openmediavault

The open network attached storage solution

News

  • New

    Hey Guys,

    Newbie to OpenMediVault - well I want to be!!! Currently using FreeNAS 11 as a Home File Server and would like to convert to Open Media Vault for the same purpose...Last night, I loaded Open Media Vault with the four (4) WD 8TB Red Hard drives and followed a YouTube Tutorial for the install...Wiped Drives and went to the RAID configrator - but the WD Red Drives do not appear... I have worried with this and worried with this and ready to give up on the install...This morning I googled the issue and looks like drives larger than 2TB and looks like Linux will not recognize drives larger than 2 TB without being converted to GPT...So onward with the Battle and finally after spending this morning into trying to resolve this, decided to go back with the FreeNAS OS unless someone can steer me clear of this issue...Any assistance will be Greatly Appreciated!!! :) :) :)
  • New

    Hello everyone :)

    I am building an OMV NAS with a RAID 1 on 2 SATA disks in internal racks to be able to insert / eject in hotplug / hotswap (like this :i2.cdscdn.com/pdt2/6/5/2/1/700…e-interne-pour-disque.jpg).

    I would like to find a solution so that in case of breakdown I know which disk to replace. It's not so much for me as for non-computer people.

    The trouble is that on the web server the failure indicates that /dev/sdA is operational (so by deduction /dev/sdB is down) but does not say if it concerns rack 1 or rack 2.

    I have browsed a lot of posts on both OMV and mdadm without success (symlinks with udev, configuration of /etc/mdadm/mdadm.conf, etc.). Systematically the only device reassembled is /dev/sd?

    A solution that works ?

    Regards,
    lnj
  • New

    Hey Guys,

    I'm trying to integrate LDAP with OMV4. My scenario:
    As an authentication server I use Jump Cloud (jumpcloud.com)
    OMV is hosted on the Google cloud

    I installed the LDAP plugin in the OMV plugin repository and when I try to integrate I get the following message: Failed to execute command 'export PATH = / bin: / sbin: / usr / bin: / usr / sbin: / usr / local / bin: / usr / local / sbin; export LANG = C.UTF-8; systemctl start 'smbd' 2> & 1 'with exit code' 1 ': Job for smbd.service failed because the control process exited with error code. See "systemctl status smbd.service" and "journalctl -xe" for details.

    Detailed Log is in the attachment.
    It seems to me that for unknown reason, it can not add the server in LDAP, would it be because of the OU?

    Thanks
  • New

    Hi,
    since the Plex Media Server Plugin seems to be dead and i don't want to switch over to Docker with my Plex installation, i'm looking for a way to update my current Plex installation to the latest Version.

    What will be the best way to self maintain my PLex Installation without breaking anything?

    Would it be that easy, i only have to add the official Plex Repo to my OMV Installation, like described here: support.plex.tv/articles/23597…nux-server-distributions/

Unread Threads

Topic Replies Last Reply

Currently Using KVM? I need to avert global disaster!

7

TechnoDadLife

pobleme with docker

9

edraniin

physical disk properties Standby error

11

M0rpheus

How to pass a command to a container at startup, or get a program to auto-run in the container at startup?

4

ryecoaaron

Announcement Abandoned plugins

126

ryecoaaron

Recent Activities

  • TechnoDadLife -

    Replied to the thread OMV 4.x Currently Using KVM? I need to avert global disaster!.

    Post
    Yep, I just wanted to do it inside of omv. Doing it with Promox is cheating. ;(
  • edraniin -

    Replied to the thread pobleme with docker.

    Post
    It is ok I finally succeded to install nextcloud everthing are good thank you for your help
  • geaves -

    Replied to the thread pobleme with docker.

    Post
    You have installed the mysql plugin, that plugin as far as I can remember has a gui (a web frontend similar to omv) Then you are going to attempt to get nextcloud docker to communicate to mysql which is outside of docker, good luck with that!
  • M0rpheus -

    Replied to the thread OMV 4.x physical disk properties Standby error.

    Post
    Quote from Adoby: “After this, not using hdparm at all, ” Hello Adoby, thank you for your comment. What if I use a clean OMV without using hdparm. And immediately after mount the HDD, install or test OpenSeaChest / OpenSeaChest features. Accordingly,…
  • systemd doesn't exist in the docker. The only program that is run is apache. You should have cron technically running in its own container.
  • ryecoaaron -

    Replied to the thread Abandoned plugins.

    Post
    Quote from Niemand: “In Plex I have the info "a new version is available". But in the update window of OMV no Plex-update can be seen. How can I update it? ” If the plex repo is enabled and you have clicked Check in the Updates tab but still see no…
  • ryecoaaron -

    Replied to the thread OMV 4.x Docker no way to be found new Raspberry install.

    Post
    Quote from Nefertiti: “Same difference no confirmation or error message no docker plugin to be installed. ” I really wish RPis would go away... Try this as root: sed -i "/^.*stretch-backports.*$/d" /etc/apt/sources.list omv-changerepo 'Docker CE'
  • Qshtr -

    Liked reverendspam’s post in the thread My Closet Monster.

    Like (Post)
    My 4 year old system using OMV4, complete with dust bunnies. These are the prices I paid at the time I bought the products. I've noticed that processors have doubled / tripled in price since. $70 - MSI B150M Pro-vdh $56 - Pentium G440 CPU - 2 cores $48…
  • macom -

    Replied to the thread OMV 4.x Issues with WD 8TB Red HD.

    Post
    Even if you wiped the drives, there might be some signatures left on them. What is the output of wipefs -n /dev/sd? exchange ? according to your actual drives.
  • edraniin -

    Replied to the thread pobleme with docker.

    Post
    where do I have to change the localhost? Is it in docker ? or may be with shellinabox ?