Recent Activities

  • tkaiser -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    Quote from esbeeb: “I'm using SMB3.11, I got this by running the "smbstatus" command ” You do not get the SMB version/dialect this way since client and server negotiate this dynamically. But since you haven't changed settings at least you're not…
  • peram -

    Replied to the thread OMV 4.x OMV 4 Zoneminder.

    Post
    Quote from ryecoaaron: “Quote from peram: “does not work with the proposed docker for arm ... docker: koenkk / rpi-zoneminder ” What kind of system are you using? ” OMV4 on Odroid HC2 ... setting port 8080 but when I launch I am getting…
  • tkaiser -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Quote from mipi: “Is a external usb-drive the same as direct attached sata3-drive in the HC2-Setup? ” Of course as long as - you use a good USB to SATA bridge (JMS578 for example) - you don't run into cabling/contact issues (a very 'popular' problem…
  • cghill -

    Replied to the thread Trying to swap drives in RAID1 but RAID is missing.

    Post
    Wow, thank you @flmaxey for the very informative response as well as all the resources you linked. You make a very strong case for OMV and I think I will give it a try so I can sunset my DS211j. Thank you as well @geaves for helping me sort through…
  • youtu.be/arrHdrbKaEk Today, we will install Tautulli using docker to monitor our Plex watchinghabits. You need to have Plex installed to use this. Here is a video on how to do that: Plex Video For Raspberry Pi use this docker: lsioarmhf/tautulli
  • youtu.be/jS4oiJcrrR4 Today, we install Heimdall which creates a simple dashboard to organize and provide ready access to our docker apps and server.
  • mipi -

    Posted the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Thread
    After my old QNap with OMV 3 overcome its lifecycle i am looking for a small installation for a backup system with one Harddisk, running OMV 4/5 and simply rsync'ing my home-nas providing the backup via nfs/cifs. I think I do not have high demands,…
  • neeqkowlah -

    Posted the thread OMV 3.x add monit entry.

    Thread
    hello, first, i hope everybody will understand my poor english ;) i found many thread speaking about modifying parameters in monit configuration, but i didn't found a thread about adding a new entry. I just want to monit with a network ping test if a…
  • esbeeb -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    Quote from tkaiser: “~35MB/s ” Yes, that's that fastest I've ever been able to get, on average (as in, I always purposely outrun the disk buffers because I upload/download 2GB worth of files as a test), when downloading over FTP (37 MB/sec,…
  • esbeeb -

    Replied to the thread Call for testers: OMV4 for ARM boards.

    Post
    I'm just using the standard SMB support which OMV 4 offers, without hacking the default SMB settings. Is that SMB1, SMB2, or SMB3? Samba supports up to SMB3, apparently. Perhaps I too hastily assumed that I was using SMB1, believing it to be the
  • marcsgirall -

    Replied to the thread OMV 4.x Virtualbox VNC Issue.

    Post
    So I’ve been trying to find the ConsoleImpl.cpp file to patch & I can’t for the life of me find it in the plugin version of VBox.
  • gderf -

    Replied to the thread Downloads not working for torrents.

    Post
    In Deluge you can use the Test Active port tool found in Preferences | Network. You must have working forwarded ports that are accessible from the outside internet or downloads will not work. In the docker, Host mode networking would be a better choice.
  • Agricola -

    Replied to the thread OMV 3.x NextCloud Installation Q & A.

    Post
    Well, I guess I did have my ports forwarded properly: forum.openmediavault.org/index…6bf0316517c9cf803192f95a6 The new Letsencrypt video tutorial worked flawlessly. Thanks @TechnoDadLife. Now to get Nextcloud folded in.
  • ryecoaaron -

    Replied to the thread OMV 4.x Duplicati plugin Suggestion.

    Post
    While I agree it probably could use some improvement, I don't plan on porting it to OMV 5.x in favor of using docker. The plugin isn't much more than an enable button anyway. So, you could start using the docker now and get the customization you want. …
  • MickBurke -

    Posted the thread OMV 3.x Tons of unrecoverable read errors.

    Thread
    So I've got an OMV 3.x server that I made out of an old dell PE 840, with 4 2TB drives in the Dell SAS Raid enclosure. Over the weekend a VM that I have on it failed. When i checked it out found tons of 'medium errors' and 'unrecoverable read errors'. I…
  • Guillermo -

    Replied to the thread OMV 4.x Resolved linuxserver / mariadb - empty nextclouddb folder.

    Post
    Quote from vedatorkun: “Quote from geaves: “Well that looks Ok, but what I did (see your second image) I checked the option Recursive (Apply permissions to files and subfolders) to the AppData share, that was the only way I could get the Heimdall data to…
  • youtu.be/WO9WS3zpAF0 Today, we will install Watchtower into a Openmediavault docker. Watchtower will then automatically update our other dockers.
  • youtu.be/xqaK9nRuulE Today, we will clean up the all containers left by Watchtower. Source Code (1 line)Special thanks to @gammarayburst and @raulfg3
  • flmaxey -

    Replied to the thread The Class E Network.

    Post
    There's a LOT to absorb on the Ceph topic but, with the barest of overviews, it seems to be interesting. I'm not sure I could do much with a cluster configuration (who knows what could be done in VM's?) so I'll be looking at what can be done at the host…
  • fognar -

    Posted the thread OMV 4.x Duplicati plugin Suggestion.

    Thread
    Currently the OMV Duplicati plugin doesn't include any means to customize how the server runs and or add custom variables to the /etc/default/duplicati file that the service uses. from what I've found, this makes the default service more or less useless…