Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Markess -

    Liked tkaiser’s post in the thread Which energy efficient ARM platform to choose?.

    Like (Post)
    Quote from Markess: “The NanoPi NAS kit looks like a more elegant solution for my needs ” But you won't be able to use your 'Pi Drive' with it (only as external drive). NanoPi NEO2 and Orange Pi Zero Plus are more or less the same. The only real…
  • donh -

    Replied to the thread OMV 4.x (GIT/pre-alpha) Samba AD/DC integration.

    Post
    I need to clean the other thread and put in some other links and then pin it. Keep thinking I will get to it. sssd seems to be what works for me and I have done it many ways over the years. I am guessing people higher up are working to automate it…
  • Markess -

    Replied to the thread Which energy efficient ARM platform to choose?.

    Post
    Quote from tkaiser: “But you won't be able to use your 'Pi Drive' with it (only as external drive). NanoPi NEO2 and Orange Pi Zero Plus are more or less the same. The only real difference is voltage regulation for the CPU. NEO2 is limited to 1.1V while…
  • vshaulsk -

    Replied to the thread Storage File System Choices based on requirements - Suggestions?.

    Post
    Finally got the system up and running. Had to replace all the SAS cables that went from the HBA to sas backplane of the norco case. The ones that came with the HBA were no good. I decided to try ZFS plugin for OMV. The plugin seems to work alright. It…
  • boh73 -

    Liked Huberer’s post in the thread OMV 3.x How to see runnings VM's under CLI?.

    Like (Post)
    Ok, I found a solution here in the forum. With Source Code (2 lines)I can see my VM.
  • Replaced the SAS Cables from the HBA to the backplane and everything started working. All drives recognized and am able to create mdadm raid or ZFS The cables that came with the HBA's off of Ebay were ...... ummmm..... not so good (Sh******)
  • drew_p13 -

    Replied to the thread OMV 3.x Resolved Import data disk?.

    Post
    Wow, Midnight Commander is one of the greatest things I have ever used haha Thanks so much, that's exactly what I was looking for.
  • ryecoaaron -

    Replied to the thread OMV 3.x Resolved mySQL not reachable over network.

    Post
    Quote from ph1: “I tried to change the binding directly in the my.cnf file and not in the web admin ” Any change in the web interface and it will be changed back. Changing my.cnf directly is not recommended.
  • ryecoaaron -

    Replied to the thread OMV 4.x (GIT/pre-alpha) Fail2ban for OMV 4 Arrakis.

    Post
    Quote from HydrexHD: “How can i install the Fail2ban plugin on Openmediavault 4 Arrakis? ” You can't. It hasn't been ported to OMV 4.x.
  • ryecoaaron -

    Replied to the thread OMV 4.x (GIT/pre-alpha) Upgrade 3.x -> 4.x Why php5 AND php7 packages in OMV-4 ?.

    Post
    Quote from Titanet: “i had to install the dirmngr package before to run ” That is why the omv-extras install procedure always has apt-get -f install after the dpkg command. It will install the dependencies omv-extras needs and one of those is dirmngr.
  • ryecoaaron -

    Replied to the thread Errors with OMV-Extras on fresh OMV 4.0.14-1.

    Post
    Quote from djpollum: “Does anybody have an idea to solve this? ” While I do need to fix this, it isn't really an important error and there is nothing for you to solve. The code to look at the grub config is faster than the code to hide the kernel…
  • cabrio_leo -

    Replied to the thread OMV 3.x Resolved Import data disk?.

    Post
    Quote from drew_p13: “Is there any way to import this disk by plugging it straight into the server itself and transferring the data, ” Yes, you can mount the disk by the WebUi. The disk is then mounted under /srv. Personally I have used Midnight…
  • ChacalCH -

    Posted the thread OMV 4.x (GIT/pre-alpha) Upgrade 3.x -> 4.x Can't connect to webinterface & a lot of error messages after upgrade.

    Thread
    Hi I tried to upgrade an existing OMV installation. I was wondering if somebody could indicate a way to safe the system, otherwise I'll do a complete reinstall. I get the following error messages, do you have any suggestions what I can do to fix the…
  • ph1 -

    Replied to the thread OMV 3.x Resolved mySQL not reachable over network.

    Post
    hey guys, I'm facing the same problem. I changed binding adress to 0.0.0.0 and changed host to % for my kodi mysql user. But still, I am getting error "ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.178.230' (111)". Do you have any…
  • drew_p13 -

    Posted the thread OMV 3.x Resolved Import data disk?.

    Thread
    Hi all, So I finally set up my ZFS pool and SMB share, and am able to access it from my computer. Now I need to put all of my data onto the server, which I have on a SATA hard drive. Is there any way to import this disk by plugging it straight into the…
  • drew_p13 -

    Replied to the thread OMV 3.x Resolved Cannot view filesystem after creation.

    Post
    Awesome! Thanks so much for your help. I've got my ZFS pool and my SMB share all set up, and can access it from my computer. I'm marking this thread as resolved and I'll post any other questions in the appropriate place on the forums.
  • jollyrogr -

    Replied to the thread OMV 3.x Bad Performance of minidnla plugin serving videos to vlc on iphone.

    Post
    I use samba and vlc on ios to play videos and it works great. It will play bluray quality mkv without issue. Don't use dlna at all.
  • General vodka -

    Liked tkaiser’s post in the thread Which energy efficient ARM platform to choose?.

    Like (Post)
    Quote from flmaxey: “It has become the right thread to babble about (energy efficient) R-PI's, and other less frequently used ARM devices. ” Yeah, let's talk about the way more interesting ARM devices compared to Raspberries :) Challenge: (less than) 5W…
  • drew_p13 -

    Replied to the thread OMV 3.x Resolved RAIDZ1 or Mirror?.

    Post
    Quote from cabrio_leo: “Not sure if a raidz1 is possible with only two drives. I thought it must be at least 3. Anyway if you want to use two drives, a zmirror is way better - easy resilvering, great performance. More of them: ZFS: You should use mirror
  • cabrio_leo -

    Replied to the thread OMV 3.x Resolved RAIDZ1 or Mirror?.

    Post
    Not sure if a raidz1 is possible with only two drives. I thought it must be at least 3. Anyway if you want to use two drives, a zmirror is way better - easy resilvering, great performance. More of them: ZFS: You should use mirror vdevs, not RAIDZ.