Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Network over Smartphone

    WastlJ - - Network

    Post

    Also tut mir leid, aber auch nach mehrmaligem durchlesen bin ich nicht schlauer als vorher. Was versuchst du zu tun? Deine OMV Hardware ins W-Lan einbinden? Das Handy als Hotspot verwenden? Wenn das Gerät einen anderen Adressbereich verwendet, kannst du dich entweder mit NAT beschäftigen (sofern Android das kann) oder ggf. statisch verteilen.

  • If you have a spare hdd, you can try to install OMV 4 and just exchange the OS drives. Then mount your data drives. If it works well - just keep on using it. If not, switch back

  • Changing OS disk

    WastlJ - - General

    Post

    Data disks will not get harmed if you change the OS drive. (Please unplug them while installing on your new OS drive!) IMHO it is not worth making a backup from the OS drive and fiddling it onto a new drive. I´m always installing OMV freshly onto the new drive, mount the data drives and configure everything from scratch. Takes about 1 hour - done. However - a backup of your data (depending on how important it is) is always a good idea.

  • OMV does just sit on top of Debian. Therefore if Debian releases updates you still receive them. And guess what, those are such updates So, OMV itself would appear in that list. Just out of curiosity - why don´t you want to move?

  • Autoshutdown funktioniert nicht

    WastlJ - - Plugins

    Post

    schon mal dein LOG geprüft?

  • OMV4 +Raid

    WastlJ - - General

    Post

    Hast du die via OMV formatiert oder extern? Ansonsten nochmal direkt via OMV formatieren.

  • geplante Aufgaben funktioniert nicht

    WastlJ - - General

    Post

    Quote from tklustig: “Dieses Forum ist nicht wirklich eine Hilfe bei der Bewältigung diverser Probleme: ” Die Überwiegende Mehrheit an kompetenten Helfern hier spricht Englisch. Wenn du binnen 24 Stunden eine Antwort erwartest, für ein Problem, was nicht den eigentlichen Sinn dieses Forums inne hält, nämlich OpenMediaVault-Probleme zu supporten, dann bist du hier definitiv falsch. Darum, erst googlen, wenn du dann nicht wie jetzt hier auch dein Problem selbst lösen kannst, kannst du gern einen T…

  • Autoshutdown funktioniert nicht

    WastlJ - - Plugins

    Post

    Kann noch jemand testen, ob die Commands via CLI (nicht) funktionieren: pm-hibernate pm-suspend-hybrid

  • Moving from OMV 2.x to OMV 4

    WastlJ - - Updates/Upgrades

    Post

    1. Shutdown your NAS 2. Unplug all data disks 3. Install OMV on your system disk 4. Plug your data drives back in 5. Boot OpenMediaVault 6. Switch to system >> Update Manager >> Click "Check" >> Mark all the updates >> Click "Upgrade" 7. Switch to Storage >> File Systems >> Click your File System >> Click "Mount" 8. Install your wanted plugins 9. Reconfigure your users, plugins, services 10. Done.

  • Why is ACL Greyed out?

    WastlJ - - General

    Post

    What filesystem is on your disk?

  • jdownloader doesn't start after update

    WastlJ - - Plugins

    Post

    Same for OMV3. Why don´t you try the Docker way? And have you tried this?? Quote from WastlJ: “What does you JD output if you try to start it manually via CLI? ”

  • Clean up or Re-Install?

    WastlJ - - General

    Post

    It still is. End of this POST - not thread. Btw. this thread is from 2014..

  • Debian 9 on QNAP TS-210 + OMV

    WastlJ - - My NAS Build

    Post

    What debian version is installable? Jessie >> Install OMV3 on Debian Jessie Stretch >> Install OMV4 on Debian 9 (Stretch)

  • Quote from Genna: “As i have all my data on Raid HW and HDDs managed by HW raid card, if i wipe my ssd to install a new OMV, do i have risk to lost all my datas ? ” Nope. Just unplug every data drive while installing on a new system drive. After the first complete boot, shutdown the system, connect the drives, boot up and mount them again.

  • Just plugin everything into your new system, boot up. Maybe you need to start omv-firstaid to reconfigure your network settings locally. After you are online again, mount your drives - thats it.

  • Plex local (private) usage

    WastlJ - - Plugins

    Post

    Have a look at the bottom right corner - is there any link you can click?

  • Try to update-grub via CLI. If that is not enough you can try to fix GRUB by doing the following steps. You first have to change the "X" to your system drive. Shell-Script (3 lines)

  • How do you check the access at the moment? This does not need a plugin. Maybe a Cronjob

  • jdownloader doesn't start after update

    WastlJ - - Plugins

    Post

    Guys. I don´t think there will be any updates in the future. Have you tried the Docker method? JD is also available as a Docker image. This is the way to go. However, if you prefer to use it as a plugin, you may need to fix something after every update. What does you JD output if you try to start it manually via CLI?

  • Many plugins are no more necessary because the Devs try to use Docker more and more. There is also a Sabnzbd container available.