Recent Activities

  • flmaxey -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    Quote from Agricola: “Now, if I insert the host path as directed, will the folders be created in the process? ” Yes (As previously stated.) Quote from Agricola: “So is this what I am looking for? ” Basically, yes. Quote from Agricola: “You…
  • Hi, I have this same error but in my case my HDD is dead. What can I do? Thanks :)
  • Markess -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from elastic: “Never mind, found a tool on intel's website. ” Best to cross check whatever you find there with the CPU Support page for your Motherboard. I think this is the one: asrockrack.com/general/product….asp?Model=C236%20WSI#CPU Along…
  • elastic -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from tkaiser: “If both CPU and mainboard support ECC-RAM there's nothing to take care of. I would install edac-utils as additional step then and check error logs from time to time... ” Quote from Markess: “Quote from elastic: “am currently…
  • Quote from ryecoaaron: “Quote from eptesicus: “I have no idea. I deployed these servers from the OMV install ISO, and I have no idea if I can remove appstream or not. ” It is not installed by the OMV ISO and I don't know any plugins that require…
  • Agricola -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    forum.openmediavault.org/index…1b5e7b2e67ba3ea43aa27c295 So is this what I am looking for? You stated that the test validations do not work. So how do I know unbound is working? And explain this to me: my wifi workes to my laptop, but my mobile devices…
  • tinh_x7 -

    Replied to the thread Nextcloud setup issue.

    Post
    Remove your entire Nextcloud directory, and start a fresh installation.
  • lagerman43 -

    Replied to the thread Nextcloud setup issue.

    Post
    How do I go about resetting everything that pertains to nextcloud? You will have to forgive me since I am fairly new to this side of the NAS/Server side.
  • Agricola -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    Quote from flmaxey: “Sorry, when you used Watchtower, you voided the warranty ” I do agree...now. This is another topic all together, but how do you update your dockers? Quote from flmaxey: “If it's not there, then either there was a deviation…
  • veveaucent -

    Posted the thread Virtualbox on OMV question.

    Thread
    Quick question, I would like to run a virtualbox of Windows 10 on my OMV host computer. I would like to access this virtual machine on my host machine (not through a web browser or web gui but using the OMV's host display). My current setup is the…
  • flmaxey -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    @Agricola : Sorry, when you used Watchtower, you voided the warranty on this Pi-hole How-To. (See customer service to get your money back. :) ) While some use Watchtower and like it, I'm not one of them. There's too many variables that Watchtower can't…
  • kmal808 -

    Replied to the thread OMV 4.x Unofficial OMV Theme Changer tool, css themes and UI manipulation.

    Post
    Nice. I’ve been enjoying your theme changing tool and look forward to testing the plugin. I’ll install the deb after work today. Lmk if there’s anything specific you’d like tested or feedback on, I’d be happy to help. Appreciate all of your…
  • ryecoaaron -

    Replied to the thread OMV 4.x Problem with omvextra repositories.

    Post
    Quote from slb20: “still get an error.. ” What error? Quote from slb20: “Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?" ” This sounds like the plugin's leftover /etc/default/docker file is…
  • Quote from eptesicus: “I have no idea. I deployed these servers from the OMV install ISO, and I have no idea if I can remove appstream or not. ” It is not installed by the OMV ISO and I don't know any plugins that require it. It isn't on any of my…
  • hoppel118 -

    Liked ryecoaaron’s post in the thread How to restore OMV 4.X from backup-plugin to system SSD.

    Like (Post)
    Nice guide. I would only add that if you are restoring to a new disk, write the backup of grub and the partition table (.grubparts file) to the disk before the fsarchiver restfs step with: dd
  • hoppel118 -

    Liked bvrulez’s post in the thread How to restore OMV 4.X from backup-plugin to system SSD.

    Like (Post)
    My hardware setup is - CPU x64 - RAID6 with 7 disks (yes, I will change to snapraid) - SSD with operating system OMV4 connected to SATA port - backup flash USB option (if SSD does not work, I plug in usb and restart) - The BIOS boot order should be…
  • Markess -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from elastic: “am currently using ZFS with Non-ECC Ram. ” If it's the system shown in your signature, the i7-6700 doesn't support ECC RAM. So, while you can install the ECC RAM and it will probably boot, you won't have any ECC…
  • tkaiser -

    Replied to the thread OMV 4.x Brother MFC-495CW with CUPS.

    Post
    Quote from TechAndrew: “is there any other way of getting my printer to work? ” No idea. Only insights I could provide is that this is a layered approach. For a printer running with Linux you need drivers or 'CUPS filters'. In case Brother only…
  • TechAndrew -

    Replied to the thread OMV 4.x Brother MFC-495CW with CUPS.

    Post
    Quote from tkaiser: “Quote from TechAndrew: “mfc495cwlpr-1.1.3-1.i386.deb mfc495cwcupswrapper-1.1.3-1.i386.deb ” Since those packages are called .i386.deb it's very unlikely that the installed software works on an ARM board. ” I thought so... So, is…
  • Kai -

    Replied to the thread Simplifying The OMV Configuration Backup and Restore Process.

    Post
    Quote from ryecoaaron: “Just to make your life a little simpler, I have cloned Windows and Linux systems with clonezilla before. So, you could have one process for both :) ” Thanks. I'm just now studying this tekkb thread . I think things are getting a…