Recent Activities

  • flmaxey -

    Replied to the thread OMV 4.x Server shutting down randomly ... software or hardware issue?.

    Post
    How about a few answers. Quote from flmaxey: “Is it time related? (Which might, actually, be heat.) Is it a matter of hours, a matter of days? Does a restart fix it and for how long? ” Quote from flmaxey: “If you're convinced it's a software…
  • Sean Hind -

    Replied to the thread OMV, UnionFS, Snapraid.

    Post
    I have a similar setup, and a similar problem, all the data on one drive. did you find a setting that spread the data across the drives? what I'm looking for is either a setting that fills a drive and moves on to the next, or preferably one that…
  • FFrank -

    Replied to the thread OMV 4.x UrBackup - need to set shared folder new after reboot?!?.

    Post
    Quote from ryecoaaron: “Are you using the urbackup plugin or docker? Is the share you are using a local filesystem? If so, what kind and is it a usb drive? ” I am using the Plugin. The share is on internal HDDs (unionFS + Snapraid). All via…
  • KM0201 -

    Liked flmaxey’s post in the thread Simplifying The OMV Configuration Backup and Restore Process.

    Like (Post)
    Quote from Kai: “Does the USB 3.0 stick, when mounted in a rear panel 3.0 slot, still access RAM for the purpose of being able to put OMV4 into a Wake On LAN scenario? ” OMV will boot from a rear panel USB socket (were it won't be broken off). …
  • Markess -

    Replied to the thread OMV 4.x Replacing Non-ECC with ECC.

    Post
    Quote from donh: “Will the cost of the upgrade be worth it? ecc used to be the only way to go but now not so much. ” Its important to keep your context in mind. ZFS with ECC was originally designed for, and many would argue works best in, enterprise…
  • elvincent -

    Replied to the thread OMV 4.x Server shutting down randomly ... software or hardware issue?.

    Post
    pass all the test and swapped out the power and just my luck still randomly crashes. Any suggestions which part to look at now? Or is there a log I can print out that someone smarter than me can see what the issue is?... thanks in advance
  • Agricola -

    Replied to the thread OMV 4.x Questions concerning [How To] Install Pi-Hole in Docker.

    Post
    I figured how to set my DNS server on my iPhone to my Rpi3's address but I still cannot set pihole DNS settings to unbound without blocking my iPhone from the internet on wifi. I am running a Tomato router and I have only the one pihole DNS server…
  • slb20 -

    Replied to the thread OMV 4.x Problem with omvextra repositories.

    Post
    if i install the docker-ce over the webgui i get the same PATH error as previous.. by insalling it over the cli i get following…
  • tkaiser -

    Replied to the thread OMV 4.x Resolved installing omv 4 on odroid-xu4 fails.

    Post
    Quote from Robbin: “Actually I suffer from similar errors on other actions in GUI, for example when I try to enable User home directory ” Hmm... not related to eMMC or XU4 (thread title) so I would suggest opening a new thread with this...
  • reeneex -

    Replied to the thread OMV wont show up / es zeigt sich nicht.

    Post
    Sdb1 steht nirgends. Ich hab noch größere Screenshots gemacht. Ganz ehrlich ist mir auch nicht klar welche Befehlszeile notwendig ist. Unter grub hab ich noch nicht gearbeitet.4f2039a6253211204833cf93af69abf8.jpgf55d6f7bc27e8616ee5bd446bdadf2b2.jpg
  • Robbin -

    Replied to the thread OMV 4.x Resolved installing omv 4 on odroid-xu4 fails.

    Post
    Quote from tkaiser: “Yes, how does the output of cat /proc/partitions or even better armbianmonotor -u looks like? ” Source Code (18 lines) armbianmonotor -u ix.io/1yY2 So there was a partition, thanks: Source Code (21 lines) However now I can't mount…
  • flmaxey -

    Replied to the thread Simplifying The OMV Configuration Backup and Restore Process.

    Post
    Quote from Kai: “Does the USB 3.0 stick, when mounted in a rear panel 3.0 slot, still access RAM for the purpose of being able to put OMV4 into a Wake On LAN scenario? ” OMV will boot from a rear panel USB socket (were it won't be broken off). …
  • macom -

    Replied to the thread OMV wont show up / es zeigt sich nicht.

    Post
    Habe etwas Probleme die Bilder richtig zu sehen. Wenn da sdb1 steht, ändere es in sda1
  • macom -

    Replied to the thread OMV 4.x Festplatte läßt sich nicht aushängen/unmounten.

    Post
    Quote from merkur: “Sicherung unter System --> Sicherung ” Gibt es bei mir nicht. Ich habe aber auch das backup plugin nicht installiert. Vermute aber schon, dass es das ist. Quote from merkur: “Ich hätte nicht gedacht das es so umständlich…
  • reeneex -

    Replied to the thread OMV wont show up / es zeigt sich nicht.

    Post
    Das wollte ich. Mir ist allerdings nicht klar WAS ich da eintippen muss. Die Screenshots oben sind die Anzeigen in Reihenfolge. Auch weiß ich nicht ob sdb1 und sda1 für mich zutreffen. Kann das zumindest auf dem Screenshot nicht finden.
  • macom -

    Replied to the thread OMV wont show up / es zeigt sich nicht.

    Post
    Have you tried this first to see if that is your issue? "As he later wrote the one time solution to continue the system booting was to press ESC at the grub booting screen and e to edit the wrong sdb1 entry into sda1. Then the boot continues as it…
  • dcovach -

    Posted the thread OMV 4.x Virtualbox no mouse or keyboard.

    Thread
    OMV is successfully installed along with the virtualbox plug in. After creating a new Windows 7 VM, I get no mouse or keyboard access. I can see the windows 7 installation starting up in the preview window but I do not get a response when I click the…
  • elsmandino -

    Replied to the thread OMV 4.x Still trying to understand permissions - basic principles..

    Post
    Thanks rycoaaron - it is very encouraging that if even you don't ever use ACLs, then I should certainly be staying away from them. With that out of the equation, understanding permissions will hopefully be a bit clearer. Quote from ryecoaaron:…
  • elsmandino -

    Liked ryecoaaron’s post in the thread OMV 4.x Still trying to understand permissions - basic principles..

    Like (Post)
    Quote from elsmandino: “I really just do not understand how permissions and ACL work together. ” That is because ACLs are terrible. Quote from elsmandino: “What type of permission would I give to the "Recordings" folder, from the dropdown…