Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • dojrude -

    Replied to the thread OMV 3.x Docker - Folder settings.

    Post
    Thanks. Completely missed the guides. Giving it a go now.
  • N3ST -

    Replied to the thread OMV 3 for ODROID-XU4/HC1/HC2/MC1.

    Post
    Great news! Thank you tKaiser!
  • subzero79 -

    Replied to the thread OMV 3.x Resolved how to modify OMV mount point and add shared folders?.

    Post
    Quote from rickey.mandraque: “so, I understand since the 3.73, OMV mont hdd on /srv/dev-disk-by-label-* but it does not suit me because I use Gnome for many reasons. ” This is a mistake, omv is a headless server not designed to run along a desktop…
  • Hansa -

    Posted the thread OMV 3.x Error "Failed to get the RPC parameters".

    Thread
    Hi guys, yesterday I installed OMV 3.0.86 on my machine and upgraded it to 3.0.88 several times. On version 3.0.86 as well as on 3.0.88 I continuously get errors "Failed to get the RPC parameters." First intention from my side was that I have some…
  • subzero79 -

    Replied to the thread OMV 3.x Docker - Folder settings.

    Post
    You can try the guide in the forum section on how to use the docker plugin. Docker is extensively well documented. docs.docker.com/engine/reference/commandline/run/ Also good public images are also documented on how to run containers. Check linuxserver
  • Sc0rp -

    Replied to the thread Moving drives to HBA from onboard controller.

    Post
    Re, since you use the drives as "bare" block-devices with no underlaying array-functions, it makes no sense to me to move any of the drives from onboard controller to the new HBA. Don't touch the running system, just add the HBA and connect the new…
  • rickey.mandraque -

    Replied to the thread OMV 3.x Resolved how to modify OMV mount point and add shared folders?.

    Post
    I've found!!! I've edit /etc/fstab and /etc/openmediavault/config.xml: XML Source Code (10 lines) Source Code (1 line)i rebooted and voila! but... I have a ghost :-/ forum.openmediavault.org/index…04b4e55186d705b2ced347a64 source:OMV changing
  • Sc0rp -

    Replied to the thread OMV 3.x Directly Connected OMV Hosts Unable to Ping Each Other.

    Post
    Re, Quote from darkarn: “I ping using ip addresses as if I ping using hostnames, the Gigabit NIC of the machines will get the ping instead of the 10 Gbe NICs ” Yeah, that's correct. DNS is working :D Did you tried the brigde-solution? May be it is better…
  • tkaiser -

    Replied to the thread OMV 3 for ODROID-XU4/HC1/HC2/MC1.

    Post
    Quote from N3ST: “Quick question is it possible to upgrade the firmware from 4.9.37 to 4.9.46 or will I have to reinstall everything from scratch? ” That's the kernel, not 'firmware' :) Yes, can be updated on the image with 'apt upgrade' but currently…
  • darkarn -

    Replied to the thread OMV 3.x Directly Connected OMV Hosts Unable to Ping Each Other.

    Post
    Quote from Sc0rp: “Re, Quote from darkarn: “Before setting each link as their own subnet instead of all under one subnet, Windows-PC can ping both NAS1 and NAS2, but NAS1 and NAS2 can't ping to any machine ” That sounds really weired. But in your…
  • Sc0rp -

    Replied to the thread RAID 6 Array (6x8TB) device Disappeared.

    Post
    Re, Quote from tkaiser: “Is it possible that the Adaptec changed disk geometry (possibly hiding sectors from the beginning of the disk since used 'internally')? ” Yeah. HW-RAID-Controllers normally working on pure LBA, which makes easy to "hide"…
  • N3ST -

    Replied to the thread OMV 3 for ODROID-XU4/HC1/HC2/MC1.

    Post
    Hi tKaiser, Thank you for all the amazing work for the Odroid Xu4. Quick question is it possible to upgrade the firmware from 4.9.37 to 4.9.46 or will I have to reinstall everything from scratch? Best regards, N3ST
  • Sc0rp -

    Replied to the thread OMV 3.x Directly Connected OMV Hosts Unable to Ping Each Other.

    Post
    Re, Quote from darkarn: “Before setting each link as their own subnet instead of all under one subnet, Windows-PC can ping both NAS1 and NAS2, but NAS1 and NAS2 can't ping to any machine ” That sounds really weired. But in your construction i would…
  • tkaiser -

    Replied to the thread RAID 6 Array (6x8TB) device Disappeared.

    Post
    Quote from calvin940: “I'll let you know how plan B goes (but really I think the probability is not on my side) ” Well, based on what you reported it seems the Adaptec ate vital information on all your disks :( Quote from calvin940: “OR... SHOULD I GO…
  • tkaiser -

    Replied to the thread OMV 3.x No HDMI output on OMV 3.0.87 image for Banana PI.

    Post
    Quote from dudeofx: “I noticed it didn't delete the 1st time boot file either, soo yea I am guessing something malfunctioned ” Yep, smells like filesystem corrupted and already set to read-only. Wrt HDMI I don't know, it should work but the last…
  • dojrude -

    Posted the thread OMV 3.x Docker - Folder settings.

    Thread
    I'm a complete docker newbie and looking at using it as a way of separating plugins from the OS. I'm trying to get my first plugin up and running (sabnzbd) and while I can talk to it over the network, I'm having real problems with the folders and…
  • HotBlack -

    Replied to the thread OMV 3.x Upgrade 3.x -> 4.x Upgrade from 3.0.88 to 4 - Any pitfalls?.

    Post
    Quote from ryecoaaron: “Quote from HotBlack: “but are 3.x plugins still compatible? ” Some are but why would they need to be? 4.x repos are ready. Quote from HotBlack: “In fact if anybody has any useful info I would be very grateful to hear how…
  • HotBlack -

    Replied to the thread OMV 3.x Upgrade 3.x -> 4.x Upgrade from 3.0.88 to 4 - Any pitfalls?.

    Post
    Quote from ryecoaaron: “Quote from HotBlack: “but are 3.x plugins still compatible? ” Some are but why would they need to be? 4.x repos are ready. Quote from HotBlack: “In fact if anybody has any useful info I would be very grateful to hear how…
  • Lucas.kr -

    Liked davidh2k’s post in the thread German: OMV Anleitung für Anfänger.

    Like (Post)
    --> I will translate this Article to english later on. Da in letzter Zeit gehäuft Themen auftauchen, durch die ersichtlich wird dass die Ersteller die Funktionsweise von OMV nicht verstanden haben, werde ich im folgenden euch eine Einweisung geben, die…
  • happyreacer -

    Replied to the thread OMV 2.x openmediavault-letsencrypt.

    Post
    by the way, can enybody change the pluginconfiguration for a 4096 RSA key? :/ here are a link for the issue on github: github.com/OpenMediaVault-Plug…ault-letsencrypt/issues/4