Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from Nefertiti: “Sep 20 15:51:12 raspberrypi ifup[9302]: Cannot find device "eth0" Sep 20 15:51:12 raspberrypi ifup[9302]: ifup: failed to bring up eth0 Sep 20 15:51:12 raspberrypi systemd[1]: networking.service: Main process exited, code=exited,…
  • Mr.Grape -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from geaves: “Hmmmm yes, if you assign a static ip within a dhcp scope the dhcp server has no idea that that address has been allocated and it will/can assign it to a machine on the network, hence using an ip address outside the scope.Dynamic,…
  • Mr.Grape -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from flmaxey: “BTW: you don't have to used Google's public DNS servers. There are plenty to chose from. DNS servers ” Personally, I would recommend checking the res times before choosing DNS. grc.com/dns/benchmark.htm
  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from Mr.Grape: “Hmmm Imho, no ... Or I misunderstand you. ” Hmmmm yes, if you assign a static ip within a dhcp scope the dhcp server has no idea that that address has been allocated and it will/can assign it to a machine on the network, hence…
  • MrC -

    Posted the thread OMV 4.x Add a cron job for Nexctloud in a docker.

    Thread
    Hi there ! I installed Nextcloud in a docker and it's working perfectly fine : ) But now, i'ld like to make Preview Generator work, wich needs to add a cron job. I understand (do I ?) how a cron job works, but I don't understand how to set it up. I have…
  • Nefertiti -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Source Code (49 lines)Here what I got Quote from flmaxey: “I can see that the address you were using (.220) was out of your scope .2 to .200. (And now it appears to be back in the DHCP range with an address of .57) What seems to be the issue now? …
  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from flmaxey: “What seems to be the issue now? Are changes to network settings working? Or are your changes getting the yellow confirmation banner but not actually being set? ” We've managed to remove the router from the equation, but not…
  • Nefertiti -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Source Code (49 lines)Here what I got
  • strix -

    Replied to the thread Omv ladet webinterface nicht.

    Post
    hab jetz versucht mit der omv 3.0 wieder zu installieren und der pc ist beim booten vom System immer abgestürzt und ist in ne dauerschleife von starten und abstürzen gegangen danach hab ich omv 4.0 installiert und bis jetz geht alles danke euch :)
  • Mr.Grape -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from geaves: “To assign a static IP address to something on your network it needs to be outside of the DHCP scope/range ” Hmmm Imho, no ... Or I misunderstand you. ;) Whether the address is static or dynamic does not depend on whether it is out of…
  • flmaxey -

    Replied to the thread Pi-hole in doker network problem.

    Post
    I can see that the address you were using (.220) was out of your scope .2 to .200. (And now it appears to be back in the DHCP range with an address of .57) What seems to be the issue now? Are changes to network settings working? Or are your changes…
  • austin1 -

    Liked geaves’s post in the thread *UPDATE DOCKER Pi-HOLE*.

    Like (Post)
    The new Docker Pi-Hole is pihole/pihole previously it was diginc/pi-hole, this is the latest V4.0
  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Can you SSH into the Pi? if you can you'll need the output from systemctl status networking.service journalctl -xe The other way to do this is to connect a keyboard and monitor to the Pi and run omv-firstaid and select option 1 Configure network…
  • Nefertiti -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from gderf: “In OMV's Network Advanced settings you have MTU set to zero. Try 1500 instead. ” Quote from geaves: “That's an unusual router setup, however there a few things I would do; Change the DHCP scope if you can change the end pool to…
  • ryecoaaron -

    Replied to the thread *UPDATE DOCKER Pi-HOLE*.

    Post
    Quote from jollyrogr: “ Which RPi were you using? Can't imagine Pi-hole needs much in the way of resources. There are other more powerful SBC's available now that might work better... ” Rpi2 or 3. Don’t remember. My mac mini does other things as…
  • Methy -

    Replied to the thread OMV 4.x Questions on Docker.

    Post
    Quote from flmaxey: “Quote from Methy: “Hello, I have some questions about how docker works ” Dockers are mini-Virtual Machines's not unlike a workstation or server VM running in Virtualbox. Some of the differences are: - A full VM can be, and…
  • flmaxey -

    Replied to the thread *UPDATE DOCKER Pi-HOLE*.

    Post
    My preference is for a Docker, because of shared memory with the host and the minimalist bare-bones approach. However, I appreciate the links. If other packages are bundled in VM's, that work in Virtualbox, they might be useful for exploring and testing…
  • flmaxey -

    Liked jollyrogr’s post in the thread *UPDATE DOCKER Pi-HOLE*.

    Like (Post)
    Quote from flmaxey: “So ARM architectures run in Virtualbox VM's? Is that a recent development? I'll have to check that out. ” It's not ARM. It's a lightweight Debian based on x86_64. dietpi.com Click on download and then PC/VM and they have a…
  • Methy -

    Liked flmaxey’s post in the thread OMV 4.x Questions on Docker.

    Like (Post)
    Quote from Methy: “Hello, I have some questions about how docker works ” Dockers are mini-Virtual Machines's not unlike a workstation or server VM running in Virtualbox. Some of the differences are: - A full VM can be, and often is, as fully…
  • jollyrogr -

    Replied to the thread *UPDATE DOCKER Pi-HOLE*.

    Post
    Quote from ryecoaaron: “I run pi-hole on an old mac mini running Ubuntu 18. Much faster and more stable than an RPi that I initially tried. ” Which RPi were you using? Can't imagine Pi-hole needs much in the way of resources. There are other more…