Recent Activities

  • geaves -

    Replied to the thread OMV 4.x How to save grub configuration..

    Post
    I'm sorry I'm at a loss, that's not creating the config file necessary, the last time I encountered something like this was during my first set up, so I just started again.
  • aniel -

    Replied to the thread OMV 4.x how do u ping a hdd so it can be removed and i know which one to unplug.

    Post
    yes i mean blink the drive light, as for the management software where do i find that since i do have and using the sas controller. my mob is: b2b.gigabyte.com/Server-Motherboard/GA-7TESM-rev-10#sp
  • aniel -

    Posted the thread OMV 4.x mergerfs hdd removal question.

    Thread
    when you remove a hdd out of the mergerfs pool does it move all files/ folders in that hdd to the other hdds ?
  • flmaxey -

    Replied to the thread OMV 4.x how do u ping a hdd so it can be removed and i know which one to unplug.

    Post
    If you have a sas controller, management software for the controller might do it (if you mean blink the drive light). In OMV, under storage Physical Disks, you'll find the HD model number and serial number, matched to the device name /dev/sd?. Drive…
  • omarius -

    Posted the thread Crashing.

    Thread
    Hi, i'm running OMV on my rock64 (2gb) variant, with the propper psu, a 16gb microsd class 10. I currently use is as a Nas & a plex media server, but it keeps crashing every other day, and that is without using it as a plex server, I have a rpi running…
  • samukets -

    Replied to the thread OMV 4.x Resolved Sonarr Permission Issue.

    Post
    Solved, the problem was in mapping the folders, even the transmission creating the complete subfolder, we should not point it in the docker. Before: / sharedfolders / downloads / complete / ... / downloads After: / sharedfolders / downloads / ... /…
  • aniel -

    Posted the thread OMV 4.x how do u ping a hdd so it can be removed and i know which one to unplug.

    Thread
    i have a supermicro 3u case with hot swappable hdd bays and i would like to know if is is possible to ping a hdd in omv so i can know which one to unplug and replaced, etc, thank you
  • Spyrious -

    Replied to the thread OMV 4.x How to save grub configuration..

    Post
    Done everything,but when I hit apply I get this Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; omv-mkconf shellinabox 2>&1' with exit code '2':…
  • vbalazs -

    Replied to the thread I cant share a port via Iptabless (Firewall).

    Post
    Now I got solved the error, but the port forwarding still not working. How should I add port to the firewall rules? Please someone.
  • Spyrious -

    Replied to the thread OMV 4.x How to save grub configuration..

    Post
    root@openmedivault:~# dpkg -l | grep shellinabox ii shellinabox 2.20+b1 amd64 publish command line shell thr ough AJAX interface root@openmedivault:~# systemctl status…
  • geaves -

    Replied to the thread OMV 4.x How to save grub configuration..

    Post
    dpkg -l | grep shellinabox should show that it's been removed. Refresh OMV's GUI and shellinabox should not be there. BTW have you done the grub update and rebooted? I'm wondering if this might be impacting the problem. If you've done the above install…
  • Spyrious -

    Replied to the thread OMV 4.x How to save grub configuration..

    Post
    Ok I ran these commands. apt-get remove --purge openmediavault-shellinabox apt-get clean apt-get update Now,what do I do? Thanks!!!
  • goatmax -

    Replied to the thread pcie video card.

    Post
    Interesting, it is a Gigabyte board, never had this issue before now tho. Would try the f1 button trick, but I've just slung it all back down in the basement - so it's case closed now, at least for the time being!
  • badda -

    Replied to the thread OMV 4.x Headless, automated backup of the system SD-card on RPi.

    Post
    Thanks for the feedback. So I guess, I'm not all wrong doing the backup my way :) Good advice with zeroing the unused space - although that is taken care of by pishrink.sh afterwards if I'm not mistaken. Compression on the fly is out of the question with…
  • geaves -

    Replied to the thread The Class E Network.

    Post
    Quote from flmaxey: “Some mobo's have 5 pin headers for RGB light strips, ” I just googled that and there was a listing "Pimp your PC" this could get silly, so if you're thinking of wearing spandex whilst pimping your pc, I should keep it quiet :rolleyes:
  • flmaxey -

    Replied to the thread The Class E Network.

    Post
    Quote from geaves: “ :D :D discomaxey 'he can light up your server' forum.openmediavault.org/index…13ef1568936daf363941d48c7 ” Ha - Ha - Ha... (accompanied with a S-L-O-W clap). Actually I was wrong. Some mobo's have 5 pin headers for RGB light strips,…
  • badda -

    Liked tkaiser’s post in the thread OMV 4.x Headless, automated backup of the system SD-card on RPi.

    Like (Post)
    Quote from badda: “Source Code (1 line)” The problem with this attempt (or any use of dd or other tools running below the filesystem layer) is that the created image will most probably contain a lot of junk due to the way filesystems implement…
  • Njuilpo -

    Liked tkaiser’s post in the thread OMV 3.x Resolved [SOLVED] Disks do not spin down automatically.

    Like (Post)
    If there's disk activity waking up sleeping disks you already found the reason why they do not spin down (since not idle). So it's time to get a clue which processes are doing IO. I would use iosnoop for this...
  • guzzisti -

    Replied to the thread OMV 4.x SSH login issues.

    Post
    Could you specify what "no luck" means? Can you connect to the server, but the credentials are rejected? For user access to ssh, the user needs to be a member of the "ssh" group. Be aware that the root password is different from the admin passwort for…
  • macom -

    Replied to the thread OMV 4.x SSH login issues.

    Post
    Quote from sharpting: “I had a look at the ssh_config file and noticed there was no line 'PermitRootLogin' so added that with a yes ” After that you need to reboot or service ssh restart Better option: enable root login in the gui of OMV in the SSH…