Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • flmaxey -

    Replied to the thread Simplifying The OMV Configuration Backup and Restore Process.

    Post
    Quote from ryecoaaron: “But waking up a system with WOL requires the system to be sleeping first ” WOL support doesn't require the OS to be in a sleep mode. It requires BIOS and motherboard support. The vast majority of current systems that support…
  • beatledog -

    Replied to the thread OMV 4.x OMV 4.x.x installtion hanging.

    Post
    Additional info. Forcing a UEFI boot from the SSD gives me a string of "no arrays" messages and fails to find some files it needs; Finally, the system drops to a shell. At this point I can do nothing since my keyboard is not being recognized.
  • slb20 -

    Replied to the thread OMV 4.x Problem with omvextra repositories.

    Post
    i got the same message as on #27
  • beatledog -

    Posted the thread OMV 4.x OMV 4.x.x installtion hanging.

    Thread
    Hello, brand new user here. I'm trying to install from USB onto an SSD. Everything seems to work, but the process hangs at "complete the installation" and says it will reboot into the new OS. I remove the thumb drive, hit Enter, and the system churns…
  • ryecoaaron -

    Replied to the thread OMV 4.x Still trying to understand permissions - basic principles..

    Post
    Quote from elsmandino: “What is the significance of this? ” Nothing really since that is your user. If the user TVHeadend runs as is named hts, it is probably a system user which means it won't show up in the web interface. What is output of: groups
  • beatledog -

    Wrote a comment on beatledog’s wall.

    Wall Comment
    Just trying to install OMV 4.x.x for the first time...
  • Jurstud -

    Posted the thread Orange pi 3 or Nanopi M4?.

    Thread
    Hi. Today I am running OMV on a RPi 3b+, with two external USB3 cases (external supply). I like the idea, but petformance is crappy. I need a board with Gbe and USB3 (att least two ports). I am thinking of Nanopi M4 or the lately released Orange pi 3…
  • flmaxey -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    When it comes to IPhones - you're the Mac man. :) I can't help you there. Quote from Agricola: “I read somewhere that the DNS should be set in the LAN section of the router and NOT the WAN section. I don't seem to be able to find a place under the LAN…
  • Peach1200 -

    Replied to the thread Network connection drops while transferring files to OMV.

    Post
    Quote from geaves: “Quote from Peach1200: “What should I trust in this case? ” You would be adding a trust relationship of your omv server on webroot, or it could be something to do with file types, what I think it's doing is scanning them whilst…
  • elsmandino -

    Liked ryecoaaron’s post in the thread OMV 4.x Still trying to understand permissions - basic principles..

    Like (Post)
    Quote from elsmandino: “Would you mind explaining how I can find this out, please? ” Never used tvheadend. I would start by looking at the output of ps aux for something obvious.
  • uvo -

    Posted the thread OMV 4.x Fsarchiver made my disk temporarily read-only.

    Thread
    Hello, today I tried to do an backup of my system ssd with fsarchiver. I used my storage as destination and used ssh for the command. After about 500MB of data copied, the backup stoppped with this message: archwriter.c#212,archwriter_write_buffer():
  • elsmandino -

    Replied to the thread OMV 4.x Still trying to understand permissions - basic principles..

    Post
    I have had a bit of a further look at this and I am sort of very slowing getting this (I think). On my system, TVHeadend is known as hts. If I click on Access Rights Management and then on User, there is one user named - "alex" and in the group column…
  • FFrank -

    Replied to the thread OMV 4.x UrBackup - need to set shared folder new after reboot?!?.

    Post
    Quote from ryecoaaron: “Sounds like your drive(s) may not be ready when the urbackup service starts. So, it still thinks it isn't ready?? Just guessing. I don't use urbackup though. ” So if I wait a little all will be fine? I will try...but I do…
  • trapexit -

    Replied to the thread MergerFS pool becomes corrupted for an unknown reason.

    Post
    The recreation "fixing" the issue doesn't make sense. mergerfs doesn't interact with your data. It's a proxy / overlay. Could you provide the settings you're using? It's really not possible to comment further without such details. Are you using the…
  • reeneex -

    Replied to the thread OMV 4.x Unable to boot after installation (Dropping to a shell!).

    Post
    Good evening, I try to find a solution to my similar Problem. I followed te steps above, but cant use the commands as descriped. I tried -lah /dev/disk/by-id/ but no result. Can anyone Point me in the right Direktion or give me the commands i have to…
  • ryecoaaron -

    Replied to the thread Simplifying The OMV Configuration Backup and Restore Process.

    Post
    Quote from flmaxey: “WOL is more of a function of the power supply and motherboard, keeping the Ethernet interface running while the PC is shut down. This is a BIOS function - USB had nothing to do with this. (Note: In some BIOS versions, WOL must be…
  • ryecoaaron -

    Replied to the thread OMV 4.x Still trying to understand permissions - basic principles..

    Post
    Quote from elsmandino: “Would you mind explaining how I can find this out, please? ” Never used tvheadend. I would start by looking at the output of ps aux for something obvious.
  • ryecoaaron -

    Replied to the thread OMV 4.x Problem with omvextra repositories.

    Post
    Sounds like something isn't updated and you are still using the old packages. Purge docker-ce and openmediavault-docker-gui and delete /etc/default/docker. Then do an omv-aptclean. Then *just* install docker-ce with apt-get install docker-ce. Then…
  • tkaiser -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from Markess: “keep an eye on the error logs ” And there will be errors from time to time even if the server in question ran a memtest burn-in procedure for 48 or even 72 hours without showing a single bit flip. At least with our installations…
  • ryecoaaron -

    Replied to the thread OMV 4.x UrBackup - need to set shared folder new after reboot?!?.

    Post
    Sounds like your drive(s) may not be ready when the urbackup service starts. So, it still thinks it isn't ready?? Just guessing. I don't use urbackup though.