Recent Activities

  • KM0201 -

    Liked geaves’s post in the thread OMV 4.x What to do if hardware fail?.

    Like (Post)
    Quote from Marfio: “HP ML350 gen6 server ” You have to disable the raid option within the bios on those servers, it's set to use the Embedded Smart Array by default, once you have done that the disks can be set up independently or as a software raid.
  • KM0201 -

    Replied to the thread OMV 4.x Error msg while installing docker plugin.

    Post
    Quote from PC_Pal68: “Quote from KM0201: “log in on the console or via ssh as root apt-get update apt-get upgrade apt-get dist-upgrade when that's all done, apt-get -f install The docker plugin install was (not sure if it still is) was…
  • flvinny521 -

    Replied to the thread OMV 4.x OMV4 plex error playback.

    Post
    Is Plex installed with the plugin or in Docker? If Docker, is it installed on your system drive?
  • raulfg3 -

    Replied to the thread OMV 4.x Fallo en la instalacion de pihole.

    Post
    el manual es el mismo que he seguido yo, por lo que mientras no vea lo que has puesto en el docker por si alguna orden o configuracion esta mal, no podre ayudarte. Por cierto postea el link de la imagen que has instalado. eg; yo uso ahora pihole/pihole
  • geaves -

    Replied to the thread OMV 4.x What to do if hardware fail?.

    Post
    Quote from Marfio: “Mmmm.... probably the best thing is to find a PCI express sata controller (not a RAID)... and connect the disk to there.... ” Looks like it, is the controller fitted to the drive cage then connected to the board? Edit: Found the…
  • PC_Pal68 -

    Replied to the thread OMV 4.x Error msg while installing docker plugin.

    Post
    Quote from KM0201: “log in on the console or via ssh as root apt-get update apt-get upgrade apt-get dist-upgrade when that's all done, apt-get -f install The docker plugin install was (not sure if it still is) was broken. That should fix the…
  • geaves -

    Liked bvrulez’s post in the thread OMV 4.x Why is my RAID array not active?.

    Like (Post)
    Stopping the array will make it disappear (from /dev/md127). Then it is not possible to add a disk any more. I used mdadm --assemble --scan (after stopping it) and then added the disk. The GUI did not know about my (inactive) array. So I could not…
  • bvrulez -

    Replied to the thread OMV 4.x Why is my RAID array not active?.

    Post
    Stopping the array will make it disappear (from /dev/md127). Then it is not possible to add a disk any more. I used mdadm --assemble --scan (after stopping it) and then added the disk. The GUI did not know about my (inactive) array. So I could not…
  • PC_Pal68 -

    Liked KM0201’s post in the thread OMV 4.x Error msg while installing docker plugin.

    Like (Post)
    log in on the console or via ssh as root apt-get update apt-get upgrade apt-get dist-upgrade when that's all done, apt-get -f install The docker plugin install was (not sure if it still is) was broken. That should fix the problem.
  • Marfio -

    Replied to the thread OMV 4.x What to do if hardware fail?.

    Post
    Mmmm.... probably the best thing is to find a PCI express sata controller (not a RAID)... and connect the disk to there....
  • geaves -

    Replied to the thread OMV 4.x low start because of the network?.

    Post
    No picture :) and what is your hardware when you say pc?
  • Darknesse -

    Posted the thread OMV 4.x low start because of the network?.

    Thread
    Hello, I just finished installing omv 4 on my pc. After that I noticed that it took a lot of time to start, in fact I have the impression that at each startup it must search the connection to the internet. I put you below a picture of the page in…
  • KM0201 -

    Replied to the thread OMV 4.x Error msg while installing docker plugin.

    Post
    log in on the console or via ssh as root apt-get update apt-get upgrade apt-get dist-upgrade when that's all done, apt-get -f install The docker plugin install was (not sure if it still is) was broken. That should fix the problem.
  • KM0201 -

    Replied to the thread New Help me choose OMV.

    Post
    Quote from borngborn: “Quote from KM0201: “I guess if you really must know if this will work (I'm assuming it probably would work w/ Debian) Install Debian 9 to a USB flash drive. Boot Debian 9 Follow those instructions See if you get the desired…
  • geaves -

    Replied to the thread OMV 4.x Why is my RAID array not active?.

    Post
    Quote from bvrulez: “Does "wipe" mean I have to press it under the GUI for hard disks? ” Wipe in the GUI will wipe any signatures on the disk, you can then add it to your array, but I would add the disk via ssh. Without searching the forum I can't…
  • PC_Pal68 -

    Posted the thread OMV 4.x Error msg while installing docker plugin.

    Thread
    Hello again. This aint as smooth as I expected... Tried to install twice. Following Techno Dad Life's video. Keep getting the same error messages. Any suggestion? Regards. forum.openmediavault.org/index…2a813eaa17e71e469289ce31f
  • bvrulez -

    Replied to the thread OMV 4.x Why is my RAID array not active?.

    Post
    I installed a new OMV and deleted the filesystem of my 7th disk in the Web-GUI. It is now not any more appearing in the GUI for file systems. But fdisk -l still shows a partition with a linux filesystem on that disk. Does "wipe" mean I have to press it…
  • PC_Pal68 -

    Liked ryecoaaron’s post in the thread Keep getting /tmp error messages.

    Like (Post)
    Update your system to the latest version of OMV from the Updates tab. This was fixed quite a while ago.
  • josegd71 -

    Replied to the thread OMV 4.x Fallo en la instalacion de pihole.

    Post
    He seguido dos manuales uno por YouTube de technodalife y este manual captura de pantalla ahora no tengo, y donde intento instalarlo es en un Core do dúo un pc de hace 12 años