Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • macom -

    Replied to the thread OMV 3.x Plugins don't install (Odroid C1+ Erasmus 3.0.99.

    Post
    Quote from hanscie: “but it seems that all plugins fail to load ” What does that mean? Do you mean that the plugins do not show up in the GUI? Or do you get some error messages. In any case, why don't you install OMV4? OMV3 is end of life.
  • geaves -

    Replied to the thread OMV 4.x RAID Creation Fails Every Time With Failed to Execute Command On New Installation.

    Post
    TBH that's not an error I have seen before, but a Raid on a Pi is about as reliable as chocolate teapot. Any USB drive connected to the Pi needs to be powered and not rely on the power from the usb ports, another option is to plug the drives into a…
  • macom -

    Replied to the thread Slight difficulty understanding virtual login.

    Post
    Quote from Kai: “It ran through its paces and finally ended up stopping at the [login] dos prompt. ” What you see is the CLI. You need to enter "root" as user and the password you created when you set up the installation. Admin is just for login in…
  • macom -

    Replied to the thread OMV 4.x RAID Creation Fails Every Time With Failed to Execute Command On New Installation.

    Post
    If you search the forum, you will find several strong recommendation not to use RAID in combination with RPi. Most likely you don't need RAID. Use one of the two drives as your primary storage. Then use rsync or rsnapshot to make an "enhanced" mirror…
  • geaves -

    Replied to the thread OMV 4.x Resolved Can't boot after installing HBA.

    Post
    Quote from lvikstrom: “Thank you! ” You're welcome :thumbup:
  • geaves -

    Replied to the thread [ Docker ] Enabling Docker from OMV Docker GUI throws error.

    Post
    Quote from Rahul: “Problem: While the docker plugin is enabled, in services tab docker isn't running. It again throws the usual error. ” In Services -> Docker -> Settings have you enabled it there?
  • lvikstrom -

    Liked geaves’s post in the thread OMV 4.x Resolved Can't boot after installing HBA.

    Like (Post)
    Quote from lvikstrom: “If I remove the drives in the HBA it boots again. ” You might your answer in here
  • sipelaut -

    Replied to the thread Execution failed Service nginx.

    Post
    Quote from tkaiser: “Quote from mrperfektone: “It's a problem that's suddenly come - Could it be my emmc card that is having trouble? ” Don't think so. It's most probably related to logs being kept in RAM, an unclean shutdown (?) and now…
  • sipelaut -

    Liked tkaiser’s post in the thread Execution failed Service nginx.

    Like (Post)
    Quote from mrperfektone: “It's a problem that's suddenly come - Could it be my emmc card that is having trouble? ” Don't think so. It's most probably related to logs being kept in RAM, an unclean shutdown (?) and now folders/files missing below…
  • pratikpatel152 -

    Replied to the thread OMV 3.x RDP to Virtualbox.

    Post
    Quote from spupuz: “got a problem with VM Console, since i got RDP enable only on local host 127.0.0.1, how to i change it? see screenshot ” I had to change the network adapter to bridge and give it the same IP as OMV to get it to work. I'll try…
  • JakRuzL -

    Replied to the thread Unable to create a RAID 1 array.

    Post
    I just have the need to volunteer this observation. I have read thru this whole post in hopes of learning, being that I was attempting something very similar, but could barely stomach reading it to the very end. First of all whomever is allowing…
  • JakRuzL -

    Replied to the thread Unable to create a RAID 1 array.

    Post
    I just have the need to volunteer this observation. I have read thru this whole post in hopes of learning, being that I was attempting something very similar, but could barely stomach reading it to the very end. First of all whomever is allowing…
  • kmal808 -

    Replied to the thread OMV 4.x Docker error for unknown service.

    Post
    Agreed, I’ll have to pick up a similar model to what you linked from Amazon(no Microcenter here). I’ll try the purge and if all else fails, do a rebuild. Definitely a good chance that more than just docker was affected. I actually don’t mind doing…
  • JakRuzL -

    Posted the thread OMV 4.x RAID Creation Fails Every Time With Failed to Execute Command On New Installation.

    Thread
    I am trying to set up a simple mirror between 2 identical (same size and model) new 500G external hard drives. Each time I try to create the RAID I receive the following error. My linux skills are fairly limited so this error may be simpler to figure out…
  • Rahul -

    Replied to the thread [ Docker ] Enabling Docker from OMV Docker GUI throws error.

    Post
    Quote from geaves: “Quote from Rahul: “ Should I reinstall omv? ” No, but have a look at this thread ” So I followed every procedure as follows: 1. Completely remove docker gui and omv extras. 2. Reinstalled again. 3. Enabled the Docker CE plugin in…
  • Kai -

    Liked flmaxey’s post in the thread Now ready for OS drive choice; M2 - - overkill?.

    Like (Post)
    Quote from Kai: “Doesn't it bother you to buy someone else's stuff??? I am always a little hesitant to buy something used and get stuck with a bad purchase. ” My short answer is "No". It's about knowing something about what you're buying. (Knowledge…
  • Kai -

    Liked flmaxey’s post in the thread Now ready for OS drive choice; M2 - - overkill?.

    Like (Post)
    Quote from Markess: “Other some drives, most of my OMV and home server hardware is used or repurposed. Besides the cost savings, using something a generation or two "old" (even if its bought "new" on Ebay or Craigslist or etc.), ensures better
  • flmaxey -

    Replied to the thread OMV 4.x Docker error for unknown service.

    Post
    Choices are narrowing... (An UPS's looks like a great investment at this point.) ("Leases" is in the error message. Usually that's a DHCP function, but Docker has it's own internal IP network and I've never looked that far into it. "Leases not…
  • Kai -

    Replied to the thread Now ready for OS drive choice; M2 - - overkill?.

    Post
    Posts 21, 22, and 23 . . . I follow everything said in those three posts. I see the reasoning behind all comments. My job now is evaluation, which is now a little better understood after seeing the reasoning behind given choices relational to Linux with…
  • Kai -

    Liked Markess’s post in the thread Now ready for OS drive choice; M2 - - overkill?.

    Like (Post)
    Quote from Kai: “I think I am considering some of the lesser knowns like TeamGroup and Silicon Power because of their price. ” I've got an SSD from each of these brands as the OS disk on desktops that get a heavy daily use, and haven't had issues in…