openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    Hi there,

    Quick question regarding my planned over haul of my server.

    I started running OMV aver 4 years ago and set up my first RAID. The project went smooth and the OS running ever since with no issues. I decided it was time to look in to updating to a newer version of OMV. I would like to know what considerations I need to make with regards to my RAID drives and data on them when doing this update. Can i simply pull the data drives out, install the new OS, configure it then reinstall the drives and have OMV see them as they do now?

    I know my way around a computer enough to get in and (sometimes) out of trouble but having only dealt with RAID this one time was curious on the process.

    Thanks in advance

    Brad
  • New

    Hallo erstmal.

    ich habe lange Zeit OMV (nachinstalliert)auf einer Debian-Distro verwendet und hatte nie Probleme.
    Heute musste ich dieses System leider löschen und neu installieren.

    Bis hier hin habe ich alles genau so gemacht wie immer und OMV installiert (nach Anleitung).

    Hier meine Probleme:
    ich kann den Webserver nicht mehr per Hostname erreichen. Selbst auf dem Linux-PC selber kann ich nas/ (mein Port) nicht aufrufen. Anpingen ja, aufrufen nicht. Die IP ist von intern sowie extern (anderer PC im LAN) kein Problem.


    Außerdem sind folgende Listen leer und ich glaube die waren vorher nicht leer:
    System > Netzwerk > Schnittstellen
    und
    System > Netzwerk > Firewall.


    Gibt es irgendeinen Befehl, um OMV komplett auf Standard zurückzusetzen?

    Ich möchte nicht schon wieder formatieren. Das wäre das 3. mal heute.
  • New

    Hi!

    Over time I've built my x86 homemade NAS with openmediavault 4, and I've reached a pretty good overall state with that!

    I usually download and transfer a lot of files on that, especially over my several external Hard drives. I mounted my shares through SMB, and is everything working pretty well (copy and pasting files is fast and reliable)

    And here is where it come my issues: when I plug in my USB memories peripherals, I have to mount them manually through the OMV webinterface, then I have to move the files manually through shell to the external hard disk (that obviously can't be put on a 'Shared folder' through the OMV interface).

    This is pretty horrible, and is getting me very pissed every time I have to copy an serious amount of files in and out my NAS. Is basically my only flaws against a fantastic project I (or I shall say we?) made.

    I've searched on the forum for advices, but I've only found an useful thread that talk about a 'usbmount package', but I can't find it on…

Unread Threads

Topic Replies Last Reply

Unable to install remotedesktop because newer xrdp require

3

ryecoaaron

413 request entity too large nginx

1

ryecoaaron

Plex not transcoding. Docker.

24

flvinny521

Bazarr on Docker: Path to TV Shows is invalid

2

Denne

Plex Docker Container is routed through OpenVPN from Transmission-OpenVPN Container

2

oldsweatyman

Recent Activities

  • ryecoaaron -

    Replied to the thread OMV 4.x Unable to install remotedesktop because newer xrdp require.

    Post
    Quote from peter007: “I tried to activate the backports at omv-extras. But that returns an error. Installation is still not possible. ” If activating backports returns an error, it makes sense that installation wouldn't work. But, to help, posting…
  • ryecoaaron -

    Replied to the thread OMV 4.x 413 request entity too large nginx.

    Post
    You can't upload non-plugins via the web interface. So, you should download it with wget or transfer it to your system using winscp or something.
  • flvinny521 -

    Liked Denne’s post in the thread OMV 3.x Bazarr on Docker: Path to TV Shows is invalid.

    Like (Post)
    I found the solution to my problem: I had to use path mappings in the Bazarr settings. So the Docker settings were/are fine.
  • flvinny521 -

    Replied to the thread Plex not transcoding. Docker..

    Post
    Quote from exclusive213: “My PLEX stopped working again =( ” As predicted! Quote from flvinny521: “Just a heads up that any changes made to fstab that fall between the [openmediavault] tags will get reset by the OS on certain events. I had this…
  • Denne -

    Replied to the thread OMV 3.x Bazarr on Docker: Path to TV Shows is invalid.

    Post
    I found the solution to my problem: I had to use path mappings in the Bazarr settings. So the Docker settings were/are fine.
  • saran -

    Posted the thread OMV 4.x 413 request entity too large nginx.

    Thread
    "413 request entity too large nginx " while try to upload "dcm4chee-mysql-2.18.0.deb" how to slove this issue?
  • I figured it out. You just have to set the TransmissionOpenVPN container on bridged mode. I use my server's IP for the Host IP, select 9091 for the host port, 9091/tcp for the exposed port, and add. Problem solved.
  • exclusive213 -

    Replied to the thread Plex not transcoding. Docker..

    Post
    My PLEX stopped working again =( I took some steps to try and solve them myself. I copied /config /transcode directories from sharedfolders mount to the root of the drive where the OS is installed root@openmediavault:~# ls -al / total…
  • TechnoDadLife -

    Replied to the thread Installation and Setup Videos - Beginning, Intermediate and Advanced.

    Post
    youtu.be/N1BMV0Nu2rU Today, we will start exploring the gaming capabilities of Openmediavault. We will set up a simple Minetest on our server for a lan party.
  • Mr.Grape -

    Replied to the thread OMV 4.x New SSD.

    Post
    Quote from MvL: “Hi, I have nicely running Openmediavault, and I'm very pleased. I now want to move this install to a new SSD before I move this server to a DC. What is the best way to do this? Has Openmediavault some tools I'm not aware of? ” If I…