Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • dikkepanda -

    Posted the thread OMV 4.x Disk unmount after reboot.

    Thread
    When I reboot my omv, the external hard disk is unmount. After reboot I can manually mount it via the GUI without any problems.
  • geaves -

    Replied to the thread OMV 4.x MPD Server Guide?.

    Post
    What might be incorrect is the extra arguments, I can understand -d and why @flmaxey has used that, but the invalid format implies that a format is not set correctly, i.e. capital letters rather than lower case. The -d makes sense, but it could be that…
  • Adoby -

    Replied to the thread OMV 4.x Flash Memory Plugin and Plex -.

    Post
    1. No. The flash plugin radically reduce the amount of writes a fresh install does to the rootfs on the flash memory. But there is nothing to stop writes to the rootfs if you install additional plugins or other software. For instance Plex. 2. In my Plex…
  • suresh -

    Wrote a comment on mbesar’s wall.

    Wall Comment
    nice
  • suresh -

    Now follows ryecoaaron.

    Follow
  • suresh -

    Now follows davidh2k.

    Follow
  • suresh -

    Wrote a comment on suresh’s wall.

    Wall Comment
    Hello guys, If you are looking for the government job and especially you want to do the job in the railway then you have to visit my site to know about the latest railway job notification.
  • skyline1 -

    Replied to the thread OMV 4.x Error after install.

    Post
    I think I have found the cause of this problem When I updated it loaded the Linux 4.18.0 Kernel which was the default restart Kernel On the next restart I hit space on the boot screen to stop the timer and selected the 4.14.0 Kernel and booted…
  • cezargradianu -

    Replied to the thread New to OMV and Rasberry pi 3 b+.

    Post
    Got it to work. Thank you guys! Issue with the sharing. I’m doing the windows share and Mac share, but I created a user and went to set read and write on that user for the shared folders yet when I access the folder I can only read. Any ideas?
  • tr3bjockey -

    Replied to the thread OMV 1.0 Motherboard suggestion for OMV with PLEX transcoding.

    Post
    I saw this site that tells you if your motherboard is compatible with Debian. kmuto.jp/debian/hcl/ASUS/M5A99FX+PRO+R2.0 I check our motherboard and noticed that ASM1042 SuperSpeed USB Host Controller did not have a "yes" next to it. I do have a usb…
  • Enable SSH with Public Key Authentication (Securing remote webUI access to OMV) Intro This guide covers how to enable ssh access in omv with PKA, this will secure access to the text console to allow only the person who has the private key to access…
  • cruachan -

    Replied to the thread OMV 4.x MPD Server Guide?.

    Post
    Hi TechnoDadLife, Can I ask was it the same docker image (vimagick/mpd) that you were trying to setup or another one?. And if it was the same one did you get further than me (ie did you get the container to run but failed to get it configured correctly)…
  • tr3bjockey -

    Posted the thread OMV 4.x Flash Memory Plugin and Plex -.

    Thread
    I was thinking about using the flash memory plugin (since I temporarily use a 32gb SD card through usb 3.0) as my boot drive for OMV. I checked bintray.com/openmediavault-plu…iavault-flashmemory/view# There is no documentation on the readme or the…
  • jollyrogr -

    Replied to the thread OMV 4.x How to partition data disks.

    Post
    why raid 1? I would recommend using an automated rsync backup or something along those lines.
  • booga -

    Posted the thread OMV 4.x Create iptables rules in CLI.

    Thread
    Hello :) , I'm going to make my server available from the outside. I would like to use iptables for more security. However, I don't want to use the graphical interface because I already have my own set of rules. Is that possible? I thought I would carry…
  • jcd -

    Replied to the thread How to replace default network interface with macvlan?.

    Post
    I haven't given up yet! I think my configuration script above was wrong and couldn't work at all. In the help I found this example: openmediavault.readthedocs.io/en/latest/various/advset.html. I also made some progress with the macvlan topic. With the…
  • gderf -

    Replied to the thread Transcoding failure Plex - Docker.

    Post
    Quote from NoobNoob: “I moved the /config docker directories to my SSD and now it works. They were on my Raid5 file system which had the 'noexec' option in /etc/fstab. Thank you, you're the best! ” Just be aware that the PMS database can become…
  • NoobNoob -

    Replied to the thread Transcoding failure Plex - Docker.

    Post
    I moved the /config docker directories to my SSD and now it works. They were on my Raid5 file system which had the 'noexec' option in /etc/fstab. Thank you, you're the best!
  • NoobNoob -

    Liked gderf’s post in the thread Transcoding failure Plex - Docker.

    Like (Post)
    What hard drive holds your PMS database (the one where the /config docker path points to)? Is that drive mounted with the exec option in /etc/ftsab?