openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

Unread Threads

Topic Replies Last Reply

disk unmounted alone

11

klunkerbus

incorrect password for connect via putty !?

4

sajjads24

OMV keeps waking up a couple of seconds after going to suspend

3

tinh_x7

Motherboard suggestion for OMV with PLEX transcoding

8

tr3bjockey

Upgrading from USB stick drive to SSD in a USB enclosure. Can I do this and keep everything?

5

robster

Recent Activities

  • klunkerbus -

    Replied to the thread OMV 4.x disk unmounted alone.

    Post
    @Sylvania - how did this pan out for you? I've ran into the missing disk and unmounted disk twice now on my HC2 with a WD 4TB drive. Were you able to somewhat prove that messing with the disk properties was causing the problem?
  • sajjads24 -

    Replied to the thread OMV 4.x incorrect password for connect via putty !?.

    Post
    problem with etcher i am use Win32DiskImager-0.9.5-binary for install on sdcard so all things good ♥. Win32DiskImager-0.9.5-binary better than etcher.
  • sajjads24 -

    Liked macom’s post in the thread OMV 4.x incorrect password for connect via putty !?.

    Like (Post)
    Quote from syrusstk: “root password you set during the install ” That is the case when you install from an ISO. If you use an image, the credentials are given on the download page at SF: web interface: - username = admin - password =…
  • tinh_x7 -

    Replied to the thread OMV 4.x OMV keeps waking up a couple of seconds after going to suspend.

    Post
    Different motherboard, different settings. Refer to your motherboard manual.
  • disrupted -

    Liked henfri’s post in the thread OMV 2.x Nginx Connection failed.

    Like (Post)
    Hello, I have the same issue. I have changed the monit config to: Shell-Script (7 lines)(I changed the last line) I have no operational experience with this yet though. Greetings, Hendrik
  • tr3bjockey -

    Replied to the thread OMV 1.0 Motherboard suggestion for OMV with PLEX transcoding.

    Post
    Quote from TheLostSwede: “Just out of curiosity, have you had a look at Emby as an alternative to Plex? I found it to be a lot nicer to use, despite no native app support on my smart TV. ” I've heard a lot of good things about Emby. Would their be a…
  • Excellent thank you. I assume I simply need to name the shared folders the same to have them appear with all their data intact etc? As soon as the new boot disc arrives (doing an upgrade to an m.2 in a USB enclosure) I'll try that. Much appreciated.
  • geaves -

    Replied to the thread OMV 2.1 raid5 missing after blackout.

    Post
    You could try stopping it even though it says inactive then try reassembling it.....bit it's not showing 2 drives /dev/sd[bc] which could mean the raid is dead, which if it is your data's gone.
  • jollyrogr -

    Replied to the thread OMV 2.x Resolved SNAPRAID+AUFS Replacing disks.

    Post
    Whenever I have snapraid questions I find it's helpful to read the documentation on the snapraid website. I don't do things like disk replacement often enough to remember the procedure. To replace a data disk: snapraid.it/faq#repdatadisk
  • piratx -

    Replied to the thread OMV 2.x Resolved SNAPRAID+AUFS Replacing disks.

    Post
    Hello, I am replying to this old thread cause I tried to do the same thing (replacing an old drive with a new one). So basically my setup is as follows: SnapRAID with unionfilesystems on OMV 4.1.11 Arrakis 5 drives on right now named (not cool) but in…