Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • ajaja -

    Replied to the thread OMV 3.x (stable) looking for Plex alternative.

    Post
    Quote from flmaxey: “ …there's advice on the form for relocating metadata storage to a data drive. ” Where might I find the advice? I set my Database Volume and Folder in OMV's PLEX setup to be: /srv/store/plexmediaserver/, yet PLEX stores nearly…
  • Bert105 Bertolt11 -

    Posted the thread Virtualbox for Omv3 doesn't work.

    Thread
    Hello, I have a fresh installed omv 3 but my virtualbox doesn't want to work. I have 2 Errors: Error 1: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; omv-mkconf virtualbox 2>&1' with…
  • drewgost -

    Replied to the thread OMV 0.3 Upgrade 3.x -> 4.x Upgrade 2-3.

    Post
    Thanks macom I decided to go with 3.0.94 Erasmus new install, it went flawless and I did follow your thoughts on removing all data drives first. Next step will be to move on to 4.0 or maybe stick with this for awhile.
  • moreje -

    Posted the thread OMV 4.x (testing) remote_mounts permissions problem.

    Thread
    Hello, I successfully added a SMB share using remote_mounts plugin, but I get permission issues only root can write in the mount point normal users can't I can't change (using ACL/privileges) access rights.... how can I fix that? do I need to have same…
  • Barracuda -

    Replied to the thread OMV 3.x (stable) no access to File Systems.

    Post
    Here are the outputs: Source Code (11 lines)Source Code (5 lines)
  • RainerUwe -

    Replied to the thread OMV 3.x (stable) Autoshutdown and TVHeadend SleepScript wont work.

    Post
    @Huberer Thank you! Somehow the dvbsky-sleep.service wasn't staring at boot, but maybe I will have to search for any old scripts in /pm/.. Anyway when I start the service manual with systemctl status dvbsky-sleep.service everything is working! :) Thank…
  • jollyrogr -

    Replied to the thread OMV 3.x (stable) no access to File Systems.

    Post
    If you are running 4.9 kernel that should be good i would think... I'm probably wrong but I was thinking the default kernel for omv3 was 3.16, but maybe that was the default debian jessie kernel since I installed jessie, then omv on top of it. …
  • gabs247 -

    Replied to the thread OMV 3.x (stable) Docker Plugin Error Setting New Base Path.

    Post
    Ok, so what's the best way to do this then, as I want to try to set up some Docker Containers but I won't have enough space on my OS drive? Is it good practice to remove the noexec flag on my data drives? Thanks
  • Ralms -

    Replied to the thread OMV 3.x (stable) Is Plex plugin abandoned?.

    Post
    Quote from gderf: “Plex is being kept current on OMV 4.x amd64. I am not sure what is happening on OMV 3.x. Current build in the repo is 1.10.1.4602 which is what is also currently being provided by Plex.tv. The current beta version (PlexPass) is…
  • Valsi -

    Replied to the thread Which energy efficient ARM platform to choose?.

    Post
    Hi, have ordered last week following parts: ODROID-HC1 : Home Cloud One plus 6A powersupply and other parts from Hardkernel for having a complete home Server. Additionally 1TB Seagate BarraCuda 2,5'' So I'm looking forward to see the improvement to my…
  • gabs247 -

    Replied to the thread OMV 3.x (stable) Docker Plugin Error Setting New Base Path.

    Post
    Quote from subzero79: “I believe your issue might be that the drive has noexec flag. Is it ext4? If you need to change the noexec flag permanently go to the wiki in my signature you can information on how to change this correctly” PRobably, I'll…
  • subzero79 -

    Replied to the thread OMV 3.x (stable) Docker Plugin Error Setting New Base Path.

    Post
    I believe your issue might be that the drive has noexec flag. Is it ext4? If you need to change the noexec flag permanently go to the wiki in my signature you can information on how to change this correctly
  • gabs247 -

    Replied to the thread OMV 3.x (stable) Docker Plugin Error Setting New Base Path.

    Post
    Ok, first stupid mistake fixed...I should have known that you just need to use the --reinstall flag to get it to reinstall the missing lib files: Source Code (1 line)Just need to figure out the docker problem somehow...
  • gabs247 -

    Replied to the thread OMV 3.x (stable) Docker Plugin Error Setting New Base Path.

    Post
    Good news (NOT) in trying to remove the /var/lib/docker folder so that I could symlink it to another location as specified here: Move Docker Base location issues I've now accidentally (IDIOT) deleted my /var/lib/openmediavault folder! Please tell me…
  • votdev -

    Replied to the thread OMV 4.x (testing) Import existing RAID1 to filesystems.

    Post
    Quote from JoZerByte: “Exactly the same problem. Trying a fresh install of OMV 4 with an existing RAID1 not showing on the GUI-File Systems menu. I can manually mount the array from the command line with no issues Here's my blkid…
  • votdev -

    Replied to the thread Upgrade Debian 9 and 4.x.

    Post
    Quote from bowe: “Quote from thexma: “thank you @Wolf2000, replace new lines fixed it: line 109: def remove(wr, selfref=ref(self)): replace with: def remove(wr, selfref=ref(self), _atomic_removal=_remove_dead_weakref): line 117:…
  • gabs247 -

    Posted the thread OMV 3.x (stable) Docker Plugin Error Setting New Base Path.

    Thread
    Hi, I'm really struggling here. I can't seem to find anyone with the same error that I'm getting, I think I've corrupted something. I get the following: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin;…
  • cabrio_leo -

    Replied to the thread default Login - first login?.

    Post
    From the picture in the first post I would assume it shows a local console login, no SSH. I you want to use 'root' for login, you have to use the approprate password. This is normally set during the installation process, if the default omv installer is…
  • Dropkick Murphy -

    Replied to the thread OMV 4.x (testing) OMV on Buffalo LS-WVL.

    Post
    Please show Source Code (1 line) and Source Code (1 line)Also Source Code (1 line)would be helpful.
  • patrick168 -

    Posted the thread OMV 3.x (stable) Help on rsync syntax.

    Thread
    I moved one of my OMV machines (DESTINATION) to mom's house to rsync from my Gen8 (SOURCE) at home. I can SSH shell at her machine back to the Gen8, so port forwarding rule and public key settings are all good. However, when it remote rsync (pull) with…