Search Results

Search results 1-20 of 343.

  • Docker GUI plugin now stable

    Sergio - - Plugins

    Post

    Last night I tried upgrading a system clone in the spare disk. It failed miserably. So I reverted. And I had another issue with docker while the plugin was offline. Suddenly my containers where not starting and then they disappeared. Without me doing anything, only rebooting. But in the end I managed to diagnose it. I store the data from my containers in a ZFS array. Its mounted in the Z2 directory, and I refer it in my containers, for example: /Z2/docker-data/emby. Well, since the docker plugin…

  • Docker GUI plugin now stable

    Sergio - - Plugins

    Post

    So, do you recommend upgrading? Is there a guide?

  • Docker GUI plugin now stable

    Sergio - - Plugins

    Post

    I'm only running 3 containers. I'm still in 2.0 because I thought 3.0 was still in testing stage. Also I read something about ZFS not working in 3.0. Could be that I was wrong?

  • Docker GUI plugin now stable

    Sergio - - Plugins

    Post

    Hello subzero79. Mmmm... no, I think you didn't understand. But it seems the problem is that my docker plugin doesn't turn on. It happened before, but previously stopping the containers at command line let the plugin start. Now I can't start it, using the new folder or the old one. With containers off or anything I try. After saving, It stays for one minute and then throws the error. Is that same error I reported: link but now I can't find anything to make it work. Docker works at command line l…

  • Docker GUI plugin now stable

    Sergio - - Plugins

    Post

    Is there any way of changing the docker working folder? I'm moving my docker system and containers from one array to other. I stopped all the containers, then the plugin and replicated the two main folders I'm using on the new disk, but when I try to change the base path in the plugin, it throws a "communication error" or "Gateway Time-out" I suppose that whenever I can do this I will be easy to replicate the containers using the new shared folders.

  • openmediavault.local!!!

    Sergio - - Network

    Post

    Thanks you guys. I was tinking more of something running on bonjour/zeroconf/avahi protocol. The fact is that openmediavault publishes it's domain name correctly but none of the raspbian machines does. Without doing nothing I can access openmediavault.local, but not p3steel.local (my 3d printer) or domoticz.local. I investigated that past night and came across that installing apples bonjour on a windows machine got this machine resolving the raspis. But that left behind the androids. There's not…

  • openmediavault.local!!!

    Sergio - - Network

    Post

    Hello guys. Today I realized that my server is also reachable at myservername.local. Just out curiosity, how exactly is that accomplished? Sometime ago I tried it and failed. Then I thought it was only a matter of having avahi installed, but today I've tried it again on two raspis without success. Is something about the domainname registration?

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    Oh, sorry, i did search for "stale cache" as is. The file is present and as content. I can see references to the disks by id. Anyways I executed # zpool set cachefile=/etc/zfs/zpool.cache Z2 and rebooted. The pool it's online now! I think we also improved it with the id change. Thanks.

  • No updates via GUI, errors via CLI

    Sergio - - General

    Post

    I got yYour omvextras update and after apt-get update shows this at the end: Quote: “Ign dl.bintray.com wheezy/main Translation-en Descargados 702 kB en 17seg. (40,9 kB/s) Creating index of upgradeable packages ... Creating index of openmediavault plugins ... Leyendo lista de paquetes... Hecho W: Error de GPG: packages.omv-extras.org stoneburner Release: Las firmas siguientes no se pudieron verificar porque su llave p?blica no est? disponible: NO_PUBKEY 7AA630A1EDEE7D73 ” Executing your command …

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    I haven't found anythig related to "stale cache" on the link you previously sent. Is there a way to "debug" it? I don't think is anything wrong with the pool or cache. If so it would also cause issues when manually importing. I'm suspecting more on some weird init problem with init order/permissions or anything that could have changed during a system update. That message shown about doing a pool update, you've seen it? Could that be the reason?

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    I executed the following commands: Quote: “# zpool export Z2 # zpool import -d /dev/disk/by-id Z2 ” And the pool was correctly imported using device id's as it showed on zpool status. Quote: “# zpool status pool: Z2 state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the f…

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    The default line also didn't work. The output from zpool status after manually import is: Quote: “# zpool status pool: Z2 state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: resilvered 56,3M in 0h1m with 0 errors on Su…

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    I've tried "/dev/disk/by-id" and "/dev/disk/by-path" without success.

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    Hello nicjo and thank you. The ZFS_MOUNT variable is correct but the import path is commented out. What should be in there, the /Z2 folder name? Quote: “# Specify specific path(s) to look for device nodes and/or links for the # pool import(s). See zpool(8) for more information about this variable. # It supersedes the old USE_DISK_BY_ID which indicated that it would only # try '/dev/disk/by-id'. # The old variable will still work in the code, but is deprecated. #ZPOOL_IMPORT_PATH="/dev/disk/by-vd…

  • No updates via GUI, errors via CLI

    Sergio - - General

    Post

    I'm having the same problem, but the repo failing is the omv-extras one. Is anything bad in this instalation? Quote: “Get:56 ftp.es.debian.org wheezy-updates/main Sources [5505 B] Get:57 ftp.es.debian.org wheezy-updates/main amd64 Packages [7047 B] Get:58 ftp.es.debian.org wheezy-updates/main Translation-en [4879 B] Fetched 18.4 MB in 31s (591 kB/s) Creating index of upgradeable packages ... Creating index of openmediavault plugins ... Reading package lists... Done W: GPG error: packages.omv-ext…

  • ZFS Plugin not mounting pool on boot

    Sergio - - Plugins

    Post

    I'm having problems with the ZFS plugin. After a system restart does not mount the existing ZFS pool. I have to go to the plugins interface and manually import it every time. That's a problem, because I store my images and containers there, so even aftar the pool is online, docker and virtualbox still fail and I have to go there and restart or even reconfigure them , as in case of docker. I've already tried reinstalling the plugin without results.

  • ZFS Pools are not imported at boot. I have to manually import them each time. Virtualbox says: Object functionality is limited. Docker, after repairing it's configuration doesn't show any of my servers. Ahhh... I'm about to drop this thing and make a decent windows server machine. EDIT: It seems that all my remaining problems are from ZFS not mounting at boot.

  • Started a recovery linux distribution and modified the network interfaces file to remove all IPv6 stuff and managed to continue booting. Then shows the following message: "chgrp: cannot access '/var/log/dmesg': no such file or directory" Followed by some other messages from umount, trying to unmount some /var/folders including /var/lib/openmediavault/rrd always showing "not mounted" Then stucks again for a quarter of an hour then resumes booting until the end. After that I can log into the web g…

  • General server and networking malfunction

    Sergio - - General

    Post

    As I can't diagnose the problem and it's too strange to me, I'll try to describe the situation. Yesterday my emby installation starrted to act strange. The emby app on my Tv seemed to log into the server but it wasn't loading all the contents. Only one or two here and there (I'm talking of video lists) So I went to my computer and tried to log into omv web gui, without success. Also I tried to log into ipmi web management but couldn't get into it. I realized that if I leave those pages loading, …

  • Boot hangs for 10-15 minutes

    Sergio - - General

    Post

    Yes, I am. Thanks. Enviado desde mi A0001 mediante Tapatalk