Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • skyline1 -

    Replied to the thread OMV 4.x Error after install.

    Post
    I think I have found the cause of this problem When I updated it loaded the Linux 4.18.0 Kernel which was the default restart Kernel On the next restart I hit space on the boot screen to stop the timer and selected the 4.14.0 Kernel and booted…
  • cezargradianu -

    Replied to the thread New to OMV and Rasberry pi 3 b+.

    Post
    Got it to work. Thank you guys! Issue with the sharing. I’m doing the windows share and Mac share, but I created a user and went to set read and write on that user for the shared folders yet when I access the folder I can only read. Any ideas?
  • tr3bjockey -

    Replied to the thread OMV 1.0 Motherboard suggestion for OMV with PLEX transcoding.

    Post
    I saw this site that tells you if your motherboard is compatible with Debian. kmuto.jp/debian/hcl/ASUS/M5A99FX+PRO+R2.0 I check our motherboard and noticed that ASM1042 SuperSpeed USB Host Controller did not have a "yes" next to it. I do have a usb…
  • Enable SSH with Public Key Authentication (Securing remote webUI access to OMV) Intro This guide covers how to enable ssh access in omv with PKA, this will secure access to the text console to allow only the person who has the private key to access…
  • cruachan -

    Replied to the thread OMV 4.x MPD Server Guide?.

    Post
    Hi TechnoDadLife, Can I ask was it the same docker image (vimagick/mpd) that you were trying to setup or another one?. And if it was the same one did you get further than me (ie did you get the container to run but failed to get it configured correctly)…
  • tr3bjockey -

    Posted the thread OMV 4.x Flash Memory Plugin and Plex -.

    Thread
    I was thinking about using the flash memory plugin (since I temporarily use a 32gb SD card through usb 3.0) as my boot drive for OMV. I checked bintray.com/openmediavault-plu…iavault-flashmemory/view# There is no documentation on the readme or the…
  • jollyrogr -

    Replied to the thread OMV 4.x How to partition data disks.

    Post
    why raid 1? I would recommend using an automated rsync backup or something along those lines.
  • booga -

    Posted the thread OMV 4.x Create iptables rules in CLI.

    Thread
    Hello :) , I'm going to make my server available from the outside. I would like to use iptables for more security. However, I don't want to use the graphical interface because I already have my own set of rules. Is that possible? I thought I would carry…
  • jcd -

    Replied to the thread How to replace default network interface with macvlan?.

    Post
    I haven't given up yet! I think my configuration script above was wrong and couldn't work at all. In the help I found this example: openmediavault.readthedocs.io/en/latest/various/advset.html. I also made some progress with the macvlan topic. With the…
  • gderf -

    Replied to the thread Transcoding failure Plex - Docker.

    Post
    Quote from NoobNoob: “I moved the /config docker directories to my SSD and now it works. They were on my Raid5 file system which had the 'noexec' option in /etc/fstab. Thank you, you're the best! ” Just be aware that the PMS database can become…
  • NoobNoob -

    Replied to the thread Transcoding failure Plex - Docker.

    Post
    I moved the /config docker directories to my SSD and now it works. They were on my Raid5 file system which had the 'noexec' option in /etc/fstab. Thank you, you're the best!
  • NoobNoob -

    Liked gderf’s post in the thread Transcoding failure Plex - Docker.

    Like (Post)
    What hard drive holds your PMS database (the one where the /config docker path points to)? Is that drive mounted with the exec option in /etc/ftsab?
  • macom -

    Replied to the thread OMV 4.x How to partition data disks.

    Post
    Quote from schindi77: “When partitioning the disk using parted or fdisk the webinterface seems to not recognize the partitions. ” After creating the partitions with geparted, have you created file systems on them? You can do this in OMV GUI and then…
  • macom -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    Quote from barney5: “Es wird erkannt aber einhängen geht nicht. ” Das heißt, unter Dateisystem kannst du es nicht auswählen und mounten?
  • syrusstk -

    Replied to the thread OMV 4.x How to partition data disks.

    Post
    Make a stick with Gpart and partition your disk and than load it up into omv gparted.org/
  • schindi77 -

    Posted the thread OMV 4.x How to partition data disks.

    Thread
    Hello! I´m building a NAS using 2 2TB HDD in Raid 1 Mode. One purpose of the NAS is to act as storage server vor a security cam. This cam is known to have problems with partitions bigger than 250gb. Because of this I need to partition the discs to 1…
  • tr3bjockey -

    Replied to the thread OMV 4.x docker not working properly.

    Post
    Ok...so I figured out plex. In case it helps everyone, I plugged in a usb drive with 2 partitions. Only one was listed as mounted. So I mounted the other. Then I went into plex client and was able to see the partition. I'm use to windows that when…
  • canadavault -

    Replied to the thread New to OMV and Linux.

    Post
    Quote from Adoby: “Quote from canadavault: “Quote from Adoby: “I remove my flash memory (SD-cards) and create a image files of them. ” Could you enlighten us like me how to do it in detail? :D ” Sure, but it is a bit of a stupid brute force hack. But,…
  • canadavault -

    Liked macom’s post in the thread New to OMV and Linux.

    Like (Post)
    Quote from canadavault: “Could you enlighten us like me how to do it in detail? ” On windows you can use Win32Diskimager.