openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

Unread Threads

Topic Replies Last Reply

RAID 5 Lost, Not sure what to do.

8

itstheburns

digoo eye or IP Camer

1

Tomstone

Cannot access web gui on new OMV_4_Raspberry_Pi_2_3_3Plus.i​mg install

21

Nefertiti

Announcement Installation and Setup Videos - Beginning, Intermediate and Advanced

52

TechnoDadLife

Hardware Failure?

0

Recent Activities

  • itstheburns -

    Replied to the thread RAID 5 Lost, Not sure what to do..

    Post
    I have to keep running sudo mdadm --manage /dev/md127 --run every time the system reboots. It does start up after running the command but not sure what to do in order to automate it.
  • Tomstone -

    Replied to the thread OMV 4.x digoo eye or IP Camer.

    Post
    Looks like my friend "Techno Dad Life" have just uploaded an video. Build Your Own Surveillance System with MotionEye and Openmediavault Nice work happy that you add this it's all I need to get started. One thing can we move the camera round to…
  • youtu.be/2piou0nFrRY Today, we set up Motion Eye Surveillance docker on our Openmediavault server. Motion Eye was originally designed for the Raspberry Pi. There are dedicated images for that. This is to install it in a docker on a x86 machine.
  • itstheburns -

    Replied to the thread RAID 5 Lost, Not sure what to do..

    Post
    I did some more searching and ran this: sudo mdadm --manage /dev/md127 --run This fixed it. Seems like such a simple command had the system down. I was able to mount it and its showing up as normal. I just have to create my shares again. Thanks for…
  • Nefertiti -

    Replied to the thread Cannot access web gui on new OMV_4_Raspberry_Pi_2_3_3Plus.img install.

    Post
    Quote from ryecoaaron: “Quote from Nefertiti: “My wireless usb logitech is not detected and tru puty PW not good ” You will have to get a different usb keyboard unless you have a different linux system that you can mount the sd card and edit…
  • itstheburns -

    Replied to the thread RAID 5 Lost, Not sure what to do..

    Post
    No, I've never used the onboard raid controller. This onboard controller only has RAID 0, 1, 10. I had it setup using RAID 5 and xfs file system inside omv. Whether the SATA controller is set to raid or ahci, its the same results
  • TechnoDadLife -

    Replied to the thread Installation and Setup Videos - Beginning, Intermediate and Advanced.

    Post
    youtu.be/2piou0nFrRY Today, we set up Motion Eye Surveillance docker on our Openmediavault server. Motion Eye was originally designed for the Raspberry Pi. There are dedicated images for that. This is to install it in a docker on a x86 machine.
  • keribi560 -

    Posted the thread OMV 2.x Hardware Failure?.

    Thread
    I am having hardware issues. Twice my OMV server has shutdown with the fans running full blast (everything else dead) I think it is most likely a power supply or MB failure. This has happened twice so far and after I reboot the server all is fine and…
  • ryecoaaron -

    Replied to the thread Cannot access web gui on new OMV_4_Raspberry_Pi_2_3_3Plus.img install.

    Post
    Quote from Nefertiti: “My wireless usb logitech is not detected and tru puty PW not good ” You will have to get a different usb keyboard unless you have a different linux system that you can mount the sd card and edit /etc/ssh/sshd_config to permit…
  • ryecoaaron -

    Replied to the thread RAID 5 Lost, Not sure what to do..

    Post
    Now I see the problem. You created the array using the shitty onboard motherboard raid (external:imsm tells me that) . I didn't notice that in the first post. I have no idea how to fix it safely. I assume you setup the array in your bios the first…