Search Results

Search results 1-20 of 397.

  • Quote from mrtata: “Hi, just to give you a little feedback on my config. here it is: - motherboard: ASROCK H270M-ITX/ac (with 6 sata port) - CPU: Pentium G4400 - rad CPU: BeQuiet Pure Rock Slim - RAM: Ballistix BLS8G4D240FSC Sport LT 8Go DDR4 - Power: BeQuiet Pure Power 700W (semi-modular) - HDD: Raid5 with 3xWD red 3TB and Raid5 with 3xIronWolf red 3TB - SDD for OMV: Transcend SSD 32Go (plugged on usb3) - Case: Fractal Design Node 304 I had it for around 400€ (without HDDs) I'm using this for a…

  • comunque che scheda madre monta? e il dissipatore invece?

  • Se posso dire la mia: la versione 4bay andrebbe assogiata ad un pentium, non vedo grande necessità di un i5. Secondo me riuscireste ad abbassare il prezzo e rendere il tutto più invitante

  • lots of errors after rebooting my NAS

    Blabla - - General

    Post

    didn't see it! I'll keep it in mind for the next time

  • lots of errors after rebooting my NAS

    Blabla - - General

    Post

    seems like afte rrebooting everyting is fine.. I don't know what to check to avoid getting this error again

  • lots of errors after rebooting my NAS

    Blabla - - General

    Post

    syslog is a mess right now I made something wrong with deluge+sonarr and now syslog is just of log from deluge. How can I clean it up? Then I'll restart my nas to see what can I find out

  • lots of errors after rebooting my NAS

    Blabla - - General

    Post

    3.0.91, I was going to update to 3.0.92 but maybe is better resolve this before update Can I check some logs?

  • lots of errors after rebooting my NAS

    Blabla - - General

    Post

    Hi everyone. The last two times that I reboot my NAS I had it stuck in initramfs. After shutting it down twice it started anyway. The first time everything was fine after it started up, but this time I got a lot of errors as soon as I looged in the web interface: Source Code (22 lines) IF I go into ZFS and Raid management they are both empty, even if I can still navigate throught them from Windows

  • Solved? OMV and software raid 5

    Blabla - - My NAS Build

    Post

    question: how should I check how much it will take to completion when I run the scrub from the OMV interface? I just finished to copy 1TB of data on y ZFS mirror, I did a last scrub, then I'll reboot my NAS and check that everything is ok

  • RAID1 disappeared

    Blabla - - RAID

    Post

    thanks @Sk0rp , I already made a ZFS-mirror, so I think that this topic can be closed as unresolved

  • Solved? OMV and software raid 5

    Blabla - - My NAS Build

    Post

    not sure what happened, after something like 20 minutes I reboot my NAS. After that it couldn't boot anymore and it was stuck during the intramfs load. Here's a screenshot: 2A7Uv5t.jpg After 2/3 reboot it returned working, and the zmirror is still here. Should I check if the zmirror is fine? If yes, how? I didn't put any file on it yet

  • Solved? OMV and software raid 5

    Blabla - - My NAS Build

    Post

    great| it worked and now I have a ZFS mirror I didn't activate the compression since it will contain only media files that are already compressed. Also I'm not sure about the jobs, I read that it should already have a default jobso I don't need to create an other one right?

  • Solved? OMV and software raid 5

    Blabla - - My NAS Build

    Post

    Quote from cabrio_leo: “Quote from Blabla: “Should I Wipe the hard driver from gparted, creating even a new gpt table? ” Hi @Blabla normally it is not necessary to create a gpt table manually. I created my pool out of disks which were simply (quick) wiped. Therefore try wiping the disks in OMV and then try to create the pool with the ZFS plugin with no steps inbetween. You can do this also bei CLi: zpool create -o ashift=12 your_pool_name mirror /dev/disk/by-id/ata_WDC1_%no% /dev/disk/by-id/ata_…

  • Solved? OMV and software raid 5

    Blabla - - My NAS Build

    Post

    I tried to create a Zmirror (since I have two hard drive), I used the same exact settings in the first page, including After clicking save I recieved this error: Source Code (15 lines)What did I do wrong? Should I Wipe the hard driver from gparted, creating even a new gpt table?

  • Mirror disappear after reboot

    Blabla - - RAID

    Post

    So there is really no other suggestion other than "buy an external box for the second hard drive"? As someone suggest int the zfs topic, with my build zfs is not the best solution If possible I would lie to have my RAID1 working Do you think that is worth to try to create the RAID1 directly from the cli and call it md128 instead of md0?

  • The biggest issue for me is time. RAID1 is not a backup, but at least your data are on two different hard drives. Everything that is really important is saved on an external hard drive. RAID1 is for everything that I don't want to be on only 1hdd, but also not so important that I need to backup it every time.

  • RE:

    Blabla - - Updates/Upgrades

    Post

    @Blabla Quote from Blabla: “Hi everyone. Since mdadm RAID is giving me a lot of trouble, I want to build a ZFS mirror. I didn''t do it for now, but I will probably this Saturday or Sunday. Do you suggest to update to OMV4 before installing the ZFS plugin and then, once I'm with Debian 9, kernel 4.13 and everything else updated, install the zfs plugin? ” I hesitate to ask, but what are/have been your mdadm RAID troubles? Fixing those may mean you don't need zfs, which if you believe what you read…

  • RE:

    Blabla - - Updates/Upgrades

    Post

    Quote from Krisbee: “@ryecoaaron Understood it would just be deb packages for zfs 0.7.3 and not modules, that was just my careless use of language. My comment about Sid was to those using it now, not yourself. @Blabla Quote from Blabla: “Hi everyone. Since mdadm RAID is giving me a lot of trouble, I want to build a ZFS mirror. I didn''t do it for now, but I will probably this Saturday or Sunday. Do you suggest to update to OMV4 before installing the ZFS plugin and then, once I'm with Debian 9, k…

  • Solved? OMV and software raid 5

    Blabla - - My NAS Build

    Post

    Quote from tkaiser: “Quote from Blabla: “Since I'm interested in some feature of OMV$ (mostly the possibility to install the latest python-bittorrent needed for the latest deluge), do you suggest to update to omv4 before create the ZFS pool? ” Please read through this carefully: Is ZFS supported in Kernel 4.13? ” Thanks a lot! I didn't saw that thread!

  • Hi everyone. Since mdadm RAID is giving me a lot of trouble, I want to build a ZFS mirror. I didn''t do it for now, but I will probably this Saturday or Sunday. Do you suggest to update to OMV4 before installing the ZFS plugin and then, once I'm with Debian 9, kernel 4.13 and everything else updated, install the zfs plugin?