Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • JimT -

    Replied to the thread OMV 4.x raid5 disk failure..

    Post
    Ok, unplugged a drive while powered down and tried the command that ness1602 suggested. changed it a bit to only include dev b,c, and d as those are the remaining 3 in the array. Source Code (4 lines)No joy there. I then went to the GUI under file…
  • tkaiser -

    Liked ryecoaaron’s post in the thread OMV 4.x raid5 disk failure..

    Like (Post)
    Quote from geaves: “Exactly, but to the average home user they believe that raid is the option to have, but when something like that happens (which can also happen from a power outage) they think they have lost everything and the issue is with the…
  • JimT -

    Replied to the thread OMV 4.x raid5 disk failure..

    Post
    One other interesting thing I forgot to mention: Unplug a drive while powered down and the array just goes away in the GUI with no indication of what happened. navigate to OMV from a windows box looking for samba shares and it shows all the shares as…
  • gderf -

    Replied to the thread OMV 4.x Need help with docker plex using @'TechnoDadLife' tutorial, "A server could not be found".

    Post
    Without knowing what hardware you are running this on, and without seeing the container configuration, and without seeing the container log, not much help can be offered.
  • Judibet -

    Replied to the thread RAID 1: how recover RAID and data?.

    Post
    Quote from ness1602: “if your raid is active then mount it somewhere and try to read data. What type of FS is there on md127? ” Hello, It is btrfs. Quote from tkaiser: “Quote from Judibet: “I prefer trying to recover ” Ok, the funny part about…
  • nm, issue solved! I was confused when looking in the filesystem properties and saw the acltype was set to "off" while i found online that this property should be set from "noacl" to "posixacl" to activate ACL on zfs in linux and now i was left wondering…
  • Hi, Been busting my brains for the past 24 hours and it is 1AM for me when I write this but had no luck to make this plex server work, so far I have been following @TechnoDadLife tutorial using the linuxserver/plex docker image, but no luck so far the…
  • liv -

    Posted the thread OMV 3.x Cannot find device while creating a shared folder.

    Thread
    Hi, I've a problem trying to create a shared folder. I cannot see any device in the list. I already have three shared folders working on the same device. Looking in the filesystem list, I cannot mount or unmount this device. It is an ext4 filesystem, not…
  • tzinm -

    Replied to the thread OMV 3.x Resolved Use Telegram as notification service Q&A.

    Post
    Quote from subzero79: “If it has extension it won’t work. ” I am watching the logs, and when I test the notification it returned this: Source Code (1 line)Maybe you know what´s going on. Thank you
  • Adoby -

    Replied to the thread OMV 4.x Slow copy speed.

    Post
    You don't specify anything about your network. Most likely that is where you will find the problem. I assume you have fresh pristine software installs and updated drivers and so on. If not, fix that! Then try to rule out damaged or unseated cables and…
  • riff-raff -

    Replied to the thread OMV 3.x NextCloud Installation Q & A.

    Post
    I upgraded to nextcloud 14 and added Source Code (1 line) to my nginx-config my config is: Source Code (98 lines) I get no errors within Nextcloud -> Settings ->Overview forum.openmediavault.org/index…fe0ca65b518a43f08cac2d6c5 but checking…
  • ryecoaaron -

    Replied to the thread OMV 4.x raid5 disk failure..

    Post
    Quote from geaves: “Exactly, but to the average home user they believe that raid is the option to have, but when something like that happens (which can also happen from a power outage) they think they have lost everything and the issue is with the…
  • ryecoaaron -

    Replied to the thread Error with static ip on rock64.

    Post
    Quote from Ciccius: “No, just the physical interface eth0. ” Ok. I moved this to its own thread since that other thread was caused by a bonding issue. I highly doubt the issue with your rock64 is the image. I have a rockpro64 from ayufan (same…
  • geaves -

    Replied to the thread OMV 4.x raid5 disk failure..

    Post
    Quote from ryecoaaron: “Stopping the inactive array and assembling it allowed it to be started degraded. ” Exactly, but to the average home user they believe that raid is the option to have, but when something like that happens (which can also happen…
  • Ciccius -

    Replied to the thread Error with static ip on rock64.

    Post
    Quote from ryecoaaron: “Are you really trying to setup bonded network adapters on the rock64? ” No, just the physical interface eth0.
  • .H. -

    Replied to the thread OMV 4.x install OMV on my NAS with usb Key.

    Post
    Damn ! I don't have this problem since longtime.. and was ok yesterday... i try to find the problem, and i'm back
  • ryecoaaron -

    Replied to the thread Error with static ip on rock64.

    Post
    Quote from Ciccius: “Thank you votdev, I'll try another image, maybe 64 bits version or the official OMV image for Rock64. ” Are you really trying to setup bonded network adapters on the rock64?
  • ryecoaaron -

    Replied to the thread OMV 4.x raid5 disk failure..

    Post
    Quote from geaves: “I would agree, but I tried this when I first started using software raid as a test when I set up an iscsi backup in school, the output was the same inactive. The idea behind it was to utilise the previous server which had been…
  • Methy -

    Replied to the thread OMV 4.x Error deamon and notification mail.

    Post
    Quote from votdev: “Quote from Methy: “Is it possible to disable email notification for this alert ? (while concerving others) ” No ” Thx :)
  • Ciccius -

    Replied to the thread Error with static ip on rock64.

    Post
    Thank you votdev, I'll try another image, maybe 64 bits version or the official OMV image for Rock64.