openmediavault

The open network attached storage solution

News

  • New

    After my old QNap with OMV 3 overcome its lifecycle i am looking for a small installation for a backup system with one Harddisk, running OMV 4/5 and simply rsync'ing my home-nas providing the backup via nfs/cifs.

    I think I do not have high demands, looked for a Odroid HC2 while having a ironwolf 8TB Harddisk at hand. But in Germany it seems to be sold so I need alternatives ... what else Setup seems to be suiteable? Looked for RockPro64 but dont know if attaching Sata Drives Via USB3 is good / performant. Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ... What do I have to buy to run it 24/7 and where? Is there something else leke the HC2, while i like the dedicated straight design ...

    Micha
  • New

    hello,
    first, i hope everybody will understand my poor english ;)
    i found many thread speaking about modifying parameters in monit configuration, but i didn't found a thread about adding a new entry.
    I just want to monit with a network ping test if a device is connected or not on my network, and if not, send an alert.
    I thought it was exactly what monit does, that is why i want to add a service in monit. but i don't know which file adding/modifying to do this being sure that omv will not reset all i have done when reboot.
    thank you in advance for your help
  • New

    So I've got an OMV 3.x server that I made out of an old dell PE 840, with 4 2TB drives in the Dell SAS Raid enclosure. Over the weekend a VM that I have on it failed. When i checked it out found tons of 'medium errors' and 'unrecoverable read errors'. I assume it's 'bad blocks' so first and foremost, how do I run a 'scandisk' or something on this to recover what it can?

    Second would be, is there a way to get notified of errors like this? I think if I could have moved this before it got bad I wouldn't be in a pinch now so i figured I'd check for my other systems and future reference...

    Thanks!

Unread Threads

Topic Replies Last Reply

Odroid HC2 ... or something else ... RockPro64 ,,,

0

add monit entry

0

Pinned Call for testers: OMV4 for ARM boards

113

esbeeb

Virtualbox VNC Issue

7

marcsgirall

Downloads not working for torrents

1

gderf

Recent Activities

  • youtu.be/arrHdrbKaEk Today, we will install Tautulli using docker to monitor our Plex watchinghabits. You need to have Plex installed to use this. Here is a video on how to do that: Plex Video For Raspberry Pi use this docker: lsioarmhf/tautulli
  • youtu.be/jS4oiJcrrR4 Today, we install Heimdall which creates a simple dashboard to organize and provide ready access to our docker apps and server.
  • mipi -

    Posted the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Thread
    After my old QNap with OMV 3 overcome its lifecycle i am looking for a small installation for a backup system with one Harddisk, running OMV 4/5 and simply rsync'ing my home-nas providing the backup via nfs/cifs. I think I do not have high demands,…
  • neeqkowlah -

    Posted the thread OMV 3.x add monit entry.

    Thread
    hello, first, i hope everybody will understand my poor english ;) i found many thread speaking about modifying parameters in monit configuration, but i didn't found a thread about adding a new entry. I just want to monit with a network ping test if a…
  • esbeeb -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    Quote from tkaiser: “~35MB/s ” Yes, that's that fastest I've ever been able to get, on average (as in, I always purposely outrun the disk buffers because I upload/download 2GB worth of files as a test), when downloading over FTP (37 MB/sec,…
  • esbeeb -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    I'm just using the standard SMB support which OMV 4 offers, without hacking the default SMB settings. Is that SMB1, SMB2, or SMB3? Samba supports up to SMB3, apparently. Perhaps I too hastily assumed that I was using SMB1, believing it to be the
  • marcsgirall -

    Replied to the thread OMV 4.x Virtualbox VNC Issue.

    Post
    So I’ve been trying to find the ConsoleImpl.cpp file to patch & I can’t for the life of me find it in the plugin version of VBox.
  • gderf -

    Replied to the thread Downloads not working for torrents.

    Post
    In Deluge you can use the Test Active port tool found in Preferences | Network. You must have working forwarded ports that are accessible from the outside internet or downloads will not work. In the docker, Host mode networking would be a better choice.
  • Agricola -

    Replied to the thread OMV 3.x NextCloud Installation Q & A.

    Post
    Well, I guess I did have my ports forwarded properly: forum.openmediavault.org/index…f2edd19c496120e2d7ff111bc The new Letsencrypt video tutorial worked flawlessly. Thanks @TechnoDadLife. Now to get Nextcloud folded in.
  • ryecoaaron -

    Replied to the thread OMV 4.x Duplicati plugin Suggestion.

    Post
    While I agree it probably could use some improvement, I don't plan on porting it to OMV 5.x in favor of using docker. The plugin isn't much more than an enable button anyway. So, you could start using the docker now and get the customization you want. …