Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Scriptcore -

    Posted the thread OMV 4.x OMV do not install - hangs on Partition formatting.

    Thread
    Hi all! I hawe a problem whit omv 4.1.3 I try to install from an iso image that is recorded on usb drive I install on ssd connected through sata constantly freezes in the same place on Partition formatting and hold on 33% and thats it! nothing else…
  • MickBurke -

    Replied to the thread OMV 3.x Tons of unrecoverable read errors.

    Post
    The system is an old dell Poweredge 840, OMV4 doesn't work on it. The raid is a RAID 5 array controlled by the dell LSI raid controller, so OMV sees it all as one drive, so I don't know which drive has the bad blocks, which is why I was hoping to scan…
  • gderf -

    Replied to the thread Downloads not working for torrents.

    Post
    In your docker settings under Volumes and bind mounts you have this which uses an OMV defined shared folder: Host path = /sharedfolders/Downloads I would have it this way using the actual absolute path: Host path =…
  • itsmyst -

    Replied to the thread Downloads not working for torrents.

    Post
    Quote from gderf: “What hardware platform are you running on and which deluge docker are you using? ” I'm running this on an intel i5-750 socket LGA 1156 with a p55 motherboard (my old computer). I'm using linuxserver|deluge. Actually all of the…
  • geaves -

    Replied to the thread Windows 10 Creators failure to locate CIFS/SMB shares.

    Post
    I don't want to get at cross purposes, there is a difference between 'seeing' the available shares and accessing them, using File Explorer -> Network then in the address bar highlight network and enter \\ip address of omv (the \\ is important and must be…
  • mipi -

    Replied to the thread OMV 4.x Odroid HC2 ... or something else ... RockPro64 ,,,.

    Post
    Oggl, oggl ?( ... I understand maybe 33,79 % of your Text ... is your only point, that i've chosen the wrong power unit? Pls, be so kind show me the right one! No sarkassm, im not an Electrical engineer! Or is it consuming 0,1 watts too much? But in my…
  • Adoby -

    Replied to the thread OMV 4.x How to backup and restore OMV configuration ? BMR Plan - howto?.

    Post
    System backup: Clone USB thumb drive with OMV system to a spare USB thumb drive and to image stored on HDD. Scenario: USB thumb drive catastrophic failure. Corrective measure: Replace USB thumb drive with backup thumb drive. Reboot. Carry…
  • carriba -

    Replied to the thread Windows 10 Creators failure to locate CIFS/SMB shares.

    Post
    Yes, this is correct. Either using the IP address or the host name to access the OMV4 server does not work for Windows 10 Enterprise and for Windows 10 Professional. I'm just getting a pop-up window asking for authorisation, however with the right user…
  • marcsgirall -

    Replied to the thread OMV 4.x Virtualbox VNC Issue.

    Post
    Oh nice, thanks. So if I understand correctly I upload those packages to the plugin installer after having removed the existing virtualbox install?
  • marcsgirall -

    Liked ryecoaaron’s post in the thread OMV 4.x Virtualbox VNC Issue.

    Like (Post)
    Quote from marcsgirall: “So I’ve been trying to find the ConsoleImpl.cpp file to patch & I can’t for the life of me find it in the plugin version of VBox. ” As I posted in the other thread about this, I built the packages and put them here -
  • sergiu46 -

    Liked tkaiser’s post in the thread New approach for Raspberry Pi OMV images.

    Like (Post)
    One of the RPi Trading guys answered and explains the additional bits: github.com/raspberrypi/firmwar…ae#commitcomment-31620514 So the new behavior is documented at least there. To fix things occurrences of printf "%019d" should be replaced with printf
  • Rickboy333 -

    Replied to the thread OMV 4.x Read floppies directly from OMV.

    Post
    Quote from ryecoaaron: “Quote from Rickboy333: “But uhh is there a way I can directly read and write floppy disks via my fileserver? ” Sure but not via the OMV web interface. You would do it just like any other Linux box. Assuming the disk was…
  • Rickboy333 -

    Replied to the thread OMV 4.x Read floppies directly from OMV.

    Post
    Quote from ryecoaaron: “Quote from Rickboy333: “But uhh is there a way I can directly read and write floppy disks via my fileserver? ” Sure but not via the OMV web interface. You would do it just like any other Linux box. Assuming the disk was…
  • gderf -

    Replied to the thread OMV 4.x How to backup and restore OMV configuration ? BMR Plan - howto?.

    Post
    Quote from akurzawa: “How to backup OMV configuation to restore settings after disaster recvery? Case: OMV installation is destoyed, I've all the data on separate partition, I want to quickly install fresh OMV from DVD and restore config for network,…
  • gderf -

    Replied to the thread Downloads not working for torrents.

    Post
    Very nice job on the screenshots, all in one place. What hardware platform are you running on and which deluge docker are you using? In your Deluge Network settings you can not use random incoming ports. You must specify at least one port and that port…
  • akurzawa -

    Posted the thread OMV 4.x How to backup and restore OMV configuration ? BMR Plan - howto?.

    Thread
    How to backup OMV configuation to restore settings after disaster recvery? Case: OMV installation is destoyed, I've all the data on separate partition, I want to quickly install fresh OMV from DVD and restore config for network, shares etc. so I can get…
  • itsmyst -

    Replied to the thread Downloads not working for torrents.

    Post
    So you're definitely right that it's a permission's based problem. I went into the config folder for qbittorrent (thinking, hey, if it can write everything to here then why the hell can't it write to my download folder which I've setup the same way?) In…
  • tkaiser -

    Replied to the thread Rock64 in drawer “pc case”, heating problem?.

    Post
    Quote from Chrisjay: “But is it necessary? ” Most probably not. You can simply measure once the stuff arrived: Source Code (2 lines)The former will output SoC thermals and the latter HDD temps. I wouldn't be concerned if idle temperatures do not…
  • itsmyst -

    Replied to the thread Downloads not working for torrents.

    Post
    I may not be running an updated version of deluge as mine definitely doesn't look like that! imgur.com/a/VazqpiS Also I should mention that I've tried using both the relative and absolute paths when setting the download folder in deluge or qbittorrent.…