Recent Activities

  • Revers62 -

    Posted the thread OMV 4.x Sabnzbd Docker slow Download folder speed / Complete folder speed.

    Thread
    I run Sabnzbd with Docker. All work nice. But I see we can test System performance (Pystone) and Download folder speed / Complete folder speed. I have 50 MB result for Download folder speed / Complete folder speed. it is a very low result compared to…
  • flmaxey -

    Replied to the thread OMV 4.x RAID 10 setup long resync.

    Post
    Sorry for the delayed response. Really there's no accounting for sync times on large drives in even larger arrays. There are too many factors involved (drive types, controllers, the type of array, etc). What did you do? How did it come out (or) how…
  • flmaxey -

    Replied to the thread OMV 4.x HP P420i, JBOD, Software raid vs hardware raid, etc.

    Post
    If up-time is that important, is this a business server? RE your questions: - I'd go with software RAID for a single, but significant, reason. Hardware RAID permanently ties the array to a specific model card. With software RAID, RAID flags are added…
  • flmaxey -

    Replied to the thread The Class E Network.

    Post
    RE Hacking the home hub - I like the idea! Buy one E-bay, flash it to unlock it and,,, it wouldn't work.... || ISP's are on to that. You'd have to spoof it's MAC address, other potential and unknown hardware identifiers (a key signature?) AND replicate…
  • Rimsonatoaster -

    Replied to the thread Web GUI not acessible.

    Post
    Quote from votdev: “The read only file system message is really important because this means no files can be created. Can you post the output? ” 'Failed to bind socket: read-only file system Failed to bind socket: read-only file system' Quote from…
  • scarabaeus -

    Replied to the thread OMV 4.x Plugin remote-mount - Auto mount & reload shared folder after network failure.

    Post
    Hello, If i can try something to help yu ... ;)
  • scarabaeus -

    Posted the thread OMV 4.x Openmediavault-backup - Command DD - Restore backup.

    Thread
    Hello, Before i used script to backup my OMV using DD command. Here my commande used via my script : Backup backupcopy : dd if=/dev/sdb of=/mnt/backupcopy.iso bs=4MB REstore backupcopy dd if=/mnt/backupcopy.iso of=/dev/sdc bs=4MB It was very…
  • gderf -

    Replied to the thread OMV 4.x No internal access to nextcloud.

    Post
    You might try adding an entry to your LAN machine PCs hosts files tying subdomain.duckdns.org to the private IP address of your OMV machine. Or if your router supports NAT reflection, enable it.
  • eBomber -

    Posted the thread OMV 4.x No internal access to nextcloud.

    Thread
    I installed nextcloud following the fantastic TechnoDadLife videos (thanks!) and it works perfectly. After that I followed his other video to, thanks to letsencrypt, be able to access safely from the outside. The problem I have now is that I can access…
  • eBomber -

    Liked ryecoaaron’s post in the thread OMV 4.x Resolved Docker plugin - After the last update it does not start.

    Like (Post)
    Quote from kmal808: “That worked for me. Thanks for the fix ryecoaaron. For others wondering step by step....download the deb file, upload it in the plugins tab, then go to the updates management tab and select the update. Clear browser cache and you…
  • Nefertiti -

    Replied to the thread Error with static ip on rock64.

    Post
    SOLUTION. To make it short so you don't need to read the whole thread. Go in OMV GUI configure network as static do not do apply on "The configuration has been changed...." or you will get an an error. remove file in etc/network/interface d and…
  • ala.frosty -

    Replied to the thread How to install VirtualBox on a baremetal OpenMediaVault install.

    Post
    See below. The installation fails due to "you have held broken packages." The only way I've successfully gotten around this is by reverting to the older kernel. And I have tried a LOT of things to get through it. I probably should've documented it all,…
  • ala.frosty -

    Replied to the thread How to install VirtualBox on a baremetal OpenMediaVault install.

    Post
    See below. The installation fails due to "you have held broken packages." The only way I've successfully gotten around this is by reverting to the older kernel. And I have tried a LOT of things to get through it. I probably should've documented it all,…
  • Quote from ryecoaaron: “Remove the backports line(s) from /etc/apt/sources.list ” All of a sudden everything is working
  • Remove the backports line(s) from /etc/apt/sources.list
  • Quote from ryecoaaron: “If you have rebooted, the process can't have it locked anymore. I would remove /var/cache/debconf/config.dat (or copy it to a different location) and try dpkg --configure -a again. ” I thin I did even on a new install I am…
  • If you have rebooted, the process can't have it locked anymore. I would remove /var/cache/debconf/config.dat (or copy it to a different location) and try dpkg --configure -a again.
  • ryecoaaron -

    Replied to the thread OMV 4.x OpenMediaVault-PXE Plugin.

    Post
    Quote from Bonecracker: “i know, and thats unfortunately the case for me... ” So, what is the problem? You don't want to run DHCP on OMV? If not, that is fine but you need to run a proxy dhcp server somewhere that points to the pxe server. You…
  • Bonecracker -

    Replied to the thread OMV 4.x OpenMediaVault-PXE Plugin.

    Post
    Quote from ryecoaaron: “Quote from Bonecracker: “Yes i do. But i didn't know that it was necessary to have DHCP running on OMV to enable PXE, so i stopped trying, bevause i didnt want to do that. ” It isn't necessary. Some people are not able to…
  • ryecoaaron -

    Replied to the thread OMV 4.x OpenMediaVault-PXE Plugin.

    Post
    Quote from Bonecracker: “Yes i do. But i didn't know that it was necessary to have DHCP running on OMV to enable PXE, so i stopped trying, bevause i didnt want to do that. ” It isn't necessary. Some people are not able to specify a PXE server on…