Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Duplicati

    ryecoaaron - - General

    Post

    Quote from Currymunster: “Just checked and it's not installed - Thumbs down! ” It isn't included with omv itself.

  • Raid Mirror

    ryecoaaron - - RAID

    Post

    Quote from Currymunster: “I see - I run a business from home and need certain files to complete invoices, send them and type up quotes so I need it all the time so I'm guessing the RAID Mirror is a good option. ” I don't use a mirror array anywhere. I think rsync/rsnapshot is better. Quote from Currymunster: “The rsync sounds good but I assume I would need another backup sauce for that? ” If you rsnapshot (uses rsync) from one drive to another, you would have the source plus a number of hourly, …

  • Add LSI SMI-S Provider to OMV

    ryecoaaron - - General

    Post

    It is possible to install an RPM on Debian but I'm not a fan of this process. I guess you could try it in a VM though.

  • Add LSI SMI-S Provider to OMV

    ryecoaaron - - General

    Post

    You posted instructions on installing the package for CentOS/RHEL/etc. Are there instructions for installing on Debian or Ubuntu? That should be all you need to do.

  • Quote from therock003: “IS there a way to do this without paying ” It can be scary but you should be able to recreate the partition with fdisk as long as you create it exactly the same. extundelete might help you too.

  • Raid Mirror

    ryecoaaron - - RAID

    Post

    Quote from Currymunster: “I was on the assumption that if one drive failed you had a fail safe so in a way its backed up?? ” It is safe if one drive fails BUT if you delete a file accidentally, it is gone on both drives instantly. So, that is why it is not backup. Quote from Currymunster: “I don't understand what redundancy means in this situation?? ” Redundancy is that you system can keep running if one drive fails. This is usually not needed by home users. If you were running a scheduled rsync…

  • Duplicati

    ryecoaaron - - General

    Post

    Quote from Currymunster: “How do I tell?? ” If there is a plugin in the list that is named openmediavault-omvextrasorg, then it is installed. I suggest watching these videos otherwise - Installation and Setup Videos - Beginning, Intermediate and Advanced

  • Execution failed Service nginx

    ryecoaaron - - General

    Post

    Quote from mrperfektone: “How should I solve it just got them again after reboot ? ” Your system is a mess... Try to start each service and check the status with systemctl status and journalctl -xe. The error messages should tell you more.

  • Duplicati

    ryecoaaron - - General

    Post

    Quote from Currymunster: “How do I install it. ” Do you have omv-extras installed?

  • Raid Mirror

    ryecoaaron - - RAID

    Post

    1 - yes 2 - most of the time 3 - You can fail one drive at a time and replace with a larger drive then resync for each drive. After all drives are replaced, you could grow the filesystem. But... Ask yourself why you want raid. It isn't backup and only gives you redundancy. I recommend to most people who want a mirror to use rsync instead since most people don't need realtime mirroring. If you are just trying to pool the drives, the unionfilesystem plugin is a good option. If you still want some …

  • Quote from dojrude: “Am I going to have issues with my docker instances if I have to remove and reinstall both docker and imv-extras manually? ” I don't know why it didn't upgrade. This file should make it upgrade properly. I will have to test. That said, you shouldn't have to remove the plugin. After you re-installed omv-extras, the plugins should upgrade without uninstalling.

  • Where to start ?

    ryecoaaron - - General

    Post

    Quote from Guffe: “Where should I start? ” Set up rsync server and modules on the camres. Set up rsync job on pinas. There are a couple of guides on the forum about setting this up. Quote from Guffe: “Since I would like to run this at a cron job every day I guess I need to be able to do ssh with no password? ” Nope. You can setup a scheduled rsync job that uses the rsync protocol. I use it myself.

  • Automount with BTRFS failed

    ryecoaaron - - General

    Post

    /dev/md0 may exist but is the array assembled and functioning? cat /proc/mdstat

  • Quote from tkaiser: “Thank you for the report. Since it boots everything's ok and it can replace the older variant at SF. ” I'll upload it after fixing the fallout from IBM's wonderful SAN...

  • Execution failed Service nginx

    ryecoaaron - - General

    Post

    Quote from mrperfektone: “And no, I have had email notification for the last 3 months and these "error" mail are some that have arrived either after I ran the command you gave me / or update that I made on the box. I am very pleased with openmediavault but tired of you say i just have to turn mail notification from as soon as there are problems. ” It sounds like the system was powered off without going through the proper shutdown procedure that syncs the logs. This is a weakness of folder2ram (a…

  • Quote from GTvert90: “It still doesn't work unless I do 644 or 640 for permissions. ” If the permissions were 600, that would make sense. Quote from GTvert90: “Do I need to reboot or reset permissions after adding plex to users? ” Yes in order for the plex user to know about the new group. Existing processes aren't told about the new group.

  • Then I should make the change to omv-extras 3.x to fix it.

  • Quote from tkaiser: “But just to be sure at least booting of the image should be confirmed: ” I will test it later tonight when I get home (unless someone else does it first). Quote from tkaiser: “Do you take care that pinning also gets fixed when upgrading from OMV 3 to 4 with the RPi image? I believe we already talked about that but back then with the wrong outcome? ” If the 3.x image has the same pinnings as the 4.x image (don't remember), then the user will have to fix those pinnings. Pushin…

  • Quote from tkaiser: “that would justify touching again the OMV4 image for RPi and fixing the apt pinning in the first place? I'll have a look whether I have the SD card with the image still somewhere. Can adjust the file but not test (no RPi around any more). ” If you want to. I can test but it is such a small change that I'm not too worried.