openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    I have installed successfully before on a VM so I finally decided bare metal server was a go.

    The openmediavault boot menu looks fine, no issues, I select install and then I get this garbled screen. I've tried both DVI and VGA outputs.
    I tried to blindly enter my way through the garbled screens using the installation guide screenshots but eventually I got a very red looking garbled screen so I guess the install completely failed.

    Any ideas?
    It's a Ryzen 3, motherboard is asrock ab350 pro4, and only the SSD is connected. Using iso on a usb downloaded today version 4.1.3 amd64
  • New

    Hello,
    I desperately need a Remote Desktop in OMV OpenMediaVault.
    Installed> OMV-Extras> Plugins> openmediavault-remotedesktop 4.0.1
    Connected via Windows Remote Desktop Connection.
    After a few clicks, no reaction, connection reboot few clicks and again lags / errors.

    Source Code

    1. root@RockHomeServer:~# uname -a
    2. Linux RockHomeServer 4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee #1 SMP Thu Aug 9 20:29:55 UTC 2018 aarch64 GNU/Linux

    [IMG:http://funkyimg.com/i/2Pcg4.jpg] [IMG:http://funkyimg.com/i/2PchY.jpg]

    Remote Desktop is very important to me.
    Please help.
  • New

    I'm wondering if anyone can help me. I've just tried upgrading from v3 to v4, using the guides I found on here: apt-get update, apt-get upgrade, omv-release-upgrade

    But now I can't get into the GUI. I'm not that familiar with Linux so I'm not sure where to start troubleshooting. Here is the last part of the log from the omv-release-upgrade:

    Source Code

    1. Configuration file '/etc/ntp.conf'
    2. ==> Modified (by you or by a script) since installation.
    3. ==> Package distributor has shipped an updated version.
    4. ==> Keeping old config file as default.
    5. Setting up libnghttp2-14:amd64 (1.18.1-1) ...
    6. Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-1+b1) ...
    7. Setting up libssh2-1:amd64 (1.7.0-1) ...
    8. Setting up libcurl3-gnutls:amd64 (7.52.1-5+deb9u8) ...
  • New

    To preface things, I did a bunch of omv-release-upgrades to get from 2.x to 4.x. I ended up sorting through a LOT of problems, but I think all of my errors are resolved as far as that goes.

    I have a Mellanox ConnectX on both my OMV box and my Windows 10 box, connecting to a Unifi 10gbps port. Both OS's show that they're connected at 10gbps, however all testing is showing that the throughput on the linux box is only operating at 1gbps. iperf, smb, nfs, etc. all capping out at about 112MB/s or 1gbps. Ethtool is showing the links peed at 10000Mb/s. Is there some sort of configuration I need to check that would force the interface to be limited to 1gbps throughput?

Unread Threads

Topic Replies Last Reply

OMV not working after upgrade 3>4

3

pangit99

Now ready for OS drive choice; M2 - - overkill?

42

Kai

pci-e sata ata card

1

KM0201

Unofficial OMV Theme Changer tool, css themes and UI manipulation

42

syrusstk

OMV-Remote Desktop-lag-disorder

12

ryecoaaron

Recent Activities

  • pangit99 -

    Replied to the thread OMV 4.x Upgrade 3.x -> 4.x OMV not working after upgrade 3>4.

    Post
    I checked and I thought they were. How do I remove them now? Is there a way of doing it from the command line?
  • Kai -

    Replied to the thread Now ready for OS drive choice; M2 - - overkill?.

    Post
    FINALLY!!! All parts are on order and should be here between 12/20 and 12/24/2018 . . . including the 2 each 16gb Samsung drives suggested by gderf plus other advised components from the forum. Gettin' excited now! Thanks everyone. You're all my buddies…
  • KM0201 -

    Replied to the thread OMV 4.x pci-e sata ata card.

    Post
    While I can't recommend one specifically, LSI usually has a pretty solid reputation for Linux support (they can also get pretty pricey)
  • syrusstk -

    Replied to the thread OMV 4.x Unofficial OMV Theme Changer tool, css themes and UI manipulation.

    Post
    Quote from macom: “Would be nice to be able to switch for each theme between "condensed" and "normal". ” Not sure what condensed mean to be honest, there is an option that removes the header altogether, probably you are referring to something else…
  • Kai -

    Liked KM0201’s post in the thread Now ready for OS drive choice; M2 - - overkill?.

    Like (Post)
    Quote from Kai: “Quote from KM0201: “Quote from Kai: “Also forum, I hate to throw this into the mix but it came to my mind last night. What if I wanted to get acquainted with Linux - could I install the Linux OS also and have it running with OMV4?…
  • KM0201 -

    Replied to the thread Now ready for OS drive choice; M2 - - overkill?.

    Post
    Quote from Kai: “Quote from KM0201: “Quote from Kai: “Also forum, I hate to throw this into the mix but it came to my mind last night. What if I wanted to get acquainted with Linux - could I install the Linux OS also and have it running with OMV4?…
  • ryecoaaron -

    Replied to the thread OMV 4.x OMV-Remote Desktop-lag-disorder.

    Post
    Quote from M0rpheus: “Just like here now ” That is a browser cache issue. Quote from M0rpheus: “What about the openssh server, what's the best way to choose it? ” Pick the default option.
  • M0rpheus -

    Liked ryecoaaron’s post in the thread OMV 4.x OMV-Remote Desktop-lag-disorder.

    Like (Post)
    Quote from M0rpheus: “maybe I installed something wrong or did something wrong / forgotten? ” First of all, use this image as it already has OMV installed - github.com/ayufan-rock64/linux…-0.7.11-1075-armhf.img.xz Then update the system from the updates…
  • M0rpheus -

    Replied to the thread OMV 4.x OMV-Remote Desktop-lag-disorder.

    Post
    Quote from ryecoaaron: “Then update the system from the updates tab. Then install the remotedesktop plugin from the plugins tab. ” Thank you for your prompt reply Otherwise, everything must be right as I do!?! It has always been like this, when I search…
  • Kai -

    Replied to the thread Now ready for OS drive choice; M2 - - overkill?.

    Post
    Quote from KM0201: “Quote from Kai: “Also forum, I hate to throw this into the mix but it came to my mind last night. What if I wanted to get acquainted with Linux - could I install the Linux OS also and have it running with OMV4? Would the Linux OS…