openmediavault

The open network attached storage solution

News

  • New

    After my old QNap with OMV 3 overcome its lifecycle i am looking for a small installation for a backup system with one Harddisk, running OMV 4/5 and simply rsync'ing my home-nas providing the backup via nfs/cifs.

    I think I do not have high demands, looked for a Odroid HC2 while having a ironwolf 8TB Harddisk at hand. But in Germany it seems to be sold so I need alternatives ... what else Setup seems to be suiteable? Looked for RockPro64 but dont know if attaching Sata Drives Via USB3 is good / performant. Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ... What do I have to buy to run it 24/7 and where? Is there something else leke the HC2, while i like the dedicated straight design ...

    Micha
  • New

    hello,
    first, i hope everybody will understand my poor english ;)
    i found many thread speaking about modifying parameters in monit configuration, but i didn't found a thread about adding a new entry.
    I just want to monit with a network ping test if a device is connected or not on my network, and if not, send an alert.
    I thought it was exactly what monit does, that is why i want to add a service in monit. but i don't know which file adding/modifying to do this being sure that omv will not reset all i have done when reboot.
    thank you in advance for your help
  • New

    So I've got an OMV 3.x server that I made out of an old dell PE 840, with 4 2TB drives in the Dell SAS Raid enclosure. Over the weekend a VM that I have on it failed. When i checked it out found tons of 'medium errors' and 'unrecoverable read errors'. I assume it's 'bad blocks' so first and foremost, how do I run a 'scandisk' or something on this to recover what it can?

    Second would be, is there a way to get notified of errors like this? I think if I could have moved this before it got bad I wouldn't be in a pinch now so i figured I'd check for my other systems and future reference...

    Thanks!

Unread Threads

Topic Replies Last Reply

Odroid HC2 ... or something else ... RockPro64 ,,,

7

mipi

Pinned Call for testers: OMV4 for ARM boards

114

tkaiser

OMV 4 Zoneminder

4

peram

Trying to swap drives in RAID1 but RAID is missing

7

cghill

add monit entry

0

Recent Activities

  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Ps: As long the HC2 is not available
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Much to read ... ufff After all I am not so wrong with a RockPro64 with housing and internal SATA, even its lacking the SBC charme ... ;-)) (As i got diffrent proposals here ...) My approach ROCKPro64 4GB SingleBoard Computer ROCKPro64 30mm…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “is there a complaint about using intern SATA-Card instead an external USB-Cabeling? ” Nope. Internal SATA will be more reliable by design as already said (USB3-A receptacles are fragile crap in my opinion and at least I had no luck…
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from tkaiser: “For your use case the HC2 is still the best option (and should be back in stock in early 2019 if I understood Pollin.de correctly). ” Thank you for this clear message, but ... Pollin drove me crazy. On their Website the HC2…
  • happyreacer -

    Liked votdev’s post in the thread OMV 5.x (development) core Install OMV5 on Debian 10 (Buster).

    Like (Post)
    To install OMV5 on an already installed Debian 10 (Buster), simply execute the following steps: Source Code (11 lines)Shell-Script (15 lines)
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “I think i'll give RockPRO a chance, is it possible to install the System on the eMMC-Module? ” Sure. But this is as useless as using a RockPro64 for the job in the first place. It just costs a lot more money and wastes more energy…
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Switched over to the Pine64 Website .... they got a nice NAS-Case, Cabeling, AC-Supply, PCIe I think i'll give RockPRO a chance, is it possible to install the System on the eMMC-Module?
  • tkaiser -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    Quote from esbeeb: “I'm using SMB3.11, I got this by running the "smbstatus" command ” You do not get the SMB version/dialect this way since client and server negotiate this dynamically. But since you haven't changed settings at least you're not…
  • peram -

    Replied to the thread OMV 4.x OMV 4 Zoneminder.

    Post
    Quote from ryecoaaron: “Quote from peram: “does not work with the proposed docker for arm ... docker: koenkk / rpi-zoneminder ” What kind of system are you using? ” OMV4 on Odroid HC2 ... setting port 8080 but when I launch I am getting…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ” Of course as long as - you use a good USB to SATA bridge (JMS578 for example) - you don't run into cabling/contact issues (a very 'popular' problem…