openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    Hi I'm having some peculiar issues with SMB connection not closing when I shut down the PC. I have the autoshutdown plugin installed and it monitors port 445 for active connections, the problem is that the autoshutdown does not put the OMV server into standby because it detects an active connection on the SMB port up to 1.5 hours after my main PC (Win 10, IP 192.168.0.101) has been turned off:

    Source Code

    1. autoshutdown[15439]: INFO: ' _check_net_status(): Found active connection on port 445 (SMB/CIFS) from 192.168.0.101'
    2. autoshutdown[15439]: INFO: ' Found 1 active socket(s) from Port(s): 21,22,80,139,445,3689,6991,9091,49152'
    3. autoshutdown[15439]: INFO: ' sleep for 300s.'
    I'm assuming that this is caused by the windows 10 machine not properly closing the SMB session when it turns off? Could I somehow force a timeout for idle connections in OMV's SMB configuration?
  • New

    Hi,

    i found a problem with TeamViwer Host plugin. I have seen, that the parsing is not working anymore. TeamViewer is generating id longer than 9 signs, so the displayed TeamViewer ID in OMV UI is not valid. I have changed a code file and everything is fine:
    Console command: nano /usr/share/openmediavault/engined/rpc/teamviewerhost.inc
    Replace the following line:
    OLD : $cmd = 'teamviewer info | grep "TeamViewer ID:" | tr -d "[:cntrl:]" | tr -d " " | tail -c9';
    NEW: $cmd = 'teamviewer info | grep "TeamViewer ID:" | tr –s " " | cut –d " " –f 5';
  • New

    Hello.

    I am thinking of moving TVHeadend from my x86 server to something a more power friendly.

    My obvious first choice was a RPi 3B+ but lots of advice on here seems to favour the Rock64.

    Is this going to be a suitable choice for me?

    What I need is something that can power a s 2.5" hard drive and can use a Digbit R1 for recording.

    I did read that Odroid also offer some devices with similar capabilities but have a higher idle draw.

    Any advice/recommendations would be much appreciated.

    Edit

    My current x86 server contains 3 storage HDDs and an SSD.

    I have leaving it on all the time, just to make recordings, as I only really use it for streaming for a couple of hours a night during the week.

    My plan was to have an ARM device (like the Rock64) for all my scheduling of recordings and watching them back and then manually turn on the server whenever it was actually needed.

    However, I note that this is being mentioned a few times on here:

    kobol.io/helios4/

    It is not cheap but do…

Unread Threads

Topic Replies Last Reply

Rsync startet nicht als cronjob --- rsync-cronjobs don't start

13

macom

SMB connection stays active even though PC is shut down?

0

Helios4 -- community developed ARM 4 bay NAS device received important upgrade

52

iNTiGOD

Remove Certificate settings

10

Mike_L

TeamViewer Host Plugin not working anymore

0

Recent Activities

  • macom -

    Replied to the thread OMV 1.0 Resolved Rsync startet nicht als cronjob --- rsync-cronjobs don't start.

    Post
    Zeig doch mal einen Screenshot von deiner rsync Konfiguration in OMV. Vielleicht fällt da schon was auf.
  • jackster -

    Posted the thread OMV 4.x SMB connection stays active even though PC is shut down?.

    Thread
    Hi I'm having some peculiar issues with SMB connection not closing when I shut down the PC. I have the autoshutdown plugin installed and it monitors port 445 for active connections, the problem is that the autoshutdown does not put the OMV server into…
  • Hey I pulled open my kit today excited to assemble. To my disappointment one of the fans is broken (fins are snapped). Does anyone have a link where I can purchase a replacement pwm fan? I've taken a look on aliexpess and ebay but can find an exact…
  • tnt-nitro -

    Replied to the thread OMV 1.0 Resolved Rsync startet nicht als cronjob --- rsync-cronjobs don't start.

    Post
    Es ist jetzt zwar schon einige Zeit her das hier das Thema angegriffen wurde aber ich habe jetzt auch ein solches Problem und bin duch google hier gelandet. Vieleicht liest ja noch jemand mit und kann mir weiter helfen. Ich habe das Problem das ich…
  • Mike_L -

    Replied to the thread OMV 3.x Remove Certificate settings.

    Post
    Hi phanter, sorry - I've seen your posting yesterday ... little bit late ;) I ran into the same problem again after renewing the certificate yesterday. Nothing worked anymore ... no commits of changes Web-UI possible. After a reboot nginx did not start…
  • m1l0 -

    Posted the thread OMV 4.x TeamViewer Host Plugin not working anymore.

    Thread
    Hi, i found a problem with TeamViwer Host plugin. I have seen, that the parsing is not working anymore. TeamViewer is generating id longer than 9 signs, so the displayed TeamViewer ID in OMV UI is not valid. I have changed a code file and everything is…
  • m1l0 -

    Replied to the thread OMV 3.x Resolved Teamviewer host not changing password.

    Post
    Hi, i had the same problem with this plugin, but i have seen, that the parsing is not working anymore. TeamViewer is generating id longer than 9 signs, so the displayed TeamViewer ID in OMV UI is not valid. I have changed a code file and everything is…
  • ajaja -

    Replied to the thread OMV 3.x Upgrade 3.x -> 4.x Where is the pinned thread that explain how to upgrade OMV 3 -> OMV 4.

    Post
  • odinb -

    Replied to the thread OMV 4.x Resolved Upgrade 3.x -> 4.x VirtualBox causing omv-engined[10089]: segfault.

    Post
    Ok seems no one have a good answer for this one, so I went ahead and played around a bit, and it is now working. What I did: 1. Copied the VDI file from the VM-folder to a backup location (in my case:…
  • m1l0 -

    Replied to the thread Probleme mit Flash Memory Plugin.

    Post
    Alles klar, dann lass ich das optionale mal weg. Bin mir auch nicht wirklich sicher was Bereitschaft bei OMV ist, wenn ich die UI mit englischer Sprache nutze, steht dort zumindest nur "Standby" und das ist ja definitiv von der Begrifflichkeit her…