Recent Activities

  • diverexe -

    Posted the thread OMV 4.x WiFi dongle - bonding issue.

    Thread
    Hello, Please help me out to solve strange behaviour with a bonding. I've recently purchased Edimax N150 to improve WiFi capabilities. So I've used Source Code (1 line) to connect to the wifi and it looked ok, but nothing really happened as it hasn't…
  • KM0201 -

    Replied to the thread OMV 4.x My NAS future build – some questions also.

    Post
    I've never used an ASRock board, so I can't really comment on that... but I'll tell you that I think you'll be way happier with that Intel NIC. If you find you really like the Gigabyte board, the NIC card I linked isn't outrageously expensive... If you…
  • cabrio_leo -

    Replied to the thread OMV 4.x Adding RAID Card drivers to the system.

    Post
    Quote from ComicKillJoy: “it would have been nice to have the security *should* something go wrong, as this was going to be a build that was located off-site remotely with limited access. ” If availability is an issue, then Raid is a superior option.
  • Reutemann -

    Replied to the thread ODROID XU4 USB 3.0 Disconnect only on OMV.

    Post
    Thanks!
  • rsrsrs -

    Replied to the thread OMV 4.x changing / switching the boot drive from USB Stick to USB > adapter > SSD.

    Post
    if you own a HP ProLiant MicroServer Gen8 never throw away your last VGA Cable (and Monitor with VGA input)
  • Flaschie -

    Liked hoppel118’s post in the thread OMV 4.x Update WARNING: Do NOT ubgrade to Kernel 4.16 if you use ZFS.

    Like (Post)
    Hi, today I updated to the latest kernel 4.19 in debian backports: Source Code (2 lines) zfs 0.7.12 was already installed: Source Code (6 lines) Everything seems to work as expected so far. Regards Hoppel
  • adi_tca -

    Replied to the thread OMV 4.x My NAS future build – some questions also.

    Post
    1st of all, thanks for sharing your thoughts @KM0201. Regarding the motherboard, indeed, I did chose a Gigabyte one based on my past experience with products from these guys. I filtered the motherboards in my search by the number of SATA III ports,…
  • Cloggs -

    Replied to the thread OMV 4.x Resolved Guide to OMV 4 Active Directory Integration.

    Post
    Just to update, as you said "plain site"....it turns out that after a, um, reboot I've now got all users and groups showing in the backend. When I connect to a share, can't seem to authenticate with a known working username and password, but that could…
  • ryecoaaron -

    Replied to the thread OMV 4.x Pagination.

    Post
    Quote from psilva: “How can one request new features? ” github.com/OpenMediaVault/openmediavault/issues Quote from psilva: “Like being able to change the number of items in each page or a search bar main panel for searching a specific user or group or…
  • Mondi_86 -

    Replied to the thread OMV 4.x Virtualbox no vnc, mouse or keyboard access on new vm install.

    Post
    Hallo Zusammen / Hello Together. I´m new here but i think we will write more times together. I Will try to write English as its not so good but i will try. So i have the same Problem as in this Thread but i don´t want to use RDP. I want to use VNC…
  • KM0201 -

    Replied to the thread OMV 4.x My NAS future build – some questions also.

    Post
    I can't answer your question on the SSD boot (I can't really understand why it's not booting either from your post)... Is Secure Boot enabled? Is there a way to disable it in the BIOS. I want to comment on your motherboard. I'm a big fan of Gigabyte…
  • psilva -

    Replied to the thread OMV 4.x Pagination.

    Post
    ryecoaaron, thanks for the answer. How can one request new features? Like being able to change the number of items in each page or a search bar main panel for searching a specific user or group or share if you have many. I don't know if these are to…
  • decantur -

    Liked liquid7’s post in the thread OMV 4.x Unable to boot after installation (Dropping to a shell!).

    Like (Post)
    Quote from liquid7: “Quote from Blubmann: “I boot in live linux und change the mount point from sda1 to sde1 in my case. But I think the best practice is to use the uuid, because this is unique” Thanks, I'll try this. Lähetetty minun ONEPLUS…
  • flvinny521 -

    Replied to the thread MergerFS pool becomes corrupted for an unknown reason.

    Post
    @trapexit I played around in the terminal trying to figure out a command that would cause an error and had no luck. Moves, copies, unpacking, etc. all worked fine, and the issues continued to be experienced only within Docker containers. For the…
  • gderf -

    Replied to the thread OMV 4.x Support network cards.

    Post
    Quote from BJohnD: “I just want to be sure I buy a card that will work (there are a lot around with the same Realtek chip). ” In a word: Intel.
  • BJohnD -

    Replied to the thread OMV 4.x Support network cards.

    Post
    it's a gigabyte h97m-d3h board with a built in Realtek RTL8111 GbE LAN chip, it did work on previous versions, but stopped with an upgrade. The adapter works fine if I boot windows, but OMV can't find it. Looking into it, there seems to be an issue with…
  • rsrsrs -

    Liked ryecoaaron’s post in the thread OMV 4.x Move Boot from USB Flash Stick to SATA or to another USB Device.

    Like (Post)
    Quote from rsrsrs: “it is possible to do this on a separate Pc? ” Yes
  • meynti -

    Replied to the thread OMV 4.x DLNA stürzt ab.

    Post
    Danke für die Antwort, für meinen TV gibt es leider keine APP und die PS4 war mehr ein Workaround als der TV abstürzte und ich den Film weiter sehen wollte. Theoretisch hat es ja funktioniert, stufenloses ruckel freies vorspulen ging auch. Wenn es…
  • ryecoaaron -

    Liked votdev’s post in the thread Eigenen Post "liken".

    Like (Post)
    Keine Ahnung warum User ihre eigenen Beiträge liken können, vielleicht haben das die WBB Entwickler nicht bedacht. Aber ehrlich gesagt sollen sie halt, wenn sie sich damit besser fühlen.
  • ryecoaaron -

    Replied to the thread OMV 4.x Move Boot from USB Flash Stick to SATA or to another USB Device.

    Post
    Quote from rsrsrs: “it is possible to do this on a separate Pc? ” Yes