openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    Hi!

    Over time I've built my x86 homemade NAS with openmediavault 4, and I've reached a pretty good overall state with that!

    I usually download and transfer a lot of files on that, especially over my several external Hard drives. I mounted my shares through SMB, and is everything working pretty well (copy and pasting files is fast and reliable)

    And here is where it come my issues: when I plug in my USB memories peripherals, I have to mount them manually through the OMV webinterface, then I have to move the files manually through shell to the external hard disk (that obviously can't be put on a 'Shared folder' through the OMV interface).

    This is pretty horrible, and is getting me very pissed every time I have to copy an serious amount of files in and out my NAS. Is basically my only flaws against a fantastic project I (or I shall say we?) made.

    I've searched on the forum for advices, but I've only found an useful thread that talk about a 'usbmount package', but I can't find it on…
  • New

    Hi Everybody,

    yesterday I finally managed to get started with building my own OMV NAS on the HC1.

    Everything works fine, except I can`t get VLAN interfaces up.
    Seems to be an issue with the nic name lenght, since "predictable network interface names" includes the whole mac-adreess in the nic name instead of shortening it.

    The parent if itself gets up, but if you add a vlan sub-if syslog throws an name lenght related error.

    Is there any possibility in OMV4 to change the nic name to something shorter to get this working again?
  • New

    Hello

    I used a 512g ssd for the OMV main drive and could really use that space in another project so I want to use a smaller ssd.

    The backup options within OMV seem very complicated, can I not simply clone one drive to the other outside of OMV?

    I bit in the back of my brain says GRUB with ruin it all but not sure?
  • New

    Hi there,

    I installed Bazarr (github.com/morpheus65535/bazarr/wiki/Installation---Docker) through Docker and it seems to run fine with one exception: Bazarr says for every TV Show that the path seems to be invalid (Don't have Radarr so can't say if movies would work). The path shown is correct and the same as in Sonarr. The logs didn't help since there is no mention of any problem concerning paths and directories.

    When starting the Docker image I set the path to the directory where all my TV Shows are (see screen). Am I doing anything wrong?

Unread Threads

Topic Replies Last Reply

Automount USB memories (and show them up on SMB)

2

gderf

Odroid HC-1 VLAN Issue

0

How to set OMV to boot Clonezilla once via Shell?

6

ryecoaaron

Unable to install remotedesktop because newer xrdp require

1

ryecoaaron

[HOWTO] Instal ZFS-Plugin & use ZFS on OMV

799

Frank Zhu

Recent Activities

  • gderf -

    Replied to the thread OMV 4.x Automount USB memories (and show them up on SMB).

    Post
    The usbmount package was very useful to me and I recommended it highly back in the days of OMV 2.x and 3.x. However, with the arrival of OMV 4.x which is based on Debian Stretch, usbmount was rendered broken. Some Stretch users have posted workarounds…
  • ryecoaaron -

    Replied to the thread OMV 4.x Automount USB memories (and show them up on SMB).

    Post
    Quote from MioCuggino: “but I've only found an useful thread that talk about a 'usbmount package', but I can't find it on 'Plugins' neither anywhere else. ” It is a Debian package not a plugin. You would install it from the command line. Quote from…
  • MioCuggino -

    Posted the thread OMV 4.x Automount USB memories (and show them up on SMB).

    Thread
    Hi! Over time I've built my x86 homemade NAS with openmediavault 4, and I've reached a pretty good overall state with that! I usually download and transfer a lot of files on that, especially over my several external Hard drives. I mounted my shares…
  • DaTaCoRe -

    Posted the thread OMV 4.x Odroid HC-1 VLAN Issue.

    Thread
    Hi Everybody, yesterday I finally managed to get started with building my own OMV NAS on the HC1. Everything works fine, except I can`t get VLAN interfaces up. Seems to be an issue with the nic name lenght, since "predictable network interface names"…
  • ryecoaaron -

    Replied to the thread OMV 3.x How to set OMV to boot Clonezilla once via Shell?.

    Post
    Quote from KOENICH: “omv-grubiso does not sem to exist on my OMV installation ” I didn't notice you were using OMV 3.x. omv-mkconf omvextras rebootcz
  • ryecoaaron -

    Replied to the thread OMV 4.x Unable to install remotedesktop because newer xrdp require.

    Post
    You must not have backports enabled. There is a button to enable backports in the Repos tab of omv-extras.
  • salopette -

    Liked ryecoaaron’s post in the thread OMV 1.0 openmediavault-domoticz plugin (TESTING v1.0.1).

    Like (Post)
    Quote from mathojojo: “So now I will try with the testing branch of the OMV-extras repo.. ” domoticz 4.9701 and openmediavault-domoticz 3.1 are in the 4.x repo now. The domoticz package was compiled from git since all of the packages available on…
  • Frank Zhu -

    Replied to the thread OMV 1.0 [HOWTO] Instal ZFS-Plugin & use ZFS on OMV.

    Post
    Tried export/reimport the pool. Didn't solve the problem. Any other ideas?
  • macom -

    Replied to the thread OMV 4.x Cloning the drive.

    Post
    Yes, you can clone the drive using clonezilla. You need to use the -icds switch to be able to clone a larger drive on a smaller one. The data on the larger drive have to be smaller than the capacity of the smaller drive of course.
  • garyi -

    Posted the thread OMV 4.x Cloning the drive.

    Thread
    Hello I used a 512g ssd for the OMV main drive and could really use that space in another project so I want to use a smaller ssd. The backup options within OMV seem very complicated, can I not simply clone one drive to the other outside of OMV? I bit…