Search Results

Search results 1-20 of 211.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • eMMC vers SD card

    richprim - - General

    Post

    Thank you for the answer. I will stick with good SD cards as you recommend. So far I have not had any SD wear out on me. I have been using Sandisk cards. Rich Prim

  • eMMC vers SD card

    richprim - - General

    Post

    This may not be the place to ask this question but I have not been able to get a satisfactory answer. What is the advantage of a eMMC over a SD card for the OS? Does it have more read and writes or maybe faster? Rich

  • Rock64 image

    richprim - - General

    Post

    Thanks so much for adding the Rock64 image to the list of single board images. Tried it our and so far works great. Rich Prim

  • Rock64 media board

    richprim - - General

    Post

    I can now login via SSH but get the following when i go to "omv-firstaid" and click on the net work setup ERROR: dialog-like terminated due to an error: the dialog-like program exited with status 3 (which was passed to it as the DIALOG_ERROR environment variable). Sometimes, the reason is simply that dialog was given a height or width parameter that is too big for the terminal in use. Its output, with leading and trailing whitespace stripped, was: Error: Expected at least 5 tokens for --menu, ha…

  • Rock64 media board

    richprim - - General

    Post

    Yes it worked, thank you for the info on "allowing root login". Rich Prim

  • Rock64 media board

    richprim - - General

    Post

    Got it working, I used the 0.6.44-239-arm64.img version. What confused me was at the end of the script, it said "no network interfaces available" and now ip address. So I assumed it needed omv-firstaid to get a ip address setup. Actually it was working and i found the ip address using zenmap. Once I logged in it worked. When I tried to go to omv-firstaid via the local monitor and keyboard connection, each time i typed a letter it would output a line of code. I was able to get to the omv-firstaid…

  • Rock64 media board

    richprim - - General

    Post

    As I said I tried both and neither work? The image that does work good is rock64-0.5.15-136-armhf.img. (OVM 3 image) Could the board be bad? Not sure, it does run ubuntu and other images. My board is a ROCK64_V2.0 2017 - 0713 Yes and 2 gig of ram I am at a loss how to fix this, I wonder if there is a image to test the board? Rich Prim

  • Rock64 media board

    richprim - - General

    Post

    I have now tried both the stretch-openmediavault-rock64-0.6.44-239 armhf and arm64 images Neither work. I have rock64-0.5.136 (openmediavault ver 3) and this works. My rock64 board is the 2 gb ram memory board. Rich Prim

  • Rock64 media board

    richprim - - General

    Post

    Tkaiser yes I was careful not to download the pro one. But as I said to vcp_ai, I read the armhf was the most comparable and that might be wrong. Rich Prim

  • Rock64 media board

    richprim - - General

    Post

    I see you are using the arm64 version, some people have said the armhf version. I will surely try this. Thanks so much for the quick response. I was getting a little disappointing. I did get version 0.5.101-armhf to work and after a upgrade it is working. But this is openmediavault version 3. Rich Prim

  • Rock64 media board

    richprim - - General

    Post

    Just got a Rock64 media board and can't find an OMV image that works. Tried to ones that are on the pine64 web site but they don't work. Apparently a lot of people are having the same problem. There Ubuntu image does work so I think the board is good? Any suggestions? Rich Prim

  • files that hold the settings

    richprim - - General

    Post

    Thank you, kind of figured that but worth a question Rich Prim

  • files that hold the settings

    richprim - - General

    Post

    This is probably answered before but I was unable to find it. Which setup files would I need to copy to a new SD card it i wanted to burn a new SD and just put in the files from an old but working SD card on a raspberrypi. Wasn't quite sure how to write this but I think you get the idea. Thank you Rich Prim

  • OVM 4 for Raspberrypi

    richprim - - General

    Post

    I found OVM 4 for the Raspberrypi under "OVM 4.x for single board computers" in downloads. Rich Prim

  • pine64 verses rock64

    richprim - - General

    Post

    Ok thanks for the answer. I am expecting the board shortly, a replacement for a Raspberrypi 3 Richard Prim

  • pine64 verses rock64

    richprim - - General

    Post

    Does anyone know if the pine64 image also work on a Rock64 media board ? Rich Prim

  • RPi image

    richprim - - General

    Post

    I realize the RPi 2 or 3 are not the best computers for OMV but the large number of RPi users should count for something. Maybe I miss understood but it sounds like there will be no image created for OMV 4 for the Raspberrypi? If I am incorrect please accept my apology. Rich Prim

  • RPi image

    richprim - - General

    Post

    Gentlemen Will we be seeing a ver 4 image for the Raspberryip. Rich Prim

  • Windows not finding network path

    richprim - - General

    Post

    Yes I built the file server for my Church as a test, if it didn't work for them no big deal. Not confident enough to charge a fee yet. It took some suggesting to get them to understand the benefits of a file server. Up till now everyone had there own little system. As they learned one Sunday, they could not get the power point file working because the girl mistakenly put a short cut, not a file on the desktop from her flash drive. After some digging we found the flash drive in her desk. Now they…

  • My Raspberrypi NAS

    richprim - - My NAS Build

    Post

    Thanks for the USB to Sata adaptor list. I printed it for future reference. You do list the VL711 in your info under the OK column. Its a Unitek device with a 2amp power supply. Thanks Rich Prim