openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    So I had an asymmetrical Raid1 as a basic file server. One drive was .5Tb and the other was 2Tb. I just replaced the .5 with another 2Tb, and I'm trying to resize the filesystem to match the new size.

    My issue is functionally identical to the one in this thread, so I followed the same instructions, ie forcing mdadm to resync to the max capacity. However now that it's completed, the webclient still is showing the former size, and the thread essentially stops after running this command. What do I need to do to get it the right size? My guess was to ssh into the system and run parted, but I figured there's a better way to do this.

    EDIT: After looking around on the forum, it looks like doing a Raid1 was a bad idea from the get-go (or at least should have been migrated at some point over the past couple of years). Since I have the old drive and no new data had been added, could I create a btrfs pool with the 2Tb drives, plug the old drive into my desktop, and copy everything over?
  • New

    I went from OMV3 to 4 and i now i cant mount my old XFS drive from the Web Gui could it be done manually? and how?
    its the sdc1 disk, sdb1 is ext4 and works fine in the web gui.

    Source Code

    1. lsblk -a
    2. NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    3. sda 8:0 0 8G 0 disk
    4. ├─sda1 8:1 0 7,5G 0 part /
    5. ├─sda2 8:2 0 1K 0 part
    6. └─sda5 8:5 0 510M 0 part [SWAP]
    7. sdb 8:16 0 2,7T 0 disk
    8. └─sdb1 8:17 0 2,7T 0 part
    9. sdc 8:32 0 3,7T 0 disk
    10. └─sdc1 8:33 0 3,7T 0 part
    11. sr0 11:0 1 466M 0 rom
    Display All
  • New

    I have followed the omv extra guide to install plex via the repo in omv extra, omv extra installed is openmediavault-omvextrasorg_latest_all4.deb, however when I enable the plex repo the page does not apply the settings. Checking in the plugins results in no plexmediaserver plugin being found.

    It was suggested to use docker instead, but the same issue happens when trying to install the docker plugin via the Docker CE repo.

    It was suggested that this could be related to a DNS issue, however I am able to ping google.com.

    When running apt-get update i get the following output there are a lot of Ign:

    Towards the end of this output there it seems that some server certificate fails: -

    E: Failed to fetch https://dl.bintray.com/openmediavault-plugin-developers/arrakis-docker/dists/stretch/main/binary-amd64/Packagesserver certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

    Any help would be appreciated on this issue.
  • New

    Apologies if this is has been answered in another thread, I haven't found anything after searching.

    Some of my Sonarr and Radarr settings change by themselves regularly.
    For example:
    - in Sonarr, on the landing page, I want the view settings to be set to "Posters", but it defaults back to "Overview List" after a while
    - in Radarr, on the landing page, I want the page size to be "250" (Settings>UI), but it defaults back to "10" (the "10" option is not even available in Settings>UI...) after a while

    How do I ensure the changed settings stick?
    Is this happening to other users?
    Thank you for your help!

Unread Threads

Topic Replies Last Reply

Cant mount XFS

18

ryecoaaron

Increasing Raid1 filesystem size

9

ryecoaaron

I can not install omv on a 16gb ssd disk

3

ryecoaaron

Shared HDD suddenly goes missing

4

flmaxey

OMV extra - plexmediaserver plugin not found

2

ryecoaaron

Recent Activities

  • ryecoaaron -

    Replied to the thread OMV 4.x Resolved Cant mount XFS.

    Post
    Quote from valar morghulis: “But i dont get why there were so many entrys the OMV wipefs only showed 1 entry thats why they "regenerated" after delete ” OMV is using util-linux 2.29 which is much older. I would guess deleting each one in OMV would…
  • ryecoaaron -

    Replied to the thread OMV 3.x Increasing Raid1 filesystem size.

    Post
    yep
  • valar morghulis -

    Liked ryecoaaron’s post in the thread OMV 4.x Resolved Cant mount XFS.

    Like (Post)
    Quote from valar morghulis: “command not found it says but i guess i never had that drive in zfs format ” Strange that there is a zfs signature on it then. Not sure why it keeps coming back either. I can't replicate any of this on my test VM.
  • valar morghulis -

    Liked ananas’s post in the thread OMV 4.x Resolved Cant mount XFS.

    Like (Post)
    I had a similar issue after upgrading from 3.x to 4.x. Issue was a ZFS signature on my 4 disks. Looks like the newer tools are a little bit more sensitive. Use "wipefs" (be very carefully) to remove the other signatures from the disk. I had to download…
  • trey.merkley -

    Replied to the thread OMV 3.x Increasing Raid1 filesystem size.

    Post
    Would it just be cryptsetup resize /Dev/md0?
  • valar morghulis -

    Replied to the thread OMV 4.x Resolved Cant mount XFS.

    Post
    Should i try to delete every zfs_member number?? UInsggQ.png Edit: Removed all now its Working thx!!! But i dont get why there were so many entrys the OMV wipefs only showed 1 entry thats why they "regenerated" after delete
  • ryecoaaron -

    Replied to the thread OMV 3.x Increasing Raid1 filesystem size.

    Post
    I should have noticed you were working with a devicemapper device and that is was either encrypted or using LVM. You have resized the array and device but now need to resize the luks container with cryptsetup resize. Then you can resize the filesystem.
  • ryecoaaron -

    Replied to the thread OMV 4.x I can not install omv on a 16gb ssd disk.

    Post
    This isn't causing the issue but I don't see the bootable flag set on your root partition. I don't see any reason why it wouldn't be writeable but I would boot systemrescuecd and wipe the ssd with: wipefs -a /dev/sda dd if=/dev/zero of=/dev/sda bs=1M
  • valar morghulis -

    Replied to the thread OMV 4.x Resolved Cant mount XFS.

    Post
    i boot into system rescue cd and try it there.
  • ryecoaaron -

    Replied to the thread OMV 4.x Resolved Cant mount XFS.

    Post
    Quote from valar morghulis: “command not found it says but i guess i never had that drive in zfs format ” Strange that there is a zfs signature on it then. Not sure why it keeps coming back either. I can't replicate any of this on my test VM.