Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SnakeDoc -

    Replied to the thread OMV 3.x ZoneMinder OMV 3.x - Installation.

    Post
    I'm sorry but i don't understand where do you find the pull image of zoneminder ? Thanks a lot
  • molnart -

    Replied to the thread OMV 3.x Upgrade 3.x -> 4.x Upgrade from 3.0.88 to 4 - Any pitfalls?.

    Post
    is there any iso available for 4.x? i am tinkering with OMV in virtualbox for the past few weeks and i might just do it with 4.x already
  • FreshMike -

    Liked bugnotme’s post in the thread OMV 3.x Resolved kernel: [ 3724.848250] hpet1: lost 7161 rtc interrupts.

    Like (Post)
    I guess so. I have ASRock J4205 and got the same errors after installing wakealarms. My NAS wasn't able to wake up automatically. Solution (mythtv.org/wiki/ACPI_Wakeup#HPET_conflict): set the boot parameter hpet=disable Worked for me - the errors are…
  • gderf -

    Replied to the thread OMV 3.x Backup configuration.

    Post
    Clonezialla does not back up the configuration. It creates an bit for bit image of the whole operating system that can be restored later if needed. There are no configuration files that can be exported from one version of OMV and imported into a later…
  • Alexis Trinquet -

    Replied to the thread My first NAS Build.

    Post
    Hi everyone... so after a kind of long hiatus I've did several things: First of all I had to reinstall OMV again (for some reasons it would get stuck on raise network interfaces), for now it's running fine. I recently moved the NAS under my desk…
  • audi30tdi -

    Posted the thread OMV 3.x Backup configuration.

    Thread
    Hello! Is the only way of backup configuration to install Clonezilla?? Have a system running today With OMV 1.x and are setting up a New one With 3.x, do I have to set up everything manually like user, Groups, shared folders etc. Or is it a easier…
  • belierzz -

    Replied to the thread OMV 3.x Upgrade 3.x -> 4.x Upgrade from 3.0.88 to 4 - Any pitfalls?.

    Post
    Thanks a bunch ryecoaaron, seems you've fixed it already... Upgrade to arrakis went well and everything seems to work fine, only obstacle is an issue with enabling the docker ce repo in omvextrasorg 4.0.4.: In the error message I was asked to upgrade…
  • belierzz -

    Liked ryecoaaron’s post in the thread OMV 3.x Upgrade 3.x -> 4.x Upgrade from 3.0.88 to 4 - Any pitfalls?.

    Like (Post)
    There is no arrakis-ce-docker repo (just arrakis-docker). just remove that repo or remove the ce- from /etc/apt/sources.list.d/omv-extras-org.list. I will have to fix that later.
  • macom -

    Replied to the thread OMV 2.x Upgrade 2.x -> 3.x OMV 2 nach OMV3.

    Post
    zur Installation von Emby schau mal hier. Ab thread 424. Docker: findest du hier. Oder mal bei Wikipedia suchen. Ich würde aber an deiner Stelle Emby direkt installieren. Oder du wechselst auf Plexmediaserver. Dafür gibt es ein Plugin in OMV.
  • dinge -

    Posted the thread OMV 3.x Run Nzbget as an other User.

    Thread
    Hello, i installed with a guide a ovpn split tunneling, so the user vpn uses always the ovpn connection. Is there a way to run Nzbget as the vpn user?
  • mrperfektone -

    Posted the thread Cron.daily - Problems ?.

    Thread
    Hello, I have activated email notification and I receive this notification with the following error from openmediavault (Odroidxu4) on my mail: /etc/cron.daily/logrotate: error: stat of /var/log/netatalk.log failed: No such file or directory run-parts:…
  • lam640 -

    Posted the thread OMV 0.2 Upgrade 2.x -> 3.x error message from upgrade omv2 to omv3.

    Thread
    Shell-Script (10 lines)I have already upgrade from omv2 to omv3 but i cannot log in it.how can it solve it? thanks
  • fidoboulettes -

    Replied to the thread OMV 3.x Resolved active ssl connection into domoticz plugin.

    Post
    Thanks a lot for your answers...
  • tkaiser -

    Replied to the thread OMV 3.x Protocol "http" not supported or disabled in libcurl.

    Post
    Quote from markeagles4: “maybe some files are a little corrupt on install ” What's the output from the following running as root? Source Code (1 line)
  • ryecoaaron -

    Replied to the thread OMV 3.x [HELP!!] Can't boot my OMV3, Please HELP me! "can't request region for resource".

    Post
    The region error is really the problem (which will probably prevent a reinstall from working). Read this - bugzilla.redhat.com/show_bug.cgi?id=1394912 Looks like a combination of kernel bug/bios bug/bios setting issue. I would update the bios and…
  • ryecoaaron -

    Replied to the thread OMV 3.x Update Which Debian version will work with OMV3.

    Post
    Quote from audi30tdi: “"deb packages.openmediavault.org/Public Erasmus main" > /etc/apt/Sources.list.d/openmediavault.list ” erasmus and public should not be capitalized.
  • ryecoaaron -

    Replied to the thread OMV 3.x Duplicati not starting at boot.

    Post
    Sounds like it is waiting on storage? DId you try enabling the unit file again? systemctl enable duplicati
  • ryecoaaron -

    Replied to the thread OMV 3.x Resolved active ssl connection into domoticz plugin.

    Post
    Quote from fidoboulettes: “When I change the port configuration into this way: /opt/domoticz/domoticz.sh (example 443 --> 445), it don't works. ” The ssl port defaults to 8078. The next version of the plugin will allow you to change the port.
  • Ammiraglio -

    Replied to the thread OMV 2.x Resolved NUT settings for UPS Trust OXXTRON 1300VA.

    Post
    I have the same UPS and I couldn't figure out how to set it up, thanks for the info!