Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Nefertiti -

    Replied to the thread Pi-hole in doker network problem.

    Post
    OMV is using a static IP in the router Sent from my PH-1 using Tapatalk
  • geaves -

    Replied to the thread Pi-hole in doker network problem.

    Post
    Quote from Nefertiti: “I am stuck at the beginning as soon as I want to use the google DNS ” Does your OMV use DHCP or a static IP?
  • Quote from Tomte: “Thanks for the answer! It was an USB drive, I pulled it off. Not nice, but I did it. Is this really the problem? Do I need to find it, attach it, and then I can remove it? ” Yes!! Attach the drive, remove any shared folders…
  • Thanks for the answer! It was an USB drive, I pulled it off. Not nice, but I did it. Is this really the problem? Do I need to find it, attach it, and then I can remove it?
  • ricardoporto -

    Liked subzero79’s post in the thread OMV 3.x Resolved Some docker containers don't like it when fstab is noexec.

    Like (Post)
    Find the fstab entries you don't want with noexec in /etc/openmediavault/config.xml look at the mnent entries. Remove the noexec directive and run omv-mkconf fstab Reboot. If you want future attached disks the same you need to edit Omv environmental…
  • ricardoporto -

    Liked Roosey’s post in the thread OMV 3.x Resolved Some docker containers don't like it when fstab is noexec.

    Like (Post)
    This worked for me and my Plex docker transcode directory thanks!
  • ricardoporto -

    Liked antipiot’s post in the thread OMV 3.x Resolved Some docker containers don't like it when fstab is noexec.

    Like (Post)
    Wanted to report this is still usefull: Had to do this for my new Plex Docker container. Thanks :)
  • gderf -

    Posted the thread linuxserver.io/deluge.

    Thread
    Did anyone who had a working linuxserver.io/deluge docker find that it recently broke? Mine did and I had to roll back from Tag:latest to Tag:136 to get it working again. Edit: Seems to be a commonly seen problem:
  • Mr.Grape -

    Replied to the thread OMV 4.x RPi2 wont boot.

    Post
    This is not the first time I see situations where people confuse RPi versions ... One core was only in Pi A, B, A+, B+. If I am not wrong. People see "Raspberry Pi B+" and immediately think about "Raspberry Pi 2 B". My guess is that this is a mistaken…
  • klou -

    Posted the thread OMV 4.x Multiple ssh-agents spawned by rsync jobs.

    Thread
    I'm using Arakkis 4.1.11 on two systems -- and configured a few rsync jobs between them (and other machines). Rsync jobs are only configured on one of these, and they all use passwordless SSH with a Public Key Auth, so the Certificate is in the OMV…
  • Quote from Tomte: “where the hdd does not exist anymore. ” Can see the errors, how did you remove the drive?
  • geaves -

    Replied to the thread OMV 4.x Resolved Installation Problems.

    Post
    Quote from mgjsmith: “Thanks to everyone for their guidance. Problem is resolved and now I can enjoy what is proving to be an excellent NAS option. ” So what was the solution?
  • geaves -

    Replied to the thread OMV 3.x Cannot find device while creating a shared folder.

    Post
    Quote from liv913: “Do you know what criteria is used by OMV interface to choose the available devices from the list? ” Sorry no, but you have two issues there, one is the Pi itself (although I have 2, one is on constantly and the other when I need…
  • liv913 -

    Replied to the thread OMV 3.x Cannot find device while creating a shared folder.

    Post
    Quote from geaves: “Quote from liv: “and I configured hd-idle to spin down disk automatically when it's not used for 120 seconds... I don't know if this makes a difference. ” Hm!! well you know something I don't :) personally what I would do is to turn…
  • mgjsmith -

    Replied to the thread OMV 4.x Resolved Installation Problems.

    Post
    Quote from geaves: “Quote from mgjsmith: “I assume this is a BIOS Boot problem. Excuse my lack of expertise! ” How did you install? CD or from another USB. Put up your full m'board info, make model etc. ” I have successfully installed the OS onto…
  • .H. -

    Replied to the thread OMV 4.x install OMV on my NAS with usb Key.

    Post
    alright. since i install this my local network is not workin correctly ... ( i don't have any problem before... ) i use another wifi network for continue my installation. i had acrtivate SSL i have install plugin OMVextra install promox kernel and…
  • indragm -

    Posted the thread OMV 4.x Shared HDD suddenly goes missing.

    Thread
    Hi, I installer OMV on a raspberrypi and used 2 external, self-powered, HDD, 1TB each. Suddenly this morning I noticed I can't access 1 of my HDD. I can see it's listed under physical disk (/dev/sda), however, it's not detected in File System,…
  • ryecoaaron -

    Replied to the thread Monitor several OMV servers.

    Post
    Quote from Adoby: “Also it is not free and open source, even if you can run it for free on 7 nodes. Hm... ” Uh, nagios core is free and open source - github.com/NagiosEnterprises/nagioscore
  • strix -

    Replied to the thread Omv ladet webinterface nicht.

    Post
    sry war im Urlaub konnte da nicht schreiben. ne es geht mit keinem pc bzw browser . ich werde jetz mal alles neu aufsetzen. dauert ja nicht soo langen. danke für die hilfe
  • tkaiser -

    Replied to the thread Monitor several OMV servers.

    Post
    Quote from Adoby: “When the HC2s are under heavy utilization, sustained copying of GBs or even TBs, I worry about CPU and HDD temperatures ” My take on this: Test worst case conditions first, then never care again. The most interesting thing with HC2…