Search Results

Search results 1-20 of 103.

  • Upgrade 3.x -> 4.x Procedure

  • Plex Plugin or Docker CE Plex

    ajaja - - Plugins

    Post

    Now seems to be the best time to get your Docker on.

  • Dual Nic and one switch

    ajaja - - Network

    Post

    Quote from tinh_x7: “Some mode like RR, TLB...Try out each of them to see the result. I'm using TLB. ” Thank you for your response. Please understand that I ask here because I am a bit clueless. (Railroad and Tender Loving Beach) What are RR & TLB? Any pointers as to how you enable and use TLB? allacronyms.com/TLB/Network allacronyms.com/RR/Network

  • Dual Nic and one switch

    ajaja - - Network

    Post

    I too would like to know what I can do with my additional Nic. I am sure there is an advantage with Docker. I do run Haugene/Transmission-OpenVPN. So what can be done with a second(third) Nic?

  • - I am running 0MV 4 on my T30. I am also running bios 1.02 so that I can use the M.2 as my boot drive. Grub was not loading for OMV 3 in my early attempts.

  • mergerfs.balance doesn't work

    ajaja - - Plugins

    Post

    Quote from gderf: “Is there a reason you cannot remove the drive you wish to empty from the defined mergerfs pool and then… ” I assumed that at the time the drive is removed from the pool its data too would be unavailable. If so each service that depends on the data would need to be downed. My question was not asking how to remove a drive from the pool and copy or move its contents. Rather I was checking if mergerfs.balance or any of the mergerfs-tools would have the ability to automate the proc…

  • mergerfs.balance doesn't work

    ajaja - - Plugins

    Post

    Quote from gderf: “Is there a reason you cannot remove the drive you wish to empty from the defined mergerfs pool and then copy or move its contents to a location in the pool? ” Nope, yet that is not the point of my query. It would be nice to be able to remove the drive's content without taking the server out of service.

  • mergerfs.balance doesn't work

    ajaja - - Plugins

    Post

    Quote from trapexit: “…by using the exclude path option you could exclude specific drives in the pool from being targets so you could balance files to a subset of drives. It might not be too much work to add a flag to filter targets by available directory but I'm not sure it'd work too well TBH. ” I am appreciating mergerfs.balance. I recently brought a drive online that is 150% the capacity of the next largest drive. It is great to have this tool to redistribute and unburden my smaller drives. …

  • Here is what I have done today: Stopped PLEX container # cp -r /home/whale/.config/ /srv/7911fa44-a322-442c-a434-6c2ad2f3b1ff/whale/.config/ # chown whale:users -R /srv/7911fa44-a322-442c-a434-6c2ad2f3b1ff/whale/.config/ # ls -lah /srv/7911fa44-a322-442c-a434-6c2ad2f3b1ff/whale/.config/ Checked that folders were executable: drwxr-xr-x 3 whale users 4.0K Apr 3 09:45 plex In Docker UI; pointed /config from: /home/whale/.config/plex to: /srv/7911fa44-a322-442c-a434-6c2ad2f3b1ff/whale/.config/plex S…

  • Quote from ajaja: “Could this have anything to do with my data volume being a UnionFS mount? If so how do I solve? ” I have received many great leads here and I might have a bit of time today to break my server some more. @Huberer and @gderf have given much to work with. It seems that mergerfs is a sticky booger, when it comes to PLEX and others. Here is another reference that I will be working on understanding. My current mergerfs options: fuse.mergerfs defaults,allow_other,use_ino,dropcacheonc…

  • mergerfs.balance doesn't work

    ajaja - - Plugins

    Post

    @trapexit, I am getting an error that I do not know what to do with. Sure would appreciate your guidance. Thank you Here is my input/output: root@OMVi3:/# python --version Python 3.5.3 root@OMVi3:/# mergerfs.balance -s 10M -e "*aquota*" -e "snapraid*" -e "stignore*" -E "*docker/*" -E "*stfolder/*" /srv/7911fa44-a322-442c-a434-6c2ad2f3b1ff/ /usr/local/bin/mergerfs.balance: line 7: syntax error near unexpected token `newline' /usr/local/bin/mergerfs.balance: line 7: `<!DOCTYPE html>' How I install…

  • Quote from ryecoaaron: “...It seems like your setup is failing when ACLs are in place. Try removing those. ” ACLs have been gone for a few days. I will keep at this, but I am at my hair pulling limit. Might just put in a 120GD boot device. That should hold my docker and plex data for a while.

  • Could this have anything to do with my data volume being a UnionFS mount? If so how do I solve?

  • Well this(OMV) has been a learning experience for me. I do appreciate the help I get here. Tricky to ask questions when I am limited in understanding the subject. This is my first venture into Docker. I have been doing my learning on my secondary server. It will be a week before I come back to that computer. In the meantime I realize that my primary server has a 220GB M.2 boot drive. I am thinking it best to keep Docker and PLEX needs on that big fast drive. Which I got up and running last night…

  • 10GB Mellanox (MCX353A-QCBT) OMV3 OFED

    ajaja - - General

    Post

    Quote from RacerX: “There is an option I'm not sure about this so i'd though I ask if it's ok to try this. ” I read your post twice. I looked for what you are asking. Did you ask a question? What is it you are wanting from this community?

  • Mine docker:users drwxr-xr-x — works drwxrwxrwx+ — doesn’t work Your’s fred:users drwxr-sr-x — works So when I look at my two; I am led to think the + has something to do with it. Now looking at your’s; I am led to wonder about the s Any chance I may be on to something?

  • Please show me an example of what the permissions are on the folders your Plex container uses. I followed @flvinny521‘s directions and they work as long as the ./confit is created in /home. The docker container populates the subdirectories of /.confg/

  • Quote from gderf: “Absolutely. But for Plex that really isn't a docker config file that would normally be named .config. It's the location of of the Plex Media Server Database. I have mine here: /srv/dev-disk-by-label-dp1/plexmediaserver-dockered There is or will be one folder in there - Library. ” I am not sure what you are suggesting. /.config/plex is a directory I created. The container has /config as a perimeter. From linuxserver/plex /config - Plex library location. This can grow very large…

  • Quote from gderf: “Try this. Instead of pointing /config to /sharedfolders/whale/.config/plex navigate to the actual drive mountpoint instead. ” Like so: /srv/7911fa44-a322-442c-a434-6c2ad2f3b1ff/whale/.config/plex/ ? forum.openmediavault.org/index…2559eb1f2d7eb26425de02031 This is wat I got: #################################################### # Login via the webui at http://<ip>:32400/web # # and restart the docker, because there was no # # preference file found, possibly first startup. # ####…

  • Move /home folder to Data Drive

    ajaja - - General

    Post

    Quote from gderf: “...Just don't point your docker files or Plex Database to /home. ” For me it does not seem to be that simple. My attempts to do so have come up short. Would someone be willing to explain a procedure to point them elsewhere?