Search Results

Search results 1-20 of 35.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    Check my post 18h10 31/03

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    i do , but webui is not update ...

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    I have a good network config now , VPN for my transmission service and all other with eth1. I get the port forwarding with provider API (curl request , cf page 2), then i update my transmission port with: - transmission-remote $port - update "peer-port" of json ( /etc/transmission-daemon/settings.json) -restart transmission daemon Now i have 2 problems (again ...): 1) transmission logs : "could not connect to tracker" (/var/log/transmission-daemon ) 2) my transmission WebUI don't take the good "…

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    Now i get my port number via curl request, i use this for update transmission: Source Code (1 line) Command is succefull , but my torrent doesn't work. I think i need update json conf file of transmission and update the new port "peer-port" I try "sed" command for replace Source Code (1 line) by my new port. But it doesn't work. Can you help me for "sed" command or anything for edit my json file ? Thanks

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    It's good i use --interface tun0 on my curl request and i get my Port

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    I think it's just a route problem on my NAS, because a guy have the same problem and post this: @VPN: solved it ... the https request was not going via the VPN tunnel. Could you please mention that aspect clearly in the 1st post? i.e. that the https request needs to be routed via the PIA VPN or else you get this error. cf : privateinternetaccess.com/foru…ication-advanced-users/p4 I just need toi know how i can route my curl request in the VPN.

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    Ok i have write a script with curl request. I get : "{port forwarding not avaible for this region.}" In forum they say : "Please make sure that the HTTPS call is routed out over the OpenVPN tunnel, if you're utilizing a setup where not all traffic is routed, you will need to write your code to properly route the call over the tunnel!" How can i route this request over my VPN ( edit iproute script? ) ? script curl (/etc/openvpn/PortForwarding.sh): Source Code (4 lines)

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    I have : Initialization Sequence Completed when i start openvpn Thanks for API , i don't see that i need send request for port forwarding to provider. At the moment i try to use curl request but i get a certif error ( but my script run in /etc/openvpn/ and ca.cert is in this )

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    iptables -S Source Code (12 lines) route -n Source Code (3 lines)

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    actually i run script1 manually. script1 is from this of tuto: Source Code (17 lines) Then i run my openvpn by /etc/init.d/openvpn restart so script 2 is run auto with up command. For eth0 my interface is eth1 on OMV WebUi, i think is the static IP config because i see eth1 config in /etc/network/interfaces I will post route on next post

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    I replace this for my config: script1 (/usr/bin/vpn-config.sh): VPNUSER="vpnuser" replace by => "debian-transmission" LANIP="192.168.1.0/24" i don't replace this , i should ? ( my NAS IP is static 192.168.1.99) export NETIF="br0" replace by => "eth1" script2 (/etc/openvpn/up-vpn.sh) : VPNUSER="vpnuser" replace by "debian-transmission" route ip : 200 vpnuser replace by 114 debian-transmission ipv4.conf (/etc/sysctl.d/99-openmediavault.conf): net.ipv4.conf.all.rp_filter = 0 net.ipv4.conf.default.r…

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    Ok , i try your tutorial , thank you. Now my VPN is correctly launch and i can send request via my 9091 port for start a torrent file on my NAS. But the torrent client (transmission) doesn't work. In transmission log : "could not connect to tracker" How can i test my VPN is OK for tracker ? (without a .torrent file )

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    Thx for torrent . Can you explain to me , how you split your connection ?

  • Re: VPN client with OMV + transmission

    Ifit - - General

    Post

    bump

  • Re: VPN client with OMV

    Ifit - - General

    Post

    I have instal transmission and all works Just what can i use to know if transmission use my VPN? What i want (my process): 1) Download Web site , "GO" on torrent 2) WebSite send request to transmission for start a torrent ( via my public IP,not VPN ) 3) My NAS with transmission start torrent via VPN 4) I'm happy Whitout VPN : - it's ok ( just step 3 is not with VPN) Whit VPN: - step 2 fail , but when i try in firefox url : mypublicip:9091 transmission is good ...

  • Re: VPN client with OMV

    Ifit - - General

    Post

    My bad, With VPN : 10.178.1.1 => 109.201.152.254 => ..... Without: 192.168.1.1 => 1.92.20.109.rev.sfr.net => ...

  • Re: VPN client with OMV

    Ifit - - General

    Post

    i think it's good : with VPN : 1) 10.179.1.1 => 109.201.154.254 => internet ... => google without : 2) 192.168.1.1 => 109.XX.XX.1 => .... => google So my OMV bittorent plugin will use this VPN ?

  • Re: VPN client with OMV

    Ifit - - General

    Post

    Yes sorry , i m beginner with debian/linux. It s work , now i will search on web tutorial to read traceroute response.

  • Re: VPN client with OMV

    Ifit - - General

    Post

    I try but with " & " i can't enter my usename + password ... So i can't test traceroute.

  • Re: VPN client with OMV

    Ifit - - General

    Post

    I have instal openvpn and i think it's good : 1) apt-get install openvpn 2) copy ca.crt in /etc/openvpn (file from provider) 3) open-vpn --config /etc/openvpn/xxxx.ovpn (file from provider) 4) Connected with message "Initialization Sequence Completed"( i think it s good) So i find this on OMV network interface: 316651network.png How can i be sure that OMV use this VPN interface ? When i launch "open-vpn --config /etc/openvpn/xxxx.ovpn" , why i can't write another command ( block while openvpn is…