openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

Unread Threads

Topic Replies Last Reply

Pinned Call for testers: OMV4 for ARM boards

86

nghiacc

No Ethernet card was detected. Installation

1

Dragonheart100

Is ZFS supported in Kernel 4.13-4.15?

288

ellnic

I cant get to web gui

0

Sharing folders/files over internet

2

tkaiser

Recent Activities

  • nghiacc -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    Hi - I tried to install the image for HC1, it works fine for the webadmin, however could not login using SSH. Error from the log: [CRON26969]: Authentication token is no longer valid; new one required. Searching through the internet, the error appears to…
  • Dragonheart100 -

    Replied to the thread No Ethernet card was detected. Installation.

    Post
    I have installed a WLan card and Debian finds the driver at the installation. So it is a driver problem! How can I install the I219V driver at or after the installation? And should I install OMV or Debian then?
  • ellnic -

    Replied to the thread OMV 4.x Resolved Upgrade 3.x -> 4.x Is ZFS supported in Kernel 4.13-4.15?.

    Post
    @ArmandH is contrib in your sources? :) Actually, that error also looks like your backports isn’t enabled... but it must be if you have the 4.17 kernel. Can you post your sources please? Don’t forget the OMV ones too.
  • Share Buddy -

    Posted the thread OMV 4.x I cant get to web gui.

    Thread
    Hi I have omv on a sbc runing plex plugin, Wenever I put in ip I get too long to load page. all my divices(Roku/plex, windows 7) can see the nas/shear folders exsept for windows 10 now. I have had omv runing for over a mounth. Do I have to reinstal…
  • tkaiser -

    Replied to the thread OMV 4.x Sharing folders/files over internet.

    Post
    Quote from Frepke: “Now I like to share some files with a friend, is there a safe easy way to accomplish that? ” I would allow access through VPN and use exactly the same filesharing daemon you already use. If it's Samba then use Samba for remote…
  • aykaydub -

    Replied to the thread OMV 4.x Plex Docker Container is routed through OpenVPN from Transmission-OpenVPN Container.

    Post
    Thanks for this, its a problem I have been struggling with for a while. The problem now is I can't open the webui now. I have tried following the LOCAL_NETWORK instructions on the docker guide to the best of my abilities, but still can't get it to work.
  • flmaxey -

    Replied to the thread OMV 4.x Help with Easy Backup solution.

    Post
    Quote from ryecoaaron: “I am done here. No new plugin will be written and the rsnapshot won't be changed. So, everything should not explode. ” Yeah, I'm worn out too. I'll continue with the Rsync workaround, and come up with a better process, in…
  • ArmandH -

    Replied to the thread OMV 4.x Upgrade 3.x -> 4.x Huges troubles after updating from omv3 to 4.

    Post
    the files or database you have on a RAID or ZFS has nothing to do with the OMV install, you can reinstall and mount again your data disks. If for example you have stored your config files from docker etc on the RAID you can install the image and point to…
  • TheLostSwede -

    Replied to the thread OMV 4.x Sharing folders/files over internet.

    Post
    The easiest way I can think of is to make a user account for him/her and then give him access via your VPN. Another potential option would be to use Emby, as that can be accessed via your external IP address, but it would require that you get the paid…
  • flmaxey -

    Replied to the thread OMV 4.x Help with Easy Backup solution.

    Post
    Quote from henfri: “So, the CLI is the only problem about the restore? ” For beginners? Absolutely. While it might be hard to for you to imagine, we'll say you know nothing about backup strategy. But, you're told backup is a good idea and it's no…