openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    Hi,

    I have a 4 bay NAS with 2 disk 2TB each.
    I want to configure SnapRaid + UnionFS.

    With SnapRaid:

    Disk1 -> Parity
    Disk2 -> Data + content

    Its says that I need to have 2 content disk at least, what i am suppose to do ? can i set it up like

    Disk1 -> Content + parity
    Disk2 -> Content + Data

    ? is this correct ?

    What about UnionFS ? Can I merge Disk1 and Disk2 as a single disk called "storage" ? or is useless sicne the disk1 is used for parity only ?

    thank you
  • New

    I guess I have noticed this only now since I very rarely reboot my nas.
    Basically it seems one disk does not mount automatically. This is the email I receive from the NAS:

    Source Code

    1. Status failed Service mountpoint_srv_dev-disk-by-label-5A
    2. Date: Tue, 16 Oct 2018 09:32:41
    3. Action: alert
    4. Host: NAS
    5. Description: status failed (1) -- /srv/dev-disk-by-label-5A is not a mountpoint
    6. Your faithful employee,
    7. Monit

    I don't know why this started... but does anybody have a good idea how to resolve?

    Also: how can I completely remove the reference to this disk from the system (so that I can go and add it from scratch)?

    Thanks a lot for your help :)
  • New

    Hi,
    First time poster - be gentle!

    Am looking to setup an MPD server in OMV 4.1.12 using a docker. I've found a docker vimagick/mpd but my attempts to set it up are failing with an error I think is related to Volumes and Bind paths but I don't have enough experience with docker to troubleshoot the problem :S . So I wondered if anyone has written (or would be kind enough to write) a guide or pointers for installing this correctly.

    I think these are the settings I'm trying to figure out in the run image dialog:

    mpd: image: vimagick/mpd ports: - "6600:6600" - "8800:8800" volumes: - ./mpd.conf:/etc/mpd.conf - ./music:/var/lib/mpd/music - ./playlists:/var/lib/mpd/playlists devices: - /dev/snd restart: always

    Thanks.

Unread Threads

Topic Replies Last Reply

SnapRaid + UnionFS NAS with 2 disks

2

arik

Root login issue

28

Jieta25460

Missing file system after upgrade from 3.x to 4.x

13

ryecoaaron

OMV4 - Plötzlich keine Datenfestplatten mehr (Mount-Problem?)

2

hylli

Bitte um Hilfe - Upgrade OMV 3.x -> 4.x

1

WastlJ

Recent Activities

  • arik -

    Replied to the thread OMV 4.x SnapRaid + UnionFS NAS with 2 disks.

    Post
    Thank you very much, this is much clearer now!. So I can setup rsynch and when I will get an additional drive I will setup snapraid with a parity disk setted to the new disk and unionFS will mere the two old disk ( I will clean one ). thank you !!
  • Jieta25460 -

    Replied to the thread OMV 3.x Root login issue.

    Post
    Quote from ryecoaaron: “Sounds like you may have changed something you shouldn't have. ” I didn't touch anything when I don't have knowledge.
  • ryecoaaron -

    Replied to the thread OMV 4.x Upgrade 3.x -> 4.x Missing file system after upgrade from 3.x to 4.x.

    Post
    Those all look fine (you could have run the command I posted to get it all in one :) ) I should have looked at your /proc/mdstat more carefully. Your array assembled but was in auto-read-only. Did you every try mdadm --readwrite /dev/md127?
  • ryecoaaron -

    Replied to the thread OMV 3.x Root login issue.

    Post
    Quote from Jieta25460: “The password has been changed but the page is refresh like I never do something ... ” What is the output of: sudo tail -n20 /var/log/auth.log
  • TechnoDadLife -

    Liked geaves’s post in the thread OMV 4.x Transcode folder for plex docker..

    Like (Post)
    Quote from R0vsvamp: “So if i just create a /transcode folder in my shared folder it should work? ” Provided the container points to that, however, I should read this and this to ensure that it will work, I'm not a Plex user but I have watched some of…
  • Jieta25460 -

    Replied to the thread OMV 3.x Root login issue.

    Post
    Quote from ryecaaron: “The root user always exists. If you can't login as root via ssh, that is not because the root user does not exist. If you can't login locally with the root user, you have the wrong password. So, that is why I said you should…
  • TechnoDadLife -

    Liked gderf’s post in the thread OMV 4.x Transcode folder for plex docker..

    Like (Post)
    Quote from R0vsvamp: “Hi i'm trying to set up my plex on Docker, with the toturial from " Techno Dad Life " Video link . He skips the part with the transcode folder, and in the comment he says: "Just make a transcode folder in your AppData folder. You…
  • ggibeau -

    Replied to the thread OMV 4.x Upgrade 3.x -> 4.x Missing file system after upgrade from 3.x to 4.x.

    Post
    TeX Source Code (27 lines)
  • ryecoaaron -

    Replied to the thread OMV 4.x SnapRaid + UnionFS NAS with 2 disks.

    Post
    Snapraid is like raid 5 (or 6) and needs at least 3 drives. If you only have two drives, you would be better offer to have a scheduled rsync to sync the two drives together. With unionfs, you would never want your parity disk in the pool. So, if you…
  • ryecoaaron -

    Replied to the thread OMV 3.x Root login issue.

    Post
    Quote from Jieta25460: “Before do anything else are you sure there isn't anything else to do to create a root user ? ” The root user always exists. If you can't login as root via ssh, that is not because the root user does not exist. If you can't…