Recent Activities

  • Agricola -

    Replied to the thread OMV 4.x Setting up Rsync.

    Post
    At this point I am still not able to do anything with the hc1. Ssh returns port 22: Operation timed out, and the web gui isn't there for Plex or omv for two days now. Right now I just want to shut it down gracefully and start over with a clean install,…
  • miot -

    Posted the thread OMV 4.x rootfs full after rsync to 'sleeping' USB device?.

    Thread
    Hello, I am pretty new to OMV (had QNAP for years) and I am still in 'experiencing and testing' mode. Today I ran into a full rootfs after starting rsync to backup some data on an USB external HDD which is connected all the time to the NAS and mounted…
  • flmaxey -

    Replied to the thread The Class E Network.

    Post
    Quote from geaves: “Well reinstalled dietpi and this time installed Pi-hole from the software menu, added unbound and seems to be working Ok will leave this for a change over tomorrow. Will also have to get another SD card purely for backup…
  • gderf -

    Replied to the thread OMV 4.x Kimsufi dedicated server.

    Post
    The design of OMV requires a minimum of two "drives." One "drive" for the OMV system disk and one or more data "drives." Only data "drives" can be selected in the OMV GUI for shares, etc. When you installed Debian 9.4 was the result using the entire…
  • Kritta -

    Replied to the thread OMV 3.x NGINX Reverse proxy + vitual hosts.

    Post
    I'm trying to set up a reverse proxy so that subdomain.mydomain.com is redirected to another computer on my internal network. I have a router that directs external requests on port 80 and 443 to my OMV/Nextcloud server. This works fine. I have…
  • pwepwe973 -

    Replied to the thread OMV 4.x Resolved MyWebSQL : Unable to connect.

    Post
    Hello community, Excuse my bad english.I am French speaking. I have encountered the same problem for 4 days. I have tried all the previous procedures, reinstall the system.I am under omv 4, in ssh with "mysql -u root -p" I also connect but via MyWebSql…
  • chriz77 -

    Replied to the thread OMV 3.x ASUS XG-C100C with OMV.

    Post
    Hi, will this nic work with OMV4.x? Thx! Chris
  • Robby -

    Posted the thread OMV 4.x Kimsufi dedicated server.

    Thread
    Hello community, Excuse my bad english.I am French speaking. I have a dedicated server with a single hard drive of 500Gb. I installed Debian 9.4 thanks to the management interface of my dedicated then OMV with SSH. In OMV I can see my hard drive of 500Gb…
  • geaves -

    Replied to the thread Docker Plugin.

    Post
    Ok after the debug log output I just checked the watchtower log file: Source Code (9 lines)It appears that Heimdall has updated....so why the errors in the debug log. Also by adding --cleanup into Command under Extra Arguments watchtower will remove…
  • geaves -

    Replied to the thread OMV 4.x Schedule Watchtower Docker Cotainer in OMV GUI.

    Post
    Found the solution under extra arguments there is a an option Command in there you enter --cleanup --interval 21100 then once the container is running under the column Command you get /watchtower --cleanup --interval 21100
  • AlphaZev -

    Replied to the thread OMV 3.x OS Drive almost full due to Docker.

    Post
    Just want to say thank you for finding this and sharing it. I have 2 servers with 72GB SSD's for the OS's, and recently installed Resilio-Sync. The log files were over 68gb and maxed out my OS drives, not letting me access the webUI. I FTP'd in to the…
  • dant220 -

    Replied to the thread OMV 4.x "Missing" RAID filesystem.

    Post
    Seagate IronWolf 4TB 3.5 Internal NAS HDD SATA 6Gb/s (ST4000VN008) same issue here.
  • tlauvaidemnepo -

    Replied to the thread OMV 4.x Rsnapshot needs to much space on target.

    Post
    Hey, I experience exactly the same. The same configuration was working and after migration to OMV 4 (current version) the backup doesn*t create Hardlinks anymore. I compared some files from the current backup and the one before and although its the same…
  • TechnoDadLife -

    Replied to the thread Latest Docker plugin update.

    Post
    Quote from ryecoaaron: “Quote from TechnoDadLife: “For the future of docker, I found this: Cockpit ” I've been testing cockpit for months on my omv test VM. It doesn't seem to have any docker features that I can find. It is more for managing one…
  • macom -

    Replied to the thread OMV 4.x Unable to install plugins.

    Post
    I am sure you will enjoy OMV :thumbup:
  • satanas17 -

    Replied to the thread OMV 4.x Unable to install plugins.

    Post
    Quote from macom: “In case you want to try a different mirror: openmediavault.readthedocs.io/…pt.html?highlight=sources ” Hi, Thanks for advice...everything is good to collect...It's my first attempt with OMV and it,s for a friend who's not really…
  • satanas17 -

    Liked macom’s post in the thread OMV 4.x Unable to install plugins.

    Like (Post)
    In case you want to try a different mirror: openmediavault.readthedocs.io/…pt.html?highlight=sources
  • tylerism -

    Replied to the thread OMV 4.x Transmission-OpenVPN & Mullvad. Needs Helps !.

    Post
    I have also followed the guide and I have Mullvad VPN but hade to use to bridged mode to make it work with Plex and also disable IPV6. Under extra arguments I used this to disable ipv6. --sysctl net.ipv6.conf.all.disable_ipv6=0
  • geaves -

    Replied to the thread The Class E Network.

    Post
    Well reinstalled dietpi and this time installed Pi-hole from the software menu, added unbound and seems to be working Ok will leave this for a change over tomorrow. Will also have to get another SD card purely for backup purposes. I've got other issues…
  • lucserre -

    Replied to the thread Resolved web interface gone wrong.

    Post
    Indeed - id10t error. Disregard. Nothing to see here... (thanks...)