openmediavault

The open network attached storage solution

News

  • New

    Hi,

    Sorry if this is a noob question since I'm new to Unix based systems. But uhh is there a way I can directly read and write floppy disks via my fileserver? The motherboard of my fileserver is soon the only motherboard that has a actual floppy connector and where I work we still have some super expansive machines that write their data on floppy disks.

    So is there a way I can mount my floppy disk like I can mount a USB hard drive or do I really need to mess with Docker or Virtualbox just to read and write a floppy disk?

    And before someone asks, a USB FDD is not a option. Too unreliable and I already have 2 that don't work properly/reliably.
  • New

    After my old QNap with OMV 3 overcome its lifecycle i am looking for a small installation for a backup system with one Harddisk, running OMV 4/5 and simply rsync'ing my home-nas providing the backup via nfs/cifs.

    I think I do not have high demands, looked for a Odroid HC2 while having a ironwolf 8TB Harddisk at hand. But in Germany it seems to be sold so I need alternatives ... what else Setup seems to be suiteable? Looked for RockPro64 but dont know if attaching Sata Drives Via USB3 is good / performant. Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ... What do I have to buy to run it 24/7 and where? Is there something else leke the HC2, while i like the dedicated straight design ...

    Micha
  • New

    hello,
    first, i hope everybody will understand my poor english ;)
    i found many thread speaking about modifying parameters in monit configuration, but i didn't found a thread about adding a new entry.
    I just want to monit with a network ping test if a device is connected or not on my network, and if not, send an alert.
    I thought it was exactly what monit does, that is why i want to add a service in monit. but i don't know which file adding/modifying to do this being sure that omv will not reset all i have done when reboot.
    thank you in advance for your help
  • New

    Hello,

    I've recently configured sonarr, radarr, jackett, and deluge. I followed Technodad's youtube videos. It took me a little while but I finally got sonarr and radarr working properly and they send everything over to deluge to download. The issue is that deluge isn't actually downloading anything. I used to to have an "error" message which I seem to have fixed by changing the download directory (hopefully it's correct now). Now the word "error" has been replaced with "downloading" but still nothing happens.
    I configured qbittorrent and I'm getting the same issue. I don't know if the problem might be related to my router but torrent downloading works perfectly fine on my windows machine.

    Here is a screenshot of what qbittorrent looks like.
    imgur.com/a/2Yvidf7

    Can't seem to find anything on google and the few guides regarding using torrent clients for OMV don't ever mentioning configuring any of this crap which leads me to believe it should normally just work out of the box?

    I…

Unread Threads

Topic Replies Last Reply

The Class E Network

504

ryecoaaron

Virtualbox VNC Issue

8

ryecoaaron

Read floppies directly from OMV

1

ryecoaaron

Updated 3->4 and now POSTFIX ERRORS

3

jmccusker

Pinned Windows 10 Creators failure to locate CIFS/SMB shares

40

geaves

Recent Activities

  • ryecoaaron -

    Replied to the thread The Class E Network.

    Post
    Quote from flmaxey: “Well that didn't work out very well. While going through the script process..... ” Volker's OMV5 instructions will probably have to change since you can't add a repo without a key (unless you put trusted in the repo line but…
  • ryecoaaron -

    Replied to the thread OMV 4.x Virtualbox VNC Issue.

    Post
    Quote from marcsgirall: “So I’ve been trying to find the ConsoleImpl.cpp file to patch & I can’t for the life of me find it in the plugin version of VBox. ” As I posted in the other thread about this, I built the packages and put them here -
  • ryecoaaron -

    Replied to the thread OMV 4.x Read floppies directly from OMV.

    Post
    Quote from Rickboy333: “But uhh is there a way I can directly read and write floppy disks via my fileserver?” Sure but not via the OMV web interface. You would do it just like any other Linux box. Assuming the disk was formatted on Windows and one…
  • jmccusker -

    Replied to the thread Updated 3->4 and now POSTFIX ERRORS.

    Post
    Think I might have fixed it. After running commands shown above I ran... Source Code (2 lines)Which returned a message about file master.cf. Nothing now in the log after login.
  • jmccusker -

    Replied to the thread Updated 3->4 and now POSTFIX ERRORS.

    Post
    Thanks for the help. Now showing this, which is what it did before my fiddling. Source Code (8 lines)
  • Rickboy333 -

    Posted the thread OMV 4.x Read floppies directly from OMV.

    Thread
    Hi, Sorry if this is a noob question since I'm new to Unix based systems. But uhh is there a way I can directly read and write floppy disks via my fileserver? The motherboard of my fileserver is soon the only motherboard that has a actual floppy…
  • geaves -

    Replied to the thread Windows 10 Creators failure to locate CIFS/SMB shares.

    Post
    Quote from carriba: “Is there anything else I can check within OMV4 so that I can further nail down the origin of the problem? ” So you're saying that if you open file explorer select network then in the address bar \\<ip address of omv> hit enter…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “PSU ? ... I have maybe 20-30 of these power supplies in my cave , even a hc2 would have one, don't get your point! ” My whole point was that using on 'oversized' PSU wastes energy for nothing. PSUs get really inefficient in the…
  • Pascal51882 -

    Replied to the thread OMV 0.4 Win 10 1803 SMB sehr langsam.

    Post
    Ich habe mir hier schon alles mögliche durchgelesen. Nichts passt richtig zu meinem Problem. Da 2 Rechner schnellen Zugriff haben und 2 nicht wird Samba tuning wie im zweiten Link leider nicht viel bringen. Hängen alle am selben Switch und alle Kabel…
  • carriba -

    Replied to the thread Windows 10 Creators failure to locate CIFS/SMB shares.

    Post
    No here a recap again on my yesterday and again today accomplished findings: Access to an OMV4 server using SSH terminal prompt and FTP shared folder is working fine with all Windows7, macOS, and Windows 10 operating systems. Access to the same OMV4…