Search Results

Search results 1-20 of 525.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hi everyone! Right now I have a RAID1 and a ZFS mirror configured on my NAS. I was thinking about undo both the RAID1 and ZFS-mirror and using a sync job instead. This way I can have a little versioning in case I accidentally delete something. Is it possibile to undo a RAID1 or ZFS-Mirror without losing my data? If yes, how?

  • Guys looking at the status of the scrubs I noticed that I can upgrade my pool. Should I do it after the scrub? I don't have a backup of the data on my ZFS mirror, is it a risky operation?

  • EDIT: wrong topic

  • Thanks! What's the command to launch a scrub? I will create a job inside "schedule job"

  • Guys I was looking into my NAS settings and I noticed that the last scrub with my ZFS pool is from 6 months ago D: Should I do a scrib now? Also: do you suggest to do a scrub every week? How can I do that?

  • Help me to rebuild my NAS

    Blabla - - General

    Post

    Quote from gderf: “Sorry, but I neglected to mention that taking a SnapRAID parity file to another machine and being able to use it to restore lost data would also mean you have to take all the remaining other disks that are part of the array too. That is to say that the parity file alone is not enough to restore a lost disk. The other remaining disks in the array are required to be present also if a restore is to be attempted. ” That was I was looking for. I know that rsync is a lot more expans…

  • Help me to rebuild my NAS

    Blabla - - General

    Post

    Thanks a lot again Quote: “Plex doesn't have what I can describe as "portable" application settings. They are contained in with the metadatbase directory, and mine is well over 100GB and it grows about 5GB per day. The others have configuration directories that are portable, but if you are running these apps in dockers, you need the docker container data and OMV's docker plugin configuration (not portable) to go with them if you think restoring this stuff will be easy. I just don't see anything …

  • Help me to rebuild my NAS

    Blabla - - General

    Post

    Thanks for the help! I will answer to everything, hope to clear what my intentions are Quote from gderf: “From what I have read so far, there will be no way to upgrade an OMV 4 to an OMV 5, so, regardless of what filesystem you choose for the OS drive, you'll have to do a fresh install from scratch. So picking BTFS for OMV 4 just for this reason gets you nothing. Also, I have a very hard time believing that EXT4 will be completely abandoned. If I can't use my existing on OMV 4 data array of 32TB…

  • Help me to rebuild my NAS

    Blabla - - General

    Post

    Hi everyone, I built my first NAS 2 years ago and after those two years and the help of many of you I think I'm ready to rethink my NAS from the scartch. Right know I have: -a 60GB ext4 SSD for OMV -1 RAID1 of 4TB as EXT4 - 1 ZFS Mirror of 6TB Right now I still don't have 4TB of data so I'm still in time to rebuild everything from the beginning. What I need is a NAS that will work flowlessy without particul problem or manteinance. I will use it mostly for backup my photo (I also have an external…

  • Quote from hoppel118: “@Blabla Read my post directly before your post. I had the same problem. I couldn‘t find another solution than that, but it works. If you use your nas for business purposes, it may not be a solution to do that, because you have to shutdown the server twice. But I am not a developer, maybe there is something that can be rewritten/changed at the plugin or maybe there is something else that can be done... By the way, I didn’t recognize that the main issue of this thread was so…

  • Quote from ellnic: “Quote from MasterChillerX: “So the ZFS Plugin was updatet today and erverything works fine with a fresh installed and updatet omv 4.1.7 with 4.16.0.bpo.1. Massive thanks to subzero79 and ryecoaaron for updating the plugin and helping a novice like me ” Nice. I have just updated the plugin here too, and can confirm that I now see ZFS pools in the dropdown. Go to the ZFS tab first and accept the config changes, then to the shared folders - and they are there! Nice work @ryecoaa…

  • Quote from flmaxey: “Quote from Blabla: “Quote from Blabla: “Guys so there is some workaround to this problem? Right now I can't share my mirror ” up. There is some way to resolve this? ” What are you looking for? A resolution (may take awhile) or a work around (potentially available, if you're willing to rebuild).Note; if you clone or at least backup your current boot drive, you'd be able to back out of the following. ______________________________________________________ Look at this post. -> …

  • Quote from Blabla: “Guys so there is some workaround to this problem? Right now I can't share my mirror ” up. There is some way to resolve this?

  • Guys so there is some workaround to this problem? Right now I can't share my mirror

  • Quote from ellnic: “/lib/modules/4.16.0-0.bpo.1-amd64 Yup. You’re on 4.16 Sent from my iPhone using Tapatalk ” FML, I did it again .-. I read the latest post, and update enabled the testing repo. After installing the latest zfs plug-in from the testing repo can I disabling it again? Edit: updated everything, but the ZFS partition is still not mounted Edit2: deleted the partition from the plug- in, exported and imported it again from CLI, now I can see that the FS is mounted but if I go into "sha…

  • Guys, I have a problem since the last time I reboot my NAS: when I go into the ZFS plug-in I recieve this errors: Source Code (14 lines)Source Code (2 lines) Did I again updated the kernel without noticing and broke the compatibility? T_T The kernel 4.16 is not compatible yer?

  • How to upgrade Sonarr from Docker?

    Blabla - - Plugins

    Post

    Thanks for the answer then I'll look for some guide in the future in case I'll need to update it!

  • How to upgrade Sonarr from Docker?

    Blabla - - Plugins

    Post

    Thanks! Not sure why the first time didn't worked I thought it was the wrong way to update it and never tried again Now it worked insted! What if i want to update the image? I looked and I have 113, while the last one is the 132. I'm not even sure what changes between them

  • Quote from macom: “Have a look at [HOW-TO] [Docker] Glances (monitoring tool) (all omv versions) and webmin. ” That's interesting! But like the OP I was looking for something with some graphics and history (like a frphycs of my CPU,RAM,ecc. usage in the last year). I know it will take some space but I have a 50GB HDD so I think it should be enough. Grafana looked extremely good! Can I follow this guide? docs.grafana.org/installation/docker/

  • Synctoy type plugin

    Blabla - - Plugins

    Post

    Why not use something on Windows server instead of the nas?