openmediavault

The open network attached storage solution

News

  • New

    Hi everyone!

    I'm trying to setup a system with openmediavault 4.1.13. I am currently inside a university, whose network requires a two-step authentication to access internet. First, you have to connect to a wireless network, then opening a browser reveals a mask with user:---- and password:----, which are provided to university personnel and are personal.

    Is there a way to connect to a network like this to install plugins and updates? Connecting via an Ethernet cable and setting a fixed IP lets me use the webinterface, but since there is no internet connection I can only use the standard functionalities.

    Thank you in advance!
  • New

    Hi,

    my raid fail, i'd like to destroy it to use mergeFS.
    But it's always say it's busy, so i can't delete it in OMV.

    In the peripheral (sorry, maybe not the right word, i use OMV in french), i see the raid peripheral, but the status is "missing" and i can't do anything (no unmount, no delete etc)

    Thanks for your help , i can't make other file system or anything since the raid fail (but i still got acces to my data and btw, they are backuped on another NAS)
  • New

    Hallo zusammen,

    hat jemand von euch Autoshutdown im Betrieb?
    Ich habe eine Frage zur Konfiguration:
    Ich möchte mein NAS herunterfahren (in Standby versetzen) lassen, wenn bestimmte Geräte nicht mehr an (per Ping nicht erreichbar) sind.
    In der Konfig für Autoshutdown kann ich IPs angeben, aber auch Ports. Jetzt frage ich mich : prüft das Plugin nur, ob auf dem bestimmten Port zwischen NAS und den angebenen IPs Traffic/Aktivität ist, oder wie ist das mit den Portangaben zu verstehen?

    Müsste ich dann den SMB-Port angeben? Allerdings ist dort ja nicht ständig traffic bzw. vermute ich, dass die connection irgendwann getrennt wird, wenn längere Zeit nicht genutzt.

    Bin gespannt auf eure Antworten.
  • New

    I am trying to set up a scheduled Rsync job using the OMV Users Guide (page 61 & following). Here is the job I created:

    When I run the job I get the following error:

    Going back to my file systems I discovered that both of my disks are not referenced:

    How can that be when I have five shared folders attached to disk1?

    What am I doing wrong?

Unread Threads

Topic Replies Last Reply

Raid fail : how to destroy it ?

11

bart70

The Class E Network

411

geaves

Pi-Hole - Network wide Ad blocking

54

ryecoaaron

Connect to network that requires user and password (hotspot-style)

1

ryecoaaron

Transmission script to cleaning up completed torrents

0

Recent Activities

  • bart70 -

    Replied to the thread OMV 4.x Raid fail : how to destroy it ?.

    Post
    is system-rescue-cd.org/ fine ? but i wont have a GUI, so i'll have to destroy the raid with command lines and i don't know how to do (i guess you already realized i'm a bit noob in linux ;) )
  • ryecoaaron -

    Replied to the thread OMV 4.x Raid fail : how to destroy it ?.

    Post
    Quote from bart70: “I got an old usb key to boot on it, how can i find a easy rescue CD ? ” system-rescue-cd.org/
  • bart70 -

    Replied to the thread OMV 4.x Raid fail : how to destroy it ?.

    Post
    i removed all excepted a share (not in samba, the share for the users acces) because i can't... I've looked about the rescue CD in omvExtras, i can't find too :( I got an old usb key to boot on it, how can i find a easy rescue CD ? and ... THANKS AGAIN…
  • geaves -

    Replied to the thread The Class E Network.

    Post
    Quote from ryecoaaron: “Sounds like something is seriously wrong with your pi-hole install. I would get it working (re-install?) with cloudflare or something before trying to switch to unbound. ” I don't mind doing a reinstall and switching…
  • ryecoaaron -

    Replied to the thread The Class E Network.

    Post
    Quote from geaves: “I tried that a couple of times and for some reason the settings would fail....like changing the custom dns entry first I tried 192.168.1.40#5353, then 192.168.1.40#53, saving after each change, then after your comment to not add the…
  • geaves -

    Replied to the thread The Class E Network.

    Post
    Quote from ryecoaaron: “Enable DHCP in pi-hole. Settings -> DHCP lets you enable it. ” I tried that a couple of times and for some reason the settings would fail....like changing the custom dns entry first I tried 192.168.1.40#5353, then…
  • ryecoaaron -

    Replied to the thread The Class E Network.

    Post
    Quote from geaves: “So run the plugin on my Pi and not on the main OMV box. ” No. I am saying don't use the dnsmasq plugin at all. Enable DHCP in pi-hole. Settings -> DHCP lets you enable it.
  • ryecoaaron -

    Replied to the thread OMV 2.x Pi-Hole - Network wide Ad blocking.

    Post
    I doubt you need to automate this task. That list is the 13 root dns servers. I think they have only changed a couple of times in the last couple of decades.
  • geaves -

    Replied to the thread The Class E Network.

    Post
    Quote from ryecoaaron: “Why not enable dhcp on your pi-hole box? I am. Then you don't need the dns plugin. ” So run the plugin on my Pi and not on the main OMV box. The Pi is currently throwing a wobble doing an apt clean, so trying to sort that out.
  • jollyrogr -

    Replied to the thread OMV 2.x Pi-Hole - Network wide Ad blocking.

    Post
    I had not thought about automating the update but that sounds like a good idea.