Search Results

Search results 1-20 of 31.

  • Kann Server nicht mehr wecken per WOL

    Don - - Network

    Post

    gibt dir wol.exe einen Fehler aus? bei mir hat das Tool fast nie die Netzwerkkarte zuordnen können um an den Broadcast zu senden. Es hat dann nur geklappt wenn ich an x.x.x.255 gesendet habe. Bei WOL2 könnte es evt am Port liegen. Bei mir hat es auch nur mit "Netcast" funktioniert, das steht wohl für “Directed Broadcast”. ansonsten kannst du es mal mit wolcmd.exe Versuchen, damit hat es bei mir auch funktioniert. depicus.com/wake-on-lan/wake-on-lan-cmd.aspx

  • idle power consumption

    Don - - General

    Post

    You can find it in UEFI, Advanced, ACPI Configuration PCIE Device Power On Handbook S.41

  • idle power consumption

    Don - - General

    Post

    When you shut down OMV, is the green LED on the NIC on or OFF?

  • idle power consumption

    Don - - General

    Post

    Support the nic driver wake on LAN? You can check this with ethtool eth0

  • Ja das ist richtig, man braucht nur einen Zugriff auf den Port. Womit ist egal. Gruß Don

  • Hier ein kleine Anleitung zur WOL/Wake on Internet Nutzung in Verbindung mit OpenVPN von einem Win7 Client aus. Voraussetzungen: Board und Netzwerkkarte unterstützen WOL. Kompatibler Router(Broadcastweiterleitung oder Weckfunktion) DNS Account oder Feste IP vom ISP Feste IP für das NAS im LAN OpenVPN Gui Tool zum senden des Magic Paket (wolcmd) depicus.com/wake-on-lan/wake-on-lan-cmd.aspx Tool zum erzwingen des non-elevated Modus für das Script (hstart) ntwind.com/software/hstart.html Natürlich …

  • Wake on LAN alx

    Don - - Network

    Post

    It works great! Thank you!

  • openvpn help

    Don - - General

    Post

    In Windows: C:\Program Files\OpenVPN\config\ Start the client with admin rights. right click "start as Administrator" in the properties, you can activate it permanent (compatibility, run as admin...) the names can be a little different, german version

  • Wake on LAN alx

    Don - - Network

    Post

    That will be great. The intel Product spec. Zyr9K8O.png so it should work?!

  • Wake on LAN alx

    Don - - Network

    Post

    Thank you! Can´t understand why this NIC make so many problems... I hope this one works?! Intel® Gigabit CT Desktop Adapter, Netzwerkadapter(EXPI9301CT, Bulk)

  • Wake on LAN alx

    Don - - Network

    Post

    The first Kernel was 3.2.0-4 with this i had no NIC support (AR8171) this is the lspci answer: but there is no pci alias... Source Code (22 lines)

  • Wake on LAN alx

    Don - - Network

    Post

    i use the Backportkernel 3.16 with 3.2 the NIC was not Supported...

  • Wake on LAN alx

    Don - - Network

    Post

    How can i test the patch? if it doensn´t work, how can use the old driver?! Sorry, but this is my first Linux system.

  • Wake on LAN alx

    Don - - Network

    Post

    Hello, I have a Qualcomm® Atheros® AR8171 MB NIC. but the current alx driver has no Wake on LAN Support... Is it possibe to activcate this function, or using a other way to start OMV from LAN? Thank you! Don

  • Temperature CPU?

    Don - - General

    Post

    That looks very good! Thank you! i will check the bios CPU-temp later.

  • Temperature CPU?

    Don - - General

    Post

    Now i see the fan speed etc, but the CPU Temp is the same. In etc/sensors3.conf is nothing for k10temp only k8temp.

  • Temperature CPU?

    Don - - General

    Post

    i use the version is 3.3.2 Date 2012 is it possible to update to 3.3.5? its the current version. and work the graph with this version? i get this message (run sensors-detect): Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers w83627ehf #----cut here---- add this to modules?

  • Temperature CPU?

    Don - - General

    Post

    Quote from jhmiller: “It does look like its detecting the right sensor, the only way to be sure is to do cat /usr/share/openmediavault/mkconf/collectd.d/sensors and if you see lines like ${DATA}/sensors-k10temp-pci-00c3/temperature-temp1.rrd it is working ok” This is one line from output DEF:cpuc0avg=\${DATA}/sensors-k10temp-pci-00c3/temperature-temp1.rrd:value:AVERAGE \ i take a look in the UEFI there a Temps ~ 40-50°C

  • Temperature CPU?

    Don - - General

    Post

    sensors: radeon-pci-0008 Adapter: PCI adapter temp1: +9.0°C (crit = +120.0°C, hyst = +90.0°C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +15.0°C (high = +70.0°C) (crit = +70.0°C, hyst = +69.0°C) ________________________ ls /var/lib/rrdcached/db/localhost/sensors-*/: /var/lib/rrdcached/db/localhost/sensors-k10temp-pci-00c3/: temperature-temp1.rrd /var/lib/rrdcached/db/localhost/sensors-radeon-pci-0008/: temperature-temp1.rrd ________________________ cat /proc/cpuinfo: processor : 0 vendor_id : …

  • Temperature CPU?

    Don - - General

    Post

    I see the graph but the Temp Values are: 0.5 Min 7.93 Avg 18.30 Max 6.20 Last The values are to small?!