openmediavault

The open network attached storage solution

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

News

  • New

    Hi,

    I begin a new post after reinstallation OMV 4

    My old sytem OMV 2.XX was crashed.

    i would rebuid my old pool who was on ZFS

    i 'm at the beginning :
    I installed SSL
    and follow this tuto :
    i have instaledl plugin OMVextra
    install promox kernel
    and remove the other kernel ( seems to be better to install ZFS )

    now : i'm on linux4.15 18-4

    but when i'm going in zfs section and try to create a new pool , i don't see the devices.
    but there are on disk section. ( i have 6 disks )

    1 Ask : it's the good way to refind my old pool on my several disks
    2 why i'm don't see the devices


    thanks for your helping to find my 6 Tera data :/
  • New

    So I had an asymmetrical Raid1 as a basic file server. One drive was .5Tb and the other was 2Tb. I just replaced the .5 with another 2Tb, and I'm trying to resize the filesystem to match the new size.

    My issue is functionally identical to the one in this thread, so I followed the same instructions, ie forcing mdadm to resync to the max capacity. However now that it's completed, the webclient still is showing the former size, and the thread essentially stops after running this command. What do I need to do to get it the right size? My guess was to ssh into the system and run parted, but I figured there's a better way to do this.

    EDIT: After looking around on the forum, it looks like doing a Raid1 was a bad idea from the get-go (or at least should have been migrated at some point over the past couple of years). Since I have the old drive and no new data had been added, could I create a btrfs pool with the 2Tb drives, plug the old drive into my desktop, and copy everything over?

Unread Threads

Topic Replies Last Reply

Pi-hole in doker network problem

20

geaves

Add a cron job for Nexctloud in a docker

0

Omv ladet webinterface nicht

6

strix

*UPDATE DOCKER Pi-HOLE*

18

ryecoaaron

Questions on Docker

2

Methy

Recent Activities

  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from Nefertiti: “Sep 20 15:51:12 raspberrypi ifup[9302]: Cannot find device "eth0" Sep 20 15:51:12 raspberrypi ifup[9302]: ifup: failed to bring up eth0 Sep 20 15:51:12 raspberrypi systemd[1]: networking.service: Main process exited, code=exited,…
  • Mr.Grape -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from geaves: “Hmmmm yes, if you assign a static ip within a dhcp scope the dhcp server has no idea that that address has been allocated and it will/can assign it to a machine on the network, hence using an ip address outside the scope.Dynamic,…
  • Mr.Grape -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from flmaxey: “BTW: you don't have to used Google's public DNS servers. There are plenty to chose from. DNS servers ” Personally, I would recommend checking the res times before choosing DNS. grc.com/dns/benchmark.htm
  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from Mr.Grape: “Hmmm Imho, no ... Or I misunderstand you. ” Hmmmm yes, if you assign a static ip within a dhcp scope the dhcp server has no idea that that address has been allocated and it will/can assign it to a machine on the network, hence…
  • MrC -

    Posted the thread OMV 4.x Add a cron job for Nexctloud in a docker.

    Thread
    Hi there ! I installed Nextcloud in a docker and it's working perfectly fine : ) But now, i'ld like to make Preview Generator work, wich needs to add a cron job. I understand (do I ?) how a cron job works, but I don't understand how to set it up. I have…
  • Nefertiti -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Source Code (49 lines)Here what I got Quote from flmaxey: “I can see that the address you were using (.220) was out of your scope .2 to .200. (And now it appears to be back in the DHCP range with an address of .57) What seems to be the issue now? …
  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from flmaxey: “What seems to be the issue now? Are changes to network settings working? Or are your changes getting the yellow confirmation banner but not actually being set? ” We've managed to remove the router from the equation, but not…
  • Nefertiti -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Source Code (49 lines)Here what I got
  • strix -

    Replied to the thread Omv ladet webinterface nicht.

    Post
    hab jetz versucht mit der omv 3.0 wieder zu installieren und der pc ist beim booten vom System immer abgestürzt und ist in ne dauerschleife von starten und abstürzen gegangen danach hab ich omv 4.0 installiert und bis jetz geht alles danke euch :)
  • Mr.Grape -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from geaves: “To assign a static IP address to something on your network it needs to be outside of the DHCP scope/range ” Hmmm Imho, no ... Or I misunderstand you. ;) Whether the address is static or dynamic does not depend on whether it is out of…