Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • elsmandino -

    Liked ryecoaaron’s post in the thread OMV 4.x Still trying to understand permissions - basic principles..

    Like (Post)
    Quote from elsmandino: “Would you mind explaining how I can find this out, please? ” Never used tvheadend. I would start by looking at the output of ps aux for something obvious.
  • uvo -

    Posted the thread OMV 4.x Fsarchiver made my disk temporarily read-only.

    Thread
    Hello, today I tried to do an backup of my system ssd with fsarchiver. I used my storage as destination and used ssh for the command. After about 500MB of data copied, the backup stoppped with this message: archwriter.c#212,archwriter_write_buffer():
  • elsmandino -

    Replied to the thread OMV 4.x Still trying to understand permissions - basic principles..

    Post
    I have had a bit of a further look at this and I am sort of very slowing getting this (I think). On my system, TVHeadend is known as hts. If I click on Access Rights Management and then on User, there is one user named - "alex" and in the group column…
  • FFrank -

    Replied to the thread OMV 4.x UrBackup - need to set shared folder new after reboot?!?.

    Post
    Quote from ryecoaaron: “Sounds like your drive(s) may not be ready when the urbackup service starts. So, it still thinks it isn't ready?? Just guessing. I don't use urbackup though. ” So if I wait a little all will be fine? I will try...but I do…
  • trapexit -

    Replied to the thread MergerFS pool becomes corrupted for an unknown reason.

    Post
    The recreation "fixing" the issue doesn't make sense. mergerfs doesn't interact with your data. It's a proxy / overlay. Could you provide the settings you're using? It's really not possible to comment further without such details. Are you using the…
  • reeneex -

    Replied to the thread OMV 4.x Unable to boot after installation (Dropping to a shell!).

    Post
    Good evening, I try to find a solution to my similar Problem. I followed te steps above, but cant use the commands as descriped. I tried -lah /dev/disk/by-id/ but no result. Can anyone Point me in the right Direktion or give me the commands i have to…
  • ryecoaaron -

    Replied to the thread Simplifying The OMV Configuration Backup and Restore Process.

    Post
    Quote from flmaxey: “WOL is more of a function of the power supply and motherboard, keeping the Ethernet interface running while the PC is shut down. This is a BIOS function - USB had nothing to do with this. (Note: In some BIOS versions, WOL must be…
  • ryecoaaron -

    Replied to the thread OMV 4.x Still trying to understand permissions - basic principles..

    Post
    Quote from elsmandino: “Would you mind explaining how I can find this out, please? ” Never used tvheadend. I would start by looking at the output of ps aux for something obvious.
  • ryecoaaron -

    Replied to the thread OMV 4.x Problem with omvextra repositories.

    Post
    Sounds like something isn't updated and you are still using the old packages. Purge docker-ce and openmediavault-docker-gui and delete /etc/default/docker. Then do an omv-aptclean. Then *just* install docker-ce with apt-get install docker-ce. Then…
  • tkaiser -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from Markess: “keep an eye on the error logs ” And there will be errors from time to time even if the server in question ran a memtest burn-in procedure for 48 or even 72 hours without showing a single bit flip. At least with our installations…
  • ryecoaaron -

    Replied to the thread OMV 4.x UrBackup - need to set shared folder new after reboot?!?.

    Post
    Sounds like your drive(s) may not be ready when the urbackup service starts. So, it still thinks it isn't ready?? Just guessing. I don't use urbackup though.
  • chrbar -

    Replied to the thread Turn on back my OMV 0.5.60... need advices to migrate to new server/release?.

    Post
    Thanks a lot raulfg3 and ryecoaaron. I'd mounted it manually and added it in fstab. I've rollbacked and mounted it via the Mount button from File System, and that run correctly! Thanks :) Now to finish I've to restore shares and accounts. Can I migrate…
  • flmaxey -

    Replied to the thread OMV 4.x Server shutting down randomly ... software or hardware issue?.

    Post
    How about a few answers. Quote from flmaxey: “Is it time related? (Which might, actually, be heat.) Is it a matter of hours, a matter of days? Does a restart fix it and for how long? ” Quote from flmaxey: “If you're convinced it's a software…
  • Sean Hind -

    Replied to the thread OMV, UnionFS, Snapraid.

    Post
    I have a similar setup, and a similar problem, all the data on one drive. did you find a setting that spread the data across the drives? what I'm looking for is either a setting that fills a drive and moves on to the next, or preferably one that…
  • FFrank -

    Replied to the thread OMV 4.x UrBackup - need to set shared folder new after reboot?!?.

    Post
    Quote from ryecoaaron: “Are you using the urbackup plugin or docker? Is the share you are using a local filesystem? If so, what kind and is it a usb drive? ” I am using the Plugin. The share is on internal HDDs (unionFS + Snapraid). All via…
  • KM0201 -

    Liked flmaxey’s post in the thread Simplifying The OMV Configuration Backup and Restore Process.

    Like (Post)
    Quote from Kai: “Does the USB 3.0 stick, when mounted in a rear panel 3.0 slot, still access RAM for the purpose of being able to put OMV4 into a Wake On LAN scenario? ” OMV will boot from a rear panel USB socket (were it won't be broken off). …
  • Markess -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from donh: “Will the cost of the upgrade be worth it? ecc used to be the only way to go but now not so much. ” Its important to keep your context in mind. ZFS with ECC was originally designed for, and many would argue works best in, enterprise…
  • elvincent -

    Replied to the thread OMV 4.x Server shutting down randomly ... software or hardware issue?.

    Post
    pass all the test and swapped out the power and just my luck still randomly crashes. Any suggestions which part to look at now? Or is there a log I can print out that someone smarter than me can see what the issue is?... thanks in advance
  • Agricola -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    I figured how to set my DNS server on my iPhone to my Rpi3's address but I still cannot set pihole DNS settings to unbound without blocking my iPhone from the internet on wifi. I am running a Tomato router and I have only the one pihole DNS server…
  • slb20 -

    Replied to the thread OMV 4.x Problem with omvextra repositories.

    Post
    if i install the docker-ce over the webgui i get the same PATH error as previous.. by insalling it over the cli i get following…