc case”, heating problem?.

    Post
    Quote from Chrisjay: “But is it necessary? ” Most probably not. You can simply measure once the stuff arrived: Source Code (2 lines)The former will output SoC thermals and the latter HDD temps. I wouldn't be concerned if idle temperatures do not…
  • itsmyst -

    Replied to the thread Downloads not working for torrents.

    Post
    I may not be running an updated version of deluge as mine definitely doesn't look like that! imgur.com/a/VazqpiS Also I should mention that I've tried using both the relative and absolute paths when setting the download folder in deluge or qbittorrent.…
  • gderf -

    Replied to the thread Downloads not working for torrents.

    Post
    That setting is still there. See attached pic. You are using an incorrect download path. You are trying to use a host path in there and you need to use a container path. Post the screenshot of your Modify container screen Environment variables and…
  • itsmyst -

    Replied to the thread Downloads not working for torrents.

    Post
    From what I can see they seem to have removed that option in Deluge. Is there a guide on how to configure Deluge specifically from the perspective of running it on OMV? Other than changing the download path I haven't really gone in and tried to change…
  • ryecoaaron -

    Replied to the thread The Class E Network.

    Post
    Quote from flmaxey: “Well that didn't work out very well. While going through the script process..... ” Volker's OMV5 instructions will probably have to change since you can't add a repo without a key (unless you put trusted in the repo line but…
  • ryecoaaron -

    Replied to the thread OMV 4.x Virtualbox VNC Issue.

    Post
    Quote from marcsgirall: “So I’ve been trying to find the ConsoleImpl.cpp file to patch & I can’t for the life of me find it in the plugin version of VBox. ” As I posted in the other thread about this, I built the packages and put them here -
  • ryecoaaron -

    Replied to the thread OMV 4.x Read floppies directly from OMV.

    Post
    Quote from Rickboy333: “But uhh is there a way I can directly read and write floppy disks via my fileserver?” Sure but not via the OMV web interface. You would do it just like any other Linux box. Assuming the disk was formatted on Windows and one…