Recent Activities

  • geaves -

    Replied to the thread The Class E Network.

    Post
    Quote from flmaxey: “Edit: Well that didn't work out very well. While going through the script process..... ” I'm sure I read somewhere that @macom was trying this.
  • geaves -

    Liked cghill’s post in the thread Trying to swap drives in RAID1 but RAID is missing.

    Like (Post)
    Wow, thank you @flmaxey for the very informative response as well as all the resources you linked. You make a very strong case for OMV and I think I will give it a try so I can sunset my DS211j. Thank you as well @geaves for helping me sort through…
  • votdev -

    Replied to the thread OMV 3.x Tons of unrecoverable read errors.

    Post
    OMV3 is end of life, please upgrade to OMV4.
  • votdev -

    Replied to the thread OMV 3.x Tons of unrecoverable read errors.

    Post
    Your disk seems to be corrupted, i suggest to replace it. Check the status of the disk with SMART. If you've enabled emails notifications you'll get the notification that your system is under high load loadavg(5min) of 4.1 matches resource limit
  • votdev -

    Replied to the thread Updated 3->4 and now POSTFIX ERRORS.

    Post
    Try to recreate the postfix config Shell-Script (2 lines)
  • votdev -

    Replied to the thread OMV 3.x add monit entry.

    Post
    Simply create a file called /etc/monit/conf.d/my-test.conf. Don't calll it something like 'openmediavailt-xxx.conf' and you're fine.
  • peram -

    Replied to the thread OMV 4.x OMV 4 Zoneminder.

    Post
    Quote from peram: “Quote from ryecoaaron: “Quote from peram: “does not work with the proposed docker for arm ... docker: koenkk / rpi-zoneminder ” What kind of system are you using? ” OMV4 on Odroid HC2 ...setting port 8080 but when I launch I…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “ROCKPro64 4GB SingleBoard Computer ROCKPro64 30mm TallProfile Heatsink ROCKPro64 MetalDesktop/NAS Casing ROCKPro64 12V 5A EUPOWER SUPPLY ROCKPro64 PCI-e toDual SATA-II Interface Card Fan for ROCKPro64Metal Desktop/NAS casing ” So…
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Ps: As long as the HC2 is not available
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Much to read ... ufff After all I am not so wrong with a RockPro64 with housing and internal SATA, even its lacking the SBC charme ... ;-)) (As i got diffrent proposals here ...) My approach ROCKPro64 4GB SingleBoard Computer ROCKPro64 30mm…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “is there a complaint about using intern SATA-Card instead an external USB-Cabeling? ” Nope. Internal SATA will be more reliable by design as already said (USB3-A receptacles are fragile crap in my opinion and at least I had no luck…
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from tkaiser: “For your use case the HC2 is still the best option (and should be back in stock in early 2019 if I understood Pollin.de correctly). ” Thank you for this clear message, but ... Pollin drove me crazy. On their Website the HC2…
  • happyreacer -

    Liked votdev’s post in the thread OMV 5.x (development) core Install OMV5 on Debian 10 (Buster).

    Like (Post)
    To install OMV5 on an already installed Debian 10 (Buster), simply execute the following steps: Source Code (11 lines)Shell-Script (15 lines)
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “I think i'll give RockPRO a chance, is it possible to install the System on the eMMC-Module? ” Sure. But this is as useless as using a RockPro64 for the job in the first place. It just costs a lot more money and wastes more energy…
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Switched over to the Pine64 Website .... they got a nice NAS-Case, Cabeling, AC-Supply, PCIe I think i'll give RockPRO a chance, is it possible to install the System on the eMMC-Module?
  • tkaiser -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    Quote from esbeeb: “I'm using SMB3.11, I got this by running the "smbstatus" command ” You do not get the SMB version/dialect this way since client and server negotiate this dynamically. But since you haven't changed settings at least you're not…
  • peram -

    Replied to the thread OMV 4.x OMV 4 Zoneminder.

    Post
    Quote from ryecoaaron: “Quote from peram: “does not work with the proposed docker for arm ... docker: koenkk / rpi-zoneminder ” What kind of system are you using? ” OMV4 on Odroid HC2 ... setting port 8080 but when I launch I am getting…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ” Of course as long as - you use a good USB to SATA bridge (JMS578 for example) - you don't run into cabling/contact issues (a very 'popular' problem…
  • cghill -

    Replied to the thread Trying to swap drives in RAID1 but RAID is missing.

    Post
    Wow, thank you @flmaxey for the very informative response as well as all the resources you linked. You make a very strong case for OMV and I think I will give it a try so I can sunset my DS211j. Thank you as well @geaves for helping me sort through…
  • youtu.be/arrHdrbKaEk Today, we will install Tautulli using docker to monitor our Plex watchinghabits. You need to have Plex installed to use this. Here is a video on how to do that: Plex Video For Raspberry Pi use this docker: lsioarmhf/tautulli