openmediavault

The open network attached storage solution

News

  • New

    Hi everyone,

    Spectrum came by and replaced the router and modem meaning that the network is fresh.

    I re-burned the OMV software onto a MicroSD card. I have OMV 3.x running.

    My Android tablets detect the Windows shares without any major problems. However, neither of my two Windows machines can detect the Windows shares on OMV. This is getting quite frustrating because prior to the network hardware changes it was working on one of my Windows machines at least. I can still access things through FTP but that is not how I want to use my NAS setup.

    I have read lots of tutorials and other people's issues with the same issues. I tried enabling SMB 1.0 as well.

    Does anyone have a solution or suggestion?
  • New

    Hello,

    No idea what happened. None of my docker containers were running when I tried to connect to them only to notice that in OMV's dashboard docker is enabled but not running. Tried restarting the server but it's still dead. OMV throws a bunch of error codes at me if I click on docker.

    Tried to run some commands through SSH from what I found on google but I can't make heads or tails of what's going on. I noticed if I didn't run commands using sudo then nothing would happen and I'd have to close out and open a new SSH session. Even when using sudo it still jams up sometimes but seems less frequent.

    imgur.com/a/YWauoB4

    Is there a way I can simply just reinstall docker?

    Thank you for any help!
  • New

    Hello,

    I'm searching how to install OMV on the nanopc-T4.
    I found the official image in the download section

    OMV_4_NanoPC_T4.img.xz

    But I'm not sure how to install it.

    The nanopc forum refers to 3 methods :

    • Use EFlasher to make a bootable SD card and flash an image to eMMC with this card
    • Use a Windows' utility "AndroidTool_Release_v2.54" provided by Rockchip to flash an image to eMMC with a Type-C cable
    • Use a Linux utility Linux_Upgrade_Tool_1.27 provided by Rockchip to flash an image to eMMC with a Type-C cable
    But these tools are given with friendlyarm OSes, can we use them with the omv img :?:

    I'm on linux so I would like to try Linux_Upgrade_Tool_1.27, but the first command doesn't work
    > sudo cp upgrade_tool /usr/local/sbin
    > cp: cannot create regular file '/usr/local/sbin': No such file or directory

    I prefer to ask before breaking something

    I tried to etcher the omv img on an sd card but it didn't boot on the nanopc, nothing displays on HDMI screen.

Unread Threads

Topic Replies Last Reply

My docker died

1

syrusstk

Letsencrypt problem

15

antipiot

Docker Won't Start

4

mattlim9427

New Router & Modem, now Windows 10 can not detect shares, Pi NAS

0

Installation on NanoPC T4

3

tkaiser

Recent Activities

  • syrusstk -

    Replied to the thread OMV 4.x My docker died.

    Post
    Saw something on github: github.com/docker/compose/issues/4486 maybe try the resolve of the last comment Quote from agarwal13: “Currently, am using the docker-compose command with setting large timeouts (10mins) and it is working for me. Below…
  • antipiot -

    Replied to the thread OMV 4.x Letsencrypt problem.

    Post
    Quote from Pentothal: “thank you, I'm learning so many things, we hope to remember them for the futureI would like to change the ports but I am afraid to work on it the Nextcloud container in the docker assigns port 433 by default, it is not possible…
  • mattlim9427 -

    Replied to the thread OMV 3.x Resolved Docker Won't Start.

    Post
    I encountered this too. Then I ssh to my OMV and check the docker status. Turned out it wasn't running. Source Code (40 lines) Then I start the docker and it's working: Source Code (26 lines)Hope it helps!
  • chrisfoose -

    Posted the thread OMV 3.x New Router & Modem, now Windows 10 can not detect shares, Pi NAS.

    Thread
    Hi everyone, Spectrum came by and replaced the router and modem meaning that the network is fresh. I re-burned the OMV software onto a MicroSD card. I have OMV 3.x running. My Android tablets detect the Windows shares without any major problems. …
  • tkaiser -

    Replied to the thread OMV 4.x Installation on NanoPC T4.

    Post
    Quote from extnction: “I have to use Ethernet cable and then find it's IP and do the nand-sata-install from web interface or ssh ” Exactly but these days there shouldn't be a need to 'find it's IP' since usually those Internet access routers…
  • Gandalf1203 -

    Replied to the thread OMV 4.x Update Upgrade error : openmediavault (4.1.13-1).

    Post
    same same with 4.1.15-1
  • KM0201 -

    Replied to the thread OMV 4.x Read floppies directly from OMV.

    Post
    I get what you're trying to do, and I know it's not what you asked... but this makes absolutely zero sense to me. A 16gig flash drive (which can be had cheap).. is the equivalent of over 11k floppy disks. Wouldn't it make more sense to move your data…
  • KM0201 -

    Replied to the thread OMV 4.x How to backup and restore OMV configuration ? BMR Plan - howto?.

    Post
    Quote from akurzawa: “OMG is this a joke? This is the failure of this system. Wow I didn't expected that - I've working on numerous file system appliances, but I can't remember that any of them would not have ability to save and restore config. I was…
  • extnction -

    Replied to the thread OMV 4.x Installation on NanoPC T4.

    Post
    > Write image in a single step using Etcher etcher.io to SD card. The image can be transferred in a second step to permanently attached eMMC, USB or SATA storage using included nand-sata-install tool. I burned that image with etcher on the sd card, but…
  • tkaiser -

    Replied to the thread OMV 4.x Installation on NanoPC T4.

    Post
    Quote from extnction: “I found the official image in the download section ” So why not simply following the readme there and burn the image with Etcher (confirmed to work -- I have no idea whether anything will be displayed on a connected display since I…