Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Agricola -

    Replied to the thread Nextcloud, your personal cloud server, GNU nano blank page.

    Post
    @Nefertiti I added the static ip in the network section just as shown, adjusted port forwarding ip address in router, restarted router, rebooted OMV, ran the docker command... and still got the same error message.
  • darkopi -

    Replied to the thread OMV 4.x Resolved OMV fails to start a web server.

    Post
    That is not problem. I was waiting 1 hour with no diference...same errors as in my first post
  • klunkerbus -

    Replied to the thread OMV 4.x disk unmounted alone.

    Post
    @Sylvania - how did this pan out for you? I've ran into the missing disk and unmounted disk twice now on my HC2 with a WD 4TB drive. Were you able to somewhat prove that messing with the disk properties was causing the problem?
  • sajjads24 -

    Replied to the thread OMV 4.x incorrect password for connect via putty !?.

    Post
    problem with etcher i am use Win32DiskImager-0.9.5-binary for install on sdcard so all things good ♥. Win32DiskImager-0.9.5-binary better than etcher.
  • sajjads24 -

    Liked macom’s post in the thread OMV 4.x incorrect password for connect via putty !?.

    Like (Post)
    Quote from syrusstk: “root password you set during the install ” That is the case when you install from an ISO. If you use an image, the credentials are given on the download page at SF: web interface: - username = admin - password =…
  • tinh_x7 -

    Replied to the thread OMV 4.x OMV keeps waking up a couple of seconds after going to suspend.

    Post
    Different motherboard, different settings. Refer to your motherboard manual.
  • disrupted -

    Liked henfri’s post in the thread OMV 2.x Nginx Connection failed.

    Like (Post)
    Hello, I have the same issue. I have changed the monit config to: Shell-Script (7 lines)(I changed the last line) I have no operational experience with this yet though. Greetings, Hendrik
  • tr3bjockey -

    Replied to the thread OMV 1.0 Motherboard suggestion for OMV with PLEX transcoding.

    Post
    Quote from TheLostSwede: “Just out of curiosity, have you had a look at Emby as an alternative to Plex? I found it to be a lot nicer to use, despite no native app support on my smart TV. ” I've heard a lot of good things about Emby. Would their be a…
  • Excellent thank you. I assume I simply need to name the shared folders the same to have them appear with all their data intact etc? As soon as the new boot disc arrives (doing an upgrade to an m.2 in a USB enclosure) I'll try that. Much appreciated.
  • geaves -

    Replied to the thread OMV 2.1 raid5 missing after blackout.

    Post
    You could try stopping it even though it says inactive then try reassembling it.....bit it's not showing 2 drives /dev/sd[bc] which could mean the raid is dead, which if it is your data's gone.
  • jollyrogr -

    Replied to the thread OMV 2.x Resolved SNAPRAID+AUFS Replacing disks.

    Post
    Whenever I have snapraid questions I find it's helpful to read the documentation on the snapraid website. I don't do things like disk replacement often enough to remember the procedure. To replace a data disk: snapraid.it/faq#repdatadisk
  • piratx -

    Replied to the thread OMV 2.x Resolved SNAPRAID+AUFS Replacing disks.

    Post
    Hello, I am replying to this old thread cause I tried to do the same thing (replacing an old drive with a new one). So basically my setup is as follows: SnapRAID with unionfilesystems on OMV 4.1.11 Arrakis 5 drives on right now named (not cool) but in…
  • geaves -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    Well done :thumbup: instead of a Raid 1 mirror use the drives as individual drives 1 x data and 1 x rsync and a possible a backup to a usb drive, so you're backing up the backup.
  • barney5 -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    Ich habe eine Festplatte des RAID1 in ein LinuxMint System eingebunden. Das war für einen Anfänger wie mich gar nicht so leicht. Jetzt habe ich wieder zugriff auf die Daten. Aber ich denke in Zukunft kommt kein RAID1 mehr für mich in Frage. Vielen…
  • TechnoDadLife -

    Replied to the thread OMV 4.x MPD Server Guide?.

    Post
    Take a look at this for an example. thebiggerguy/docker-pulseaudio-example
  • raulfg3 -

    Replied to the thread Resolved OMV 4.x Why should you use or not use dockers.

    Post
    sorry for alarm. I apologize.
  • marvelous -

    Posted the thread OMV 0.4 Permission woes Could not chdir to home directory Permission denied.

    Thread
    I have 2 users setup and working as expected but having problems adding more. I tried adding a fresh new user and added to the ssh group, when i login via ssh I get Source Code (1 line) as the user I can cd to /srv/dev-disk-by-id-md-name-server-0/ but…
  • Nefertiti -

    Replied to the thread Cannot access web gui on new OMV_4_Raspberry_Pi_2_3_3Plus.img install.

    Post
    Yes according to the pic tho is a nginx error
  • dziekon -

    Liked ryecoaaron’s post in the thread Resolved OMV 4.x Why should you use or not use dockers.

    Like (Post)
    Quote from dziekon: “Can you provide a link to that deprecation notice? It's an important news for all plugin developers and I couldn't find any place where votdev states that plugins are "no-go" since version 5. I assume you're talking about plugins…
  • dziekon -

    Replied to the thread Resolved OMV 4.x Why should you use or not use dockers.

    Post
    Quote from ryecoaaron: “Quote from dziekon: “Can you provide a link to that deprecation notice? It's an important news for all plugin developers and I couldn't find any place where votdev states that plugins are "no-go" since version 5. I assume…