Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • geaves -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    What's the output of the following cat / proc / mdstat [/ tt] [tt] blkid [/ tt] [tt] cat /etc/mdadm/mdadm.conf [tt] mdadm --detail --scan --verbose [/ tt]
  • sNiXx -

    Replied to the thread OMV 4.x How to upgrade Sonarr from Docker?.

    Post
    Quote from gammarayburst: “I found a way to have it automatically cleanup stale images. I added a daily scheduled job through the OMV interface with the following command: docker images -q --filter "dangling=true" | xargs -n1 -r docker rmi Seems to…
  • R0vsvamp -

    Posted the thread OMV 4.x Transcode folder for plex docker..

    Thread
    Hi i'm trying to set up my plex on Docker, with the toturial from " Techno Dad Life " Video link . He skips the part with the transcode folder, and in the comment he says: "Just make a transcode folder in your AppData folder. You will be very…
  • barney5 -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    gar nichts: Source Code (2 lines)in der Weboberfläche wird mir das RAID angezeigt.
  • geaves -

    Replied to the thread Raid degraded, cannot add disk.

    Post
    First you need to stop the array mdadm --stop /dev/md127 then mdadm --assemble --verbose --force /dev/md127 /dev/sd[abcd] then cat /proc/mdstat then cat /etc/mdadm/mdadm.conf
  • geaves -

    Replied to the thread Issues copying files from Windows share.

    Post
    Quote from BorgHead: “suspect that this has to do with encoding (UTF16 V vs. UTF8?) ” Highly probable, there are some on line conversion tools will this work, don't know, make a copy of one and try. Can be done in windows using powershell and in can be…
  • topi -

    Liked geaves’s post in the thread OMV 4.x digikam and mysql.

    Like (Post)
    Quote from uwe_harz: “that i have done too, but when i try to connect with the win64 version of digikam, the connection has no function and it get an error... could it be better to try the 32 bit version of digikam? best regards uwe ” I don't know…
  • Jieta25460 -

    Replied to the thread OMV 3.x Root login issue.

    Post
    Thank you I Make a mistake when I created an other root account ... I had it in root group whereas it must be in sudo group. I tried your commands on the server (there is a problem with ssh connection (acces denied) but in local it work. You will find…
  • ananas -

    Replied to the thread OMV 4.x Upgrade 3.x -> 4.x Missing file system after upgrade from 3.x to 4.x.

    Post
    Hi there, if the array is recognized, then the ZFS signatures on the member disks can not be the issue. How about the signatures on the software raid ? What is the output of "wipefs -n /dev/md127" ? Cheers, Thomas
  • geaves -

    Replied to the thread OMV 2.x Update Reed Error bei Erststart nach Neuinstallation..

    Post
    Quote from RuPo3: “the message "Read Error" comes instead of the first start! ” That's a hard drive, ssd, sd card, usb error....failed to read from the boot device.
  • ananas -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    Hallöle, wenn dein RAID (/dev/md127) erkannt wird, dann liegt das Problem nicht an ZFS-Signaturen auf den einzelnen Platten, sondern an evtl. vorhandenen ZFS-Signaturen auf dem RAID Device. Was kommt raus bei: wipefs -n /dev/md127 Gruß, Thomas
  • RuPo3 -

    Posted the thread OMV 2.x Update Reed Error bei Erststart nach Neuinstallation..

    Thread
    Hallo Forum! Benötige wieder einmal Rat von den Profis. Habe das aktuelle OMV 64 bit installiert. nach einer anscheinend problemlosen Installation (mehrmals ) kommt anstatt Erststart die Meldung "Read Error" ! Welche Ursache ? DANKE für Tipps RuPo3 ?(
  • ryecoaaron -

    Replied to the thread OMV 4.x can't install plugins or updates on OMV 413-1 - no disk monitor available.

    Post
    Quote from hyperg: “does not change the issue, same error message... ” It is a networking problem then since it still can't resolve dns. Does the system resolve dns when it is set to dhcp?
  • ryecoaaron -

    Replied to the thread Rsnapshot dir changed on update from OMV3 to 4.

    Post
    Quote from Aiakos: “Okay, I will reanable the plugin and in future I will check the file after any updates I perform and any changes I make in the plugins config... ” It would be interesting to see how it changes. While I'm not sure I can do…
  • ryecoaaron -

    Replied to the thread OMV 3.x Root login issue.

    Post
    Quote from Jieta25460: “I know used a desktop environment on the box isn't recommended but it's simpliest for me to do like this. This is the output of command lines. ” It was confusing whether you were posting the output from the client or the…
  • sjdaniels -

    Replied to the thread OMV 4.x Resolved Use Entire 500GB SSD / GPARTED Causes BUS ERROR.

    Post
    I manually ran an FSCK on the drive and all is well.
  • b1tl0rd -

    Liked raulfg3’s post in the thread [How to] Install MLDonkey/mlnet in the Docker Plugin.

    Like (Post)
    MLDonkey is a old but good way to download ed2k: links, I write a HOWTO install MLDonkey on a plain OMV install, but this time on OMV4 I'll try a diferent aproach and describe How To Install a MLDonkey container on DockerGUI. First some recomended…
  • barney5 -

    Replied to the thread OMV 4.x Raid1 nach Upgrade (omv 3 --> omv 4) nicht mehr einbindbar.

    Post
    Kann mir jemand helfen wie ich dass über das CLI hinbekomme?
  • Aiakos -

    Replied to the thread Rsnapshot dir changed on update from OMV3 to 4.

    Post
    Okay, I will reanable the plugin and in future I will check the file after any updates I perform and any changes I make in the plugins config...
  • hoppel118 -

    Replied to the thread OMV 4.x How Rebuilt my old ZFS Pool.

    Post
    Yes, it seems so...